Development of a new file search system for nuclear magnetic resonance spectra: Production of an Enlarged Data Base and Search Test

A practical search system for proton n.m.r. spectra is reported. The coding rules and search algorithms are described in detail. Data for 8000 spectra have been converted into a computer-readable file from printed charts. Several search tests are used to evaluate the usefulness of the search system, and various effects of experimental conditions such as different instruments, frequencies and solvents on recall efficiency are described. The results presented indicate that the system should be applicable to routine analytical work.     

Output and picosecond amplification characteristics of an efficient and high-power discharge excimer laser

Improvements in output pulse energy and efficiency of a conventional capacitor-transfer-type discharge excimer laser with automatic preionization have been achieved by extending the discharge volume and resulting moderate pumping of the active medium. The discharge laser produces a pulse energy of more than 1 J for XeCl, KrF, and ArF lasers in square beams of about 2×2 cm², and the maximum overall efficiency observed is 2.9% for XeCl, 3.2% for KrF and 1.8% for ArF. The laser device has been involved in a picosecond ( 32 ps) XeCl laser amplification system, and was operated as an amplifier at a repetitive frequency of 10 Hz. Saturation fluence for XeCl laser was measured to be 1.4 mJ/cm², and the picosecond pulse energy of 40 mJ was extracted from the amplifier.On leave from Ebara Corp., 6-6-7, Ginza, Chuo-ku, Tokyo 104, JapanOn leave from Mitsubishi Heavy Industries, LTD., 4-6-22, Kan-on shinmachi, Nishi-ku, Hiroshima 733, Japan     

Estimation of useful yields for electrospray droplet impact/secondary ion mass spectrometry (EDI/SIMS)

Useful yield for electrospray droplet impact/secondary ion mass spectrometry was estimated. The mixtures of C₆₀/rhodamine B and C₆₀/Aerosol OT were used as the samples for the positive and negative mode of operations, respectively. By assuming that (i) the desorption efficiencies are about the same for C₆₀, rhodamine B and Aerosol OT, and (ii) desorption of ionic compounds directly gives the secondary ion signals, the useful yields (i.e. total ions generated divided by the total molecules desorbed) for C₆₀ were estimated to be ~0.1. This value should be regarded as the upper limit because the neutralization of positive and negative ions in the plume and desorption of ionic compounds as neutral species are not taken into account. Copyright © 2012 John Wiley & Sons, Ltd.     

Non‐vacuum field desorption ion source implemented under super‐atmospheric pressure

Standard field desorption (FD) ionization is implemented under high vacuum condition. In this paper, non‐vacuum FD is performed under a super‐atmospheric pressure environment using untreated tungsten wires as FD emitter, and the ion source was coupled to a commercial linear ion trap mass spectrometer. The operating pressure of the ion source was 6 bars which was high enough to provide sufficient dielectric strength to the working gas so that the high voltage that was required for FD could be applied to the emitter without occurrence of electrical discharge. Non‐volatile sample deposited on the bare tungsten wire FD emitter was heated by flowing direct current through the emitter. Similar to vacuum FD, the formation of conical protrusion of the liquefied sample layer under the strong electric field was also observed. Using the present ion source, high pressure field‐desorption of polar neutral compounds, organic salts and ionic liquids is demonstrated. Copyright © 2012 John Wiley & Sons, Ltd.     

Sulphur distribution in the products of waste tire pyrolysis

The aim of the presented work was to investigate the distribution of sulphur in tire pyrolysis products as well as the influence of process parameters (temperature and residence time) on sulphur distribution due to environmental concerns. Among modern methods used for waste tire recycling, pyrolysis is one of the most reasonable alternatives meeting current environmental standards. However, waste tire sulphur content can be a potential drawback for pyrolysis products utilisation as fuels. Sulphur is present in tires in different concentrations, depending on the type and age of the tires. Typical sulphur content in tires is about 1.6 mass %. In this paper, the distribution of sulphur in tire pyrolysis products was investigated. Tire pyrolysis yields three different products: liquid, gaseous, and solid residue composed mostly of carbon black (chars). Temperature and residence time are the two most important parameters affecting the yield and composition of the volatile fraction and they are therefore expected to affect the sulphur content in residues. Pyrolysis experiments were carried out in a laboratory pyrolysis reaction unit in the temperature range of 650°C to 750°C at different residence times: 88.6 s, 80.2 s, and 73.9 s. Liquid and solid products were analysed by elemental analysis and the distribution of total sulphur in tire pyrolysis products was calculated.     

High Pressure Super-Heated Electrospray Ionization Mass Spectrometry for Sub-Critical Aqueous Solution

The heating of electrospray ion source under atmospheric pressure is limited to the normal boiling point of the solution. The boiling takes place when the vapor pressure of the liquid at a given temperature equals the ambient pressure. By using a high pressure ESI source, which has been developed previously in our laboratory, a stable electrospray ionization of super-heated aqueous solution is performed up to a solution temperature of 180°C. The ion source is pressurized with pure nitrogen to a maximum pressure of 11 atm, and it is coupled to a commercial mass spectrometer via a custom-made ion transport capillary. A booster pump with variable pumping speed is added to the pumping system to regulate the pressure in the first pumping stage at 1?~?1.3 Torr. High pressure mass spectrometry is performed on several peptides and proteins to demonstrate its application in the temperature-controlled thermally induced denaturation and dissociation. Graphical Abstract

?     

Effects of Cations on Protein and Peptide Charging in Electrospray Ionization from Aqueous Solutions

The effects of eight different cations with ionic radii between 69 and 337 pm on the charging of peptides and proteins with electrospray ionization from aqueous acetate salt solutions are reported. Significant adduction occurs for all cations except NH₄ ⁺, and the average protein charge is lower when formed from solutions containing salts compared with solutions without salts added. Circular dichroism and ion mobility results show the protein conformations are different in pure water compared with salt solutions, which likely affects the extent of charging. The average charge of protein and peptide ions formed from solutions with Li⁺ and Cs⁺, which have Gibbs solvation free energies (GSFEs) that differ by 225 kJ/mol, is similar. Lower charge states are typically formed from solutions with tetramethylammonium and tetraethylammonium that have lower GSFE values. Loss of the larger cations that have the lowest GSFEs is facile when adducted protein ions are collisionally activated, resulting in the formation of lower analyte charge states. This reaction pathway provides a route to produce abundant singly protonated protein ions under native mass spectrometry conditions. The average protein and peptide charge with NH₄ ⁺ is nearly the same as that with Rb⁺ and K⁺, cations with similar GSFE and ionic radii. This indicates that proton transfer from NH₄ ⁺ to proteins plays an insignificant role in the extent of protein charging in native mass spectrometry.

Acidic‐pH‐Activatable Fluorescence Probes for Visualizing Exocytosis Dynamics

Live imaging of exocytosis dynamics is crucial for a precise spatiotemporal understanding of secretion phenomena, but current approaches have serious limitations. We designed and synthesized small‐molecular fluorescent probes that were chemically optimized for sensing acidic intravesicular pH values, and established that they can be used to sensitively and reliably visualize vesicular dynamics following stimulation. This straightforward technique for the visualization of exocytosis as well as endocytosis/reacidification processes with high spatiotemporal precision is expected to be a powerful tool for investigating dynamic cellular phenomena involving changes in the pH value.