Determination of trace amounts of total arsenic in environmental samples by hydride generation flow injection-AAS using a mixed acid as a pretreatment agent.

A method is described for the determination of total arsenic by hydride generation-atomic absorption spectrophotometry using a mixed acid as a pretreatment. Hydride generation is done by the flow-injection method. The authors investigated in detail the temperature and time of decomposition using inorganic, organic arsenic and environmental standard samples, pretreated with nitric-perchloric-sulfuric mixed acid. By using a mixed acid as a pretreatment agent at 220 degrees C, the decomposition time could be shortened and the blank value of arsenic from the reagents used was reduced. The mixed acid of nitric-perchloric-sulfuric was also found to be effective as a pretreatment agent for organic arsenic compounds in which a dimethylated compound, sodium cacodylate or biological samples, is known to be one of the indecomposables. The present approach was proved to be satisfactory as a pretreatment for the quantitative analysis of trace amounts of total arsenic in liquid or solid environmental samples, such as geothermal water, sediments and biological samples.     

Molecular orientation and mechanical anisotropy of polypropylene sheet containing N,N′‐dicyclohexyl‐2,6‐naphthalenedicarboxamide

Effect of mixing and processing conditions at T‐die extrusion on the structure and mechanical properties is studied for isotactic polypropylene (PP) containing a small amount of β‐form nucleating agent, N,N′‐dicyclohexyl‐2,6‐naphthalenedicarboxamide. It is found that trigonal β crystals are predominantly formed in the extruded samples containing the nucleating agent irrespective of the mixing and processing conditions, leading to the marked mechanical toughness. On the contrary, the molecular orientation is significantly affected by the mixing and processing conditions. In particular, it should be noted that PP molecules in the extruded sheet which was mixed at high temperature (260 °C) and extruded at low temperature (200 °C) orient perpendicular to the applied flow direction. As a result, the sheet shows anomalous mechanical anisotropy. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 424–433, 2009     

Mechanism of alternating copolymerization of 4-hydroxy-4′-vinylbiphenyl with α-chloromaleic anhydride

The copolymerization of 4-hydroxy-4′-vinylbiphenyl (HVB) with α-chloromaleic anhydride (CMAn) was investigated in THF, 1,4-dioxane, and acetonitrile. The formation of the 1:1 charge transfer complex between HVB and CMAn was confirmed spectroscopically, and the corresponding equilibrium constant (K_eq) was determined as follows: K_eq = 0.19, 0.11, and 0.058 mol/L in THF, 1,4-dioxane, and CH₃CN, respectively. The copolymer composition is affected by the solvent, i.e., the content of HVB in the copolymer obtained in THF or 1,4-dioxane is lower than 50 mol % whereas the copolymer obtained in CH₃CN has excess of HVB units. The maximum rate of copolymerization was observed at a 1:1 initial comonomer mole ratio, irrespective of the solvent polarity. Plots of R_p/[HVB] vs. [HVB] gave a straight line with a slope and an intercept for the copolymerization in THF whereas a straight line in CH₃CN has no slope. On the basis of these results and ¹³C-NMR spectra of the copolymers, the mechanism of the predominant formation of alternating copolymers is discussed.     

Single-shot polarization-imaging digital holography based on simultaneous phase-shifting interferometry

We propose single-shot digital holography which is capable of simultaneously capturing both the information of multiple phase-shifted holograms and the distribution of the polarization. In this technique, a single image sensor records both the information required for phase-shifting interferometry and that of the polarization states of objects using an array of polarizers. The essence of the technique is the capability of imaging the distribution of the polarization of three-dimensional objects with a single-shot exposure by using the space-division multiplexing of holograms. The validity of the proposed technique was confirmed by the preliminary experiments.     

A concise synthesis of Tamiflu: third generation route via the Diels-Alder reaction and the Curtius rearrangement

Our third generation synthesis of Tamiflu was achieved in 12 steps from commercially available starting materials, using the Diels-Alder reaction and Curtius rearrangement as key steps.     

A work softening joint element used in dynamic analysis of soil-structure

This paper introduces an elasto-plastic joint element characterised by strain hardening and softening in the analysis of dynamic soil-structure interaction. The phenomena of separation and sliding on the contact surface between soil and structure can be better simulated and the process can also be described. The interaction problems in a typical soil-structure system are analyzed in terms of elasto-plastic joint element as well as elastic ones. The results show that the elasto-plastic joint element is much better than the elastic one in modelling, especially in that the relative displacements accross the joint element can be much greater than that of the elastic case. Separation and sliding are not only related to the coefficient of friction and cohesion but also to their changes with plastic volumetric strain. The project is supported by the Sciences Foundation of the Chinese Academy of Sciences and the Disaster Provention Institute of Kyoto University (Japan).     

Shape and structure recovery of an LCP droplet under a large step strain: observation and stress calculation

Shape recovery of a droplet of liquid crystalline polymer (LCP) hydroxypropylcellulose in a matrix of poly(dimethyl siloxane) subjected to a step shear strain has been studied via optical microscopy. Just after application of a large strain, the LCP droplet shape is flat ellipsoid, and then the droplet takes cylindrical shape and band texture perpendicular to the flow direction appears. The band texture fades away before emergence of poly-domain structure. In the final process with the shape of spheroid, poly-domain structure recovers very slowly. Except for the final process, the shape change is identical with that of isotropic droplet at strains smaller than 3, when the LCP viscosity in Region II is taken as an equivalent viscosity for normalization. For a 20:80 blend, the excess relaxation modulus is calculated based on the Doi-Ohta theory, taking account of the distribution of droplet size and compared with experimental modulus data.     

Collisional Cross-Sections with T-Wave Ion Mobility Spectrometry without Experimental Calibration

A method for relating traveling-wave ion mobility spectrometry (TWIMS) drift times with collisional cross-sections using computational simulations is presented. This method is developed using SIMION modeling of the TWIMS potential wave and equations that describe the velocity of ions in gases induced by electric fields. The accuracy of this method is assessed by comparing the collisional cross-sections of 70 different reference ions obtained using this method with those obtained from static drift tube ion mobility measurements. The cross-sections obtained here with low wave velocities are very similar to those obtained using static drift (average difference?=?0.3%) for ions formed from both denaturing and buffered aqueous solutions. In contrast, the cross-sections obtained with high wave velocities are significantly greater, especially for ions formed from buffered aqueous solutions. These higher cross-sections at high wave velocities may result from high-order factors not accounted for in the model presented here or from the protein ions unfolding during TWIMS. Results from this study demonstrate that collisional cross-sections can be obtained from single TWIMS drift time measurements, but that low wave velocities and gentle instrument conditions should be used in order to minimize any uncertainties resulting from high-order effects not accounted for in the present model and from any protein unfolding that might occur. Thus, the method presented here eliminates the need to calibrate TWIMS drift times with collisional cross-sections measured using other ion mobility devices.

Open image in new window

Graphical Abstract ?

     

ISSUE INFORMATION

Modeling social‐ecological systems is difficult due to the complexity of ecosystems and of individual and collective human behavior. Key components of the social‐ecological system are often over‐simplified or omitted. Generalized modeling is a dynamical systems approach that can overcome some of these challenges. It can rigorously analyze qualitative system dynamics such as regime shifts despite incomplete knowledge of the model's constituent processes. Here, we review generalized modeling and use a recent study on the Baltic Sea cod fishery's boom and collapse to demonstrate its application to modeling the dynamics of empirical social‐ecological systems. These empirical applications demand new methods of analysis suited to larger, more complicated generalized models. Generalized modeling is a promising tool for rapidly developing mathematically rigorous, process‐based understanding of a social‐ecological system's dynamics despite limited knowledge of the system.