Influence of preparation methods on structure and properties of PA6/PA66 blends: A comparison of melt‐mixing and in situ blending

The blends composed of polyamide 6 (PA6) and polyamide 66 (PA66) were obtained using two different preparation methods, one of which was the melt‐mixing through a twin‐screw extruder and the subsequent injection molding; and the other, the in situ blending through anionic polymerization of ε‐caprolactam in the presence of PA66. For the former, there existed a remarkable improvement in toughness but a drastic drop in strength and modulus; however, for the latter, a reverse but less significant trend of mechanical properties change appeared. Various characterizations were conducted, including the analyses of crystalline morphology, crystallographic form, and crystallization and melting behaviors using polarized optical microscopy (POM), wide‐angle X‐ray diffraction (WAXD), and differential scanning calorimetry (DSC), respectively; observation of morphology of fractured surface with scanning electron microscope (SEM); measurement of glass transition through dynamic mechanical analysis (DMA); and the intermolecular interaction as well as the interchange reaction between the two components by Fourier transform infrared spectrometry (FT‐IR) and ¹³C solution NMR. The presence and absence of interchange reaction was verified for the in situ and melt‐mixed blends, respectively. It is believed that the transreaction resulted in a drop in glass transition temperature (T_g) for the in situ blends, contrary to an increase of T_g with increasing PA66 content for the melt‐mixed ones. And the two kinds of fabrication methods led to significant differences in the crystallographic form, spherulite size and crystalline content and perfection as well. Accordingly, it is attempted to explain the reasons for the opposite trends of changes in the mechanical properties for these two blends. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1176–1186, 2007     

Synthesis and thermal crosslinking of oxazolidine‐functionalized polyurethanes

A new oxazolidine derivative was obtained from phenol, 2‐amino‐2‐methylpropane‐1,3‐diol and paraformaldehyde. The reaction of this novel oxazolidine diol with phenylisocyanate lead to a urethane model compound which can be polymerized thermally by oxazolidine ring opening to give a Mannich bridge structure. Linear segmented polyurethanes were prepared by reaction of different ratios of oxazolidine diol and commercial polyethylenglycol (M_w ～ 400) with 4,4′‐methylenbis (cyclohexylisocyanate) (HMDI, 90% isomers mixture). The polyurethanes were thermally characterized and crosslinked by oxazolidine ring opening to obtain materials which showed improved thermal stability. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4965–4973, 2007     

Interface analysis of the system Si/YBa2Cu3O7?x

Summary The influence of different preparation conditions and substrate surface orientations on the superconducting properties of thin YBa₂Cu₃O_7–x (YBCO) films on silicon was studied. Comparative electrical and surface spectroscopic measurements were performed. SAM and SIMS depth profile analysis show an enrichment of barium at the interface between the superconductor and silicon for samples with T_c<76 K. Comparison with XPS data obtained for thin silicon films on YBCO indicates the formation of barium and yttrium silicates at the interface under these conditions.     

Synthesis and thermal behaviour of salicylaldimine-based liquid crystalline symmetrical dimers

A series of symmetrical dimers consisting of salicylaldimine moieties connected by flexible alkylene central spacer via ether linkages has been synthesized. In order to validate the empirical rule suggested by Date et al. to account for the smectic behaviour of such dimers, the chain length of the terminal alkoxy chain has been kept constant (C₈) while the number of methylene units in the central spacer was varied from C₃ to C₁₁. Another aim of the present investigation was to understand structure-property relationship in these dimers in which the salicylaldimine mesogenic segment has been used for the first time in dimers. The mesomorphic behaviour of these dimers was evaluated using optical microscopy and differential scanning calorimetry and the structure of some of the mesophases has been further investigated with the help of X-ray diffraction. Our studies reveal that the dimers consisting of 3 to 8 methylene units in the flexible spacer show only smectic (smectic C and smectic A) phases. For the dimers containing 4, 6 and 8 methylene units in the central spacer, a unique filament growth pattern has been observed in the smectic A phase while cooling from the isotropic phase. The dimers containing of C₉ to C₁₁ methylene groups exhibit the nematic phase in addition to smectic modifications. This observation indicates that when the terminal chains are shorter than the spacer, the tendency to form smectic phases is not fully extinguished but is perhaps reduced.     

Impact of two mass scale oscillations on the analysis of atmospheric and reactor neutrino data

We study the stability of the results of the three-neutrino oscillation analysis of atmospheric and reactor neutrino data under departures of the one dominant mass scale approximation. In order to do so we perform the analysis of atmospheric and reactor neutrino data in terms of three-neutrino oscillations where the effect of both mass differences is explicitly considered. We study the allowed parameter space resulting from this analysis as a function of the mass splitting hierarchy parameter which parameterizes the departure from the one dominant mass scale approximation. We consider schemes with both direct and inverted mass ordering. Our results show that in the analysis of the atmospheric data the derived range of the largest mass splitting, , is stable, while the allowed ranges of mixing angles and are wider than those obtained in the one dominant mass scale approximation. Inclusion of the CHOOZ reactor data in the analysis results in the reduction of the parameter space in particular for the mixing angles. As a consequence the final allowed ranges of the parameters from the combined analysis are only slightly broader than when obtained in the one dominant mass scale approximation. Received: 31 May 2002 / Revised version: 10 July 2002 / Published online: 31 October 2002     

Synthesis,characterization, and micellization of an epoxy‐based amphiphilic diblock copolymer of ϵ‐caprolactone and glycidyl methacrylate by enzymatic ring‐opening polymerization and atom transfer radical polymerization

Amphiphilic diblock copolymer polycaprolactone‐block‐poly(glycidyl methacrylate) (PCL‐b‐PGMA) was synthesized via enzymatic ring‐opening polymerization (eROP) and atom transfer radical polymerization (ATRP). Methanol first initiated eROP of ?‐caprolactone (?‐CL) in the presence of biocatalyst Novozyme‐435 under anhydrous conditions. The resulting monohydroxyl‐terminated polycaprolactone (PCL–OH) was subsequently converted to a bromine‐ended macroinitiator (PCL–Br) for ATRP by esterification with α‐bromopropionyl bromide. PCL‐b‐PGMA diblock copolymers were synthesized in a subsequent ATRP of glycidyl methacrylate (GMA). A kinetic analysis of ATRP indicated a living/controlled radical process. The macromolecular structures were characterized for PCL–OH, PCL–Br, and the block copolymers by means of nuclear magnetic resonance, gel permeation chromatography, and infrared spectroscopy. Differential scanning calorimetry and wide‐angle X‐ray diffraction analyses indicated that the copolymer composition (?‐CL/GMA) had a great influence on the thermal properties. The well‐defined, amphiphilic diblock copolymer PCL‐b‐PGMA self‐assembled into nanoscale micelles in aqueous solutions, as investigated by dynamic light scattering and transmission electron microscopy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5037–5049, 2007     

Sensitive monitoring of humic acid in various aquatic environments with acidic cerium chemiluminescence detection.

In this research, a simple, sensitive chemiluminescence (CL) method for the determination of humic acid (HA) in water samples was first developed based on the redox reaction between humic acid and cerium(IV) in the acidic condition. Different with the former redox CL reaction which occurred in alkaline solution, no enhancers were needed and neither precipitation nor a second contamination would occur in the present CL system. Comparing with other spectrometric methods, we find that the proposed analysis system had better applicability and accuracy. Under the optimal experiment conditions, the CL peak height was linear with the concentration of HA in the range of 0.03 to 10.0 microg mL(-1). The detection limit is 0.01 microg mL(-1) (S/N = 3), and the relative standard deviation was 2.3% for 0.5 microg mL(-1) HA solution with eleven repeated measurements. The present CL method was successfully applied to the determination of HA in tap water, spring water and river water samples with good recovery from 90.0 to 110.0%. A possible CL mechanism was proposed based on the results of UV and fluorescence spectrometry and the CL spectrum of HA. It was speculated that the semi-quinone radicals in the excited state were the emitters.     

Synthesis and optoelectronic properties of silole‐containing polyfluorenes with binary structures

2,5‐Bis(2‐bromofluorene‐7‐yl)silole was prepared by a modified one‐pot synthesis with a reverse addition procedure, from which novel silole‐containing polyfluorenes with binary random and alternating structures (silole contents between 4.5 and 25% and high M_w up to 509 kDa were successfully synthesized. The well‐defined repeating unit of the alternating copolymer comprises a terfluorene and a silole ring. Optoelectronic properties including UV absorption, electrochemistry, photoluminescence (PL), and electroluminescence (EL) of the copolymers were examined. The different excitation energy transfers from fluorene to silole of the copolymers in solution and in the solid state were compared. The films of the copolymers showed silole‐dominant green emissions with high absolute PL quantum yields up to 83%. EL devices of the copolymers with a configuration of ITO/PEDOT/copolymer/Ba/Al displayed exclusive silole emissions peaked at around 543 nm and the highest EL efficiency was achieved with the alternating copolymer. Using the alternating copolymer and poly(9,9‐dioctylfluorene) as the blend‐type emissive layer, a maximum external quantum efficiency of 1.99% (four times to that of the neat film) was realized, which was a high efficiency so far reported for silole‐containing polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 756–767, 2007