Using photoelectron emission microscopy with hard-X-rays

We present several successful test cases of using photoelectron emission microscopy (PEEM) for photon energy up to 25 keV. First, the full extended X-ray absorption fine structure analysis was implemented in areas as small as 100 μm² for transition-metal K edge absorption spectra and, therefore, demonstrated the feasibility of combining structural and chemical analysis with hard-X-ray absorption spectroscopy with high lateral resolution. We also show that PEEM can be used in a transmission (radiography) mode as an imaging detector for hard-X-ray. This approach again leads to the unprecedented 0.3 μm lateral resolution, particularly critical for the use of coherence-based phase contrast techniques in real time X-ray radiology.     

Field emission properties and surface structure of nickel containing amorphous carbon

Nickel containing amorphous carbon (a-C:Ni) films have been deposited by filtered cathodic vacuum arc (FCVA) technique by introducing pure nickel into the graphite target. The field electron emission property of a-C:Ni was improved when compared to that of pure tetrahedral amorphous carbon (ta-C) by FCVA. The emission threshold field of a-C:Ni film is about 5 V μm⁻¹, whilst the threshold field of the ta-C film is about 13 V μm⁻¹. Raman spectroscopy suggests that the sp² clusters in the carbon film increase both in size and number when Ni is introduced. However, the emission was found to degrade to threshold fields beyond 20 V μm⁻¹ after the a-C:Ni film was left in ambient for a week. This observation is attributed to surface absorption of oxygen on the a-C:Ni film, as determined by X-ray Photoelectron Spectroscopy.     

Dynamic observation of an atom-sized gold wire by phase electron microscopy

A single-atom-sized gold wire was successfully observed in real time by a newly developed defocus-image modulation processing electron microscope. Because of phase retrieval processing with spherical aberration correction, the single-atom strand wire was observed with high contrast and without contrast blurring. By carefully looking at the atomic distance, the contrast, and the dynamic behavior of the wire, we recognized that there are two stages of the wire. In the first stage the wire maintained the atomic distance in the bulk crystal, but in the second stage the wire showed the atomic distance of the nearest-neighbor atoms with weaker contrast. The gold wire was rather stable for a few seconds under strong electron beam illumination.     

Dynamics and post-collision interaction effects in two electron decay from the Xenon 4d hole

Two Auger electrons, one very slow, one fast, have been detected in coincidence following near threshold 4d photoionization of the Xe atom. The distribution in the energy the two electrons share has been measured for the first time revealing the presence of post-collision interaction effects that provide unique information on the decay dynamics of the 4d hole. Analysis of the distorted line shapes indicates that the dominant process is decay of Xe+(4d(-1)) to Xe3+ through cascade emission of a zero kinetic energy Auger electron followed by a fast Auger electron. The widths of the intermediate Xe2+* states are estimated to be about 60 meV.     

Nanoscopic study of second-harmonic generation in organic crystals with collection-mode near-field scanning optical microscopy

Collection-mode near-field scanning optical microscopy (NSOM) is used to map nanoscopic second-harmonic generation (SHG) in N -(4-nitrophenyl)- (L) -prolinol crystals. A spatial resolution of 98 nm is achieved. Near-field polarization-dependent SHG measurement is performed, and a local effective SHG susceptibility of 224+/-18 pm/V is obtained.     

On the Populations of Neon Levels in the Low Temperature Plasma of a Hollow Cathode Discharge

Atomic levels population measurements constitute an essential contribution to various aspects of plasma research: balance and cross-section of inelastic processes, admixtures effects on level excitation mechanism, purposeful optimisation of plasma parameters etc. Atomic level populations in the negative glow of a hollow cathode discharge are of utmost interest in view of the peculiarities of the spectral source: a rich spectrum consisting of gas lines, lines of the cathode material and also lines of the substances introduced in the discharge; intensive atomic and ionic lines of high excitation potentials; small spectral linewidth, convenient for analytical purposes.     

Vibrational Frequencies of 1,4-Dithiane-1-oxide (DTMSO)

Abstract

The Raman and infrared spectra of 1,4-dithiane-1-oxide are reported in the frequency region from 4000 to 130 cm^?1, for polycrystall ine samples. The observed bands are assigned on the assumption of a Cs chair form with axial conformation. The fundamental frequencies are discussed and compared with those of 1,4-dithiane, pentanethylene sulfoxide and 1,4-oxathiane-4-oxide, The vibrational coupling among skeletal and S=0 deformations is discussed.     

Observation of Optical Second Harmonic Generation in Wet-Spun Films of Na-DNA

The observation of optical second harmonic generation (SHG) from wetspun films of Na-DNA is reported. The SHG signal is stronger at a relative humidity of 92% (corresponding to the B conformation of Na-DNA) than at low humidity of -33% (corresponding to a disordered conformation of Na-DNA). The strength of the SHG signal is also dependent on the orientation of the incident laser beam polarization with respect to the DNA helical axes.     

Orientation relationship in Eurofer martensitic steels

Both TEM and SEM/EBSD orientation measurements are carried out on a Eurofer97 martensitic steel. The influence of the prior austenitic grain size is studied using dedicated heat treatments. The intra laths misorientation is estimated by TEM. SEM/EBSD orientation mapping enable to study the actual orientation relationship (OR) between the parent austenitic phase and the martensitic phase. Neither the Nishiyama–Wasserman nor the Kurdjumov–Sachs OR is able to account for both the misorientation angle distributions, the pole figure and the misorientation axes measured. The mixed OR recently proposed by Gourgues et al. (Electron backscattering diffraction study of acicular ferrite, bainite, and martensite steel microstructures, Mater. Sci. Tech. 16 (2000), pp. 26–40.) and Sonderegger et al. (Martensite laths in creep resistant martensitic 9–12%Cr steels – Calculation and measurement of misorientations, Mater. Characterization (2006), in Press.) seems to be able to account for most of these results. Based on this OR, a new angular criterion is proposed to detect blocks of laths.     

Chemical synthesis and magnetic properties of HCP and FCC nickel nanoparticles

In this study, we successfully synthesized single-phase hexagonal closed packed (HCP) and face-centered cubic (FCC) nickel nanoparticles via reduction of nickel nitrate hexahydrate and nickel acetate tetrahydrate, respectively, in polyethylene glycol-200. Structural information of the as-synthesized nickel nanoparticles are studied by X-ray diffraction (XRD) as a function of the molar concentration of the nickel precursor. XRD results reveal that low concentrations of nickel precursor (0.005?M and below) favor the HCP, while high concentrations favor the mixture of HCP and FCC crystal structures. Particle size of HCP structure is found in the range of ～15?nm via transmission electron microscope analysis. Vibratory sample magnetometer is employed to study its magnetic behavior and the results reveal that FCC crystalline phase shows ferromagnetic nature with high saturation magnetization (M _s?～?39.6?emu?gm^?1) as compared to metastable HCP crystalline structure (M _s?～?2?emu?gm^?1). The surfactants bonding on the surface of nickel nanoparticles are studied.