A Sodiophilic Interphase‐Mediated,Dendrite‐Free Anode with Ultrahigh Specific Capacity for Sodium‐Metal Batteries

Despite efforts to stabilize sodium metal anodes and prevent dendrite formation, achieving long cycle life with high areal capacities remains difficult owing to a combination of complex failure modes that involve retardant uneven sodium nucleation and subsequent dendrite formation. Now, a sodiophilic interphase based on oxygen‐functionalized carbon nanotube networks is presented, which concurrently facilitates a homogeneous sodium nucleation and a dendrite‐free, lateral growth behavior upon recurring sodium plating/stripping processes. This sodiophilic interphase renders sodium anodes with an ultrahigh capacity of 1078 mAh g^?1 (areal capacity of 10 mAh cm^?2), approaching the theoretical capacity of 1166 mAh g^?1 of pure sodium, as well as a long cycle life up to 3000 cycles. Implementation of this anode allows for the construction of a sodium–air battery with largely enhanced cycling performance owing to the oxygen functionalization‐mediated, dendrite‐free sodium morphology.     

Efficient Non-Fullerene Organic Solar Cells Based on a Wide-Bandgap Polymer Donor Containing an Alkylthiophenyl-Substituted Benzodithiophene Moiety

Two wide-bandgap polymer donors containing an alkylthiophenyl substituted benzo[1,2-b : 4,5-b′]dithiophene moiety, namely PTZPO and PTZPS, were designed and synthesized. Both polymers exhibit relatively wide optical bandgap of 1.95 V with similar absorption profiles. The polymer PTZPS with alkylthiophenyl substituted benzo[1,2-b : 4,5-b′]dithiophene units showed enhanced light-harvesting capabilities, leading to improved short-circuit current densities. The PTZPS : ITIC film shows more appreciable film morphology and phase separation than the film composed of a blend of ITIC with alkoxyl substitutions containing copolymer PTZPO, which facilitates exciton dissociation and charge transport. The PTZPS : ITIC-based non-fullerene organic solar cells show clearly improved short-circuit current density and an impressively high power conversion efficiency of more than 11 %. These observations demonstrate the great promise of using PTZPS as electron-donating materials for high-performance non-fullerene organic solar cells.     

Laser assisted ultrasound guided aspiration improves procedure time and reduces number of withdrawals

This study evaluated the performance of in-vitro freehand aspiration of a simulated cyst with ultrasound aspiration guided by a newly designed laser assisted (LA) device. The LA device was equipped with an adjustable light source generating a sector light plane. This laser light plane was parallel to and overlapped the ultrasound acoustical plane, to help with needle positioning. Five operators randomly performed 30 freehand or LA ultrasound guided aspirations of a simulated cyst. The frequency was set at 8 MHz and depth at 4 cm. Procedure time and number of syringe withdrawals were statistically compared before and after using the LA device. Both experienced and inexperienced operators required significantly less time to perform the aspiration and had fewer syringe withdrawals when using the LA device. The LA device provides a reference plane in space, allowing the operator to more accurately position and adjust needle direction. Additional in-vivo testing is required to test the clinical practicability.     

Emission of 1.53 microm originating from the lattice site of Er3+ ions incorporated in TiO2 nanocrystals

Er(3+)-ion-doped anatase TiO(2) nanocrystals were prepared by simple wet chemical synthesis. Very sharp and intense near-infrared luminescence at approximately 1.53 microm was observed that originated from the lattice site of Er(3+) ions incorporated in TiO(2) nanocrystals. Based on the high-resolution emission and excitation spectra at 10 K, an efficient energy transfer from the TiO(2) host to Er(3+) ions was verified. The luminescence decay for the I13/24-->I15/24 transition at 1.53 microm showed nonexponential characteristics, indicating a nonradiative relaxation to the defects in the nanocrystals, and the intrinsic lifetime of the I13/24 state was determined to be 1.56 ms.     

Nanoparticles-doped guest-host liquid crystal displays

The technique, nanoparticles-induced vertical alignment (NIVA), was applied to fabricate a guest-host liquid crystal display (GH-LCD) without conventional alignment layers. The GH-LCD produced by NIVA exhibited a high reflectance of approximately 59% in the voltage-off state and a low threshold voltage of approximately 2.1 V(rms). NIVA is very suitable to be applied for fabricating a plastic LCD requiring a low temperature process, and a flexible timepiece by using NIVA was demonstrated.     

Modulation of the polarization state of light using a weak anisotropic thin film

The polarization state of light is modulated by an anisotropic thin film. An anisotropic MgF(2) film is deposited onto a plate that is put in contact with a BK7 prism to form a BK7 prism/film/air configuration. It is shown that the polarization state of reflected light can be easily modulated from a linear state to a circular state by rotating the thin-film plate.     

Adjoint-based optimization of PDEs in moving domains

In this investigation we address the problem of adjoint-based optimization of PDE systems in moving domains. As an example we consider the one-dimensional heat equation with prescribed boundary temperatures and heat fluxes. We discuss two methods of deriving an adjoint system necessary to obtain a gradient of a cost functional. In the first approach we derive the adjoint system after mapping the problem to a fixed domain, whereas in the second approach we derive the adjoint directly in the moving domain by employing methods of the noncylindrical calculus. We show that the operations of transforming the system from a variable to a fixed domain and deriving the adjoint do not commute and that, while the gradient information contained in both systems is the same, the second approach results in an adjoint problem with a simpler structure which is therefore easier to implement numerically. This approach is then used to solve a moving boundary optimization problem for our model system.     

Fabrication of microelectrodes deeply embedded in LiNbO3 using a femtosecond laser

We present a novel technique to fabricate deeply embedded microelectrodes in LiNbO₃ using femtosecond pulsed laser ablation and selective electroless plating. The fabrication process mainly consists of four steps, which are (1) micromachining of microgrooves on the surface of LiNbO₃ by femtosecond laser ablation; (2) formation of AgNO₃ films on substrates; (3) scanning the femtosecond laser beam in the fabricated microgrooves for modification of the inner surfaces; and (4) electroless copper plating. The void-free electroless copper plating is obtained with appropriate cross section of microgrooves and uniform initiation of the autocatalytic deposition on the inner surface of grooves. The dimension and shape of the microelectrodes could be accurately controlled by changing the conditions of femtosecond laser ablation, which in turn can control the distribution of electric field inside LiNbO₃ crystal for various applications, opening up a new approach to fabricate three-dimensional integrated electro-optic devices.     

Cell adhesive ability of a biological foam ceramic with surface modification

Biological foam ceramic is a promising material for tissue engineering scaffold because of its biocompatibility, biodegradation and adequate pores measured from micrometer to nanometers. The aim of this study was to evaluate the adhesion and proliferation of adipose-derived stromal cells (ADSCs) on the biological foam ceramic coated with fibronectin. ADSCs were harvested from SD rats and passaged three times prior to seeding onto biological foam surface modified with fibronectin (50 μg/ml). Scaffold without surface modification served as control. To characterize cellular attachment, cells were incubated on the scaffold for 1 h and 3 h and then the cells attached onto the scaffold were counted. The difference of proliferation was appraised using MTT assay at day 1, 3, 5 and 7 before the cells reached confluence. After 7 days of culture, scanning electron microscope (SEM) was chosen to assess cell morphology and attachment of ADSCs on the biological foam ceramic. Attachment of ADSCs on the biological foam ceramic surface modified with fibronectin at 1 h or 3 h was substantially greater than that in control. MTT assay revealed that ADSCs proliferation tendency of the experimental group was nearly parallel to that of control. SEM view showed that ADSCs in the experimental groups connected more tightly and excreted more collagen than that in control. The coating of fibronectin could improve the cell adhesive ability of biological foam ceramics without evident effect on proliferation.