Nelumbo nucifera leaves as source of water-repellent wax: Extraction through polar and non-polar organic solvents

Nelumbo nucifera leaves are rich source of natural wax possessing super-hydrophobic properties. It provides protection to them from ecological turbulences and climatic wear and tear. In this study, various experiments have been conducted to observe the yield of extraction and the determination of various functional groups, which are present in natural wax, derived from Nelumbo nucifera leaves. The natural wax has been extracted from lotus leaves through non-polar (hexane) and polar (ethanol) solvent via different extraction methods. The superhydrophobic wax has been successfully extracted with hexane. Whereas, ethanol did not extract the water-repellent wax of lotus leaf. Considering the cumulative amount, i.e. (desired + undesired), the maceration shows the extraction of 2.9% (%w/w, through hexane) and 10.2% (%w/w, through ethanol), while it was found 2.5% (%w/w, cycle period 15 min) and 9.0% (%w/w, cycle period 26 min) respectively, in case of Soxhlet extraction technique. For this specific case of natural wax recovery from biomass (lotus leaf), the maceration (traditional method) resulted a little bit superior extraction yield in comparison to the Soxhlet extraction method for extraction of crude wax. In the case of non-polar solvent (hexane), an extraction yield of 1.97% (%w/w) through maceration method was observed while in the case of non-polar solvent (ethanol), an extraction yield of 1.62% (%w/w) through Soxhlet extraction was observed. The TLC analysis on both types of extracts was performed. For the detection of various hydrocarbon chains in the crude wax extracts, FTIR was also performed. Topography of wax surface and wax-coated waterproof fabric was compared through SEM.     

Poly (methyl methacrylate) grafted wheat straw for economical and eco-friendly treatment of oily wastewater

Cellulose - The sustainable development of oil–gas and petrochemical industries necessitates the development of cost-effective and eco-friendly technologies to treat mass-produced oily...     

Surfactant mediated electrodeposition of copper nanostructures for environmental electrochemistry: influence of morphology on electrochemical nitrate reduction reaction

Journal of Solid State Electrochemistry - The development of materials with high active surface area/surface modification is of great interest in electrochemistry due to their widespread...     

Electro catalytic generation of reactive species at diamond electrodes and applications in microbial inactivation

Use of robust and safe water disinfection technologies which are inexpensive and energy-efficient are need of the hour to combat the problem of inadequate access of safe and clean drinking water. Energy and chemically intensive water treatment technologies warrant the need for a safe and environmentally sound treatment technology. Electrochemical disinfection or electrodisinfection (ED) is experiencing a great resurgence among the scientific communities owing to its novel use of electrode materials and electric current in an inexpensive and energy-efficient way for achieving the inactivation of microorganisms. Among the various electrodes used in the ED, boron-doped diamonds emerge as a sustainable alternate for their ability to electro generate strong potent oxidants which result in effective pathogen control in drinking water. ED for disinfecting waters occurs via generation of the reactive species which act in the bacterial inactivation mechanisms. In this mini-review, a critical discussion on the fundamentals and applications of promising electrochemical methods using boron-doped diamond anodes (namely electrochemical oxidation), evidencing their advantages for the remediation of drinking water infected with waterborne agents, is given.     

Indium-doped ZnOas efficient photosensitive material for sunlight driven hydrogen generation and DSSC applications: integrated experimental and computational approach

Electricity generation using simple and cheap dye-sensitized solar cells and photocatalytic water splitting to produce future fuel, hydrogen, directly under natural sunlight fascinated the researchers worldwide. Herein, synthesis of indium-doped wurtzite ZnO nanostructures with varying molar percentage of indium from 0.25 to 3.0% with concomitant characterization indicating wurtzite structure is reported. The shift of (002) reflection plane to higher 2θ degree with increase in indium-doping thus is a clear evidence of doping of indium in zinc oxide nanoparticles. Surface morphological as well as microstructural studies of In@ZnO exhibited generation of ZnO nanoparticles and nanoplates of diameter 10–30 nm. The structures have been correlated well using computational density functional (DFT) studies. Diffuse reflectance spectroscopy depicted the extended absorbance of these materials in the visible region. Hence, the photocatalytic activity towards hydrogen generation from water under natural sunlight as well as efficient DSSC fabrication of these newly synthesized materials has been demonstrated. In-doped ZnO exhibited enhanced photocatalytic activity towards hydrogen evolution (2465 μmol/h/g) via water splitting under natural sunlight. DSSC fabricated using 2% In-doped ZnO exhibited an efficiency of 3.46% which is higher than other reported In-doped ZnO based DSSCs.

     

Synthesis,antioxidant activity,and α-glucosidase enzyme inhibition of α-aminophosphonate derivatives bearing piperazine-1,2,3-triazole moiety

A novel series of piperazine-1,2,3-triazole bearing dimethyl(((2-(4-((1H-1,2,3-triazole-4-yl)methyl)piperazin-1-yl)ethylamino)(2-hydroxyaryl)methyl)phosphonate derivatives have been prepared via copper-catalyzed azide-alkyne 1,3-dipolar cycloaddition (CuAAC) (Click Reaction) and Schiff base reactions. The synthesized compounds were confirmed by spectral characterization (¹H, ¹³C and ³¹P NMR, and mass). The title compounds were evaluated for in vitro alpha glucosidase enzyme inhibition and in vitro antioxidant activity using DPPH and H₂O₂ methods.     

Ionic liquid mediated synthesis and in vitro mechanistic exploration of polycyclic cage-like heterocyclic hybrid

A three-component, [3 + 2]-cycloaddition/annulation domino protocol is described for the synthesis in excellent yield of a polycyclic cage-like heterocyclic hybrid (PCHH) that comprises various advantaged structural units viz., α,β-unsaturated ketone moiety, 4-pyridinone and pyrroloisoquinoline in a cage-like framework. The antitumor activity of PCHH on human breast (MCF7), colon (HCT116), cervical (JURKAT) and lung (NCI-H460) malignant cell lines inhibited the propagation of all cell lines. This hybrid molecule displayed increased broad-spectrum anticancer activity with higher doses of PCHH. Furthermore, the compound induced 45.21% of early apoptosis and 46.32% of late apoptosis in the Jurkat cancer cell line. Cell cycle analysis showed that this cage-like compound caused cell cycle arrest of Jurkat cells at the S phase and sub G0/G1 phase. Additionally, it led to increased DNA fragmentation and mitochondrial membrane permeabilization through activation of caspase-3 enzyme. Present investigation demonstrates the specific cytotoxic activity of the cage-like compound and the induction of apoptosis through the intrinsic pathway of Jurkat cells.     

One-pot multicomponent synthesis of N-sulfonyl amidines using magnetic separable nanoparticles-decorated N-heterocyclic carbene complex with copper

Research on Chemical Intermediates - Magnetic separable nanoparticles-decorated N-heterocyclic carbene complex with copper (MNP[1-Methyl benzimidazole]NHC@Cu) has been prepared by covalent grafting...     

Imaging of Bacterial and Fungal Cells Using Fluorescent Carbon Dots Prepared from <Emphasis Type="Italic">Carica papaya</Emphasis> Juice

In this paper, we have described a simple hydrothermal method for preparation of fluorescent carbon dots (C-dots) using Carica papaya juice as a precursor. The synthesized C-dots show emission peak at 461 nm with a quantum yield of 7.0 %. The biocompatible nature of C-dots was confirmed by a cytotoxicity assay on E. coli. The C-dots were used as fluorescent probes for imaging of bacterial (Bacillus subtilis) and fungal (Aspergillus aculeatus) cells and emitted green and red colors under different excitation wavelengths, which indicates that the C-dots can be used as a promising material for cell imaging.     

Studies on α-, β-, and γ-cyclodextrin inclusion complexes of isoquinoline alkaloids berberine, palmatine and coralyne

The complexation of three isoquinoline alkaloids berberine, palmatine and coralyne with α-, β-, and γ-CDs were studied by absorption, fluorescence, circular dichroism, NMR spectroscopy and microcalorimetric assay techniques. Their binding constant (K _BH) values were determined by Benesi–Hildebrand equation. All the alkaloids formed 1:1 stoichiometry complexes with the cyclodextrins (CDs). The binding affinity is largest in β-CD followed by γ-, and α-CD for coralyne, followed by berberine and then palmatine. The thermodynamic parameters of the complexation were determined by calorimetry. The stoichiometry of complex formation and the variation of the apparent binding constant from spectroscopic studies were confirmed by calorimetry. The formation of the inclusion complexes was entropy driven in almost all the systems. Coralyne formed the strongest complex with all the CDs, followed by berberine and palmatine in that order. Coralyne-β-CD complex was studied through NMR, indicating more than one interaction mode.