Facile and Sensitive Spectrophotometric Determination of Propoxur in Formulations and Environmental Samples

A facile, rapid, and sensitive spectrophotometric method for the determination of propoxur in insecticidal formulations, fortified water, vegetables, agricultural wastewater, and agricultural soil samples has been elaborated. The proposed method is based on the hydrolysis of propoxur under basic conditions, followed by instantaneous azo coupling of the resulting 2‐isopropoxyphenol with the anilines 2a – c . This yielded the orange‐red chromophore 3a (λ_max=at 470 nm), the pale‐red coupling product 3b (490 nm), or the red derivative 3c (478 nm), which are stable for 46 h, 38 h, and 24 h, respectively, and could be readily analyzed spectrophotometrically.     

Dimeric tetrahedral complexes of manganese(II) and iron(II) with benzoyl hydrazones

Summary Dimeric manganese(II)and iron(II)complexes, (ML)₂, derived from benzoyl hydrazones ofo-hydroxyaryl aldehydes and ketones arc described and characterised by elemental analyses and by conductance, molecular weight, magnetic, electronic and i.r. spectral measurements. The dimeric nature of the complexes is revealed by i.r. spectra which show bands atca. 885 Mn²⁺ and 820 cm^–1 Fe²⁺, characteristic of ring vibrations. The i.r. spectra reveal the terdentate nature of the ligands. The electronic spectra in dimethylformamide are consistent with the tetrahedral nature of the complexes. The appreciable lowering in _eff is attributed to the presence of exchange interactions between two paramagnetic atomsvia oxygen bridges.Reprints of this article are not available.     

Effect of axial ligation or pi-pi-type interactions on photochemical charge stabilization in "two-point" bound supramolecular porphyrin-fullerene conjugates

Two types of structurally well-defined, self-assembled zinc porphyrin-fullerene conjugates were formed by "two-point" binding strategies to probe the effect of axial ligation or pi-pi-type interactions on the photochemical charge stabilization in the supramolecular dyads. To achieve this, meso-tetraphenylporphyrin was functionalized to possess one or four [18]crown-6 moieties at different locations on the porphyrin macrocycle while fullerene was functionalized to possess an alkyl ammonium cation, and a pyridine or phenyl entities. As a result of the crown ether-ammonium cation complexation, and zinc-pyridine coordination or pi-pi-type interactions, stable zinc porphyrin-fullerene conjugates with defined distance and orientation were formed. Evidence for the zinc-pyridine complexation or pi-pi-type interactions was obtained from the spectral and computational studies. Steady-state and time-resolved emission studies revealed efficient quenching of the zinc-porphyrin singlet excited state in these dyads, and the measured rates of charge separation, k(CS) were found to be slightly better in the case of the dyads held by axial coordination and crown ether-cation complexation. Nanosecond transient absorption studies provided evidence for the electron transfer reactions, and these studies also revealed charge stabilization in these dyads. The lifetimes of the radical ion pairs were found to depend upon the type of porphyrins utilized to form the dyads, that is, porphyrin possessing the crown ether moiety at the ortho position of one of the phenyl rings yielded prolonged charge stabilized states. Addition of pyridine to the supramolecular dyads eliminated the zinc-pyridine coordination or pi-pi-type interactions of the "two-point" bound systems due to the formation of a new zinc-pyridine axial bond thus giving a unique opportunity to probe the effect of axial coordination or pi-pi interactions on k(CS) and k(CR). Under these conditions, the measured electron transfer rates revealed faster k(CS) and slower k(CR) as compared to those obtained in the absence of added pyridine. The evaluated lifetimes of the radical ion-pairs were found to be hundreds of nanoseconds and were longer in the presence of pyridine.     

Analysis of fragrances in cosmetics by gas chromatography–mass spectrometry

A gas chromatographic (GC)-mass spectrometric (GC-MS) method has been developed for the routine analysis of 11 fragrance substances in cosmetics: cinnamic alcohol, cinnamic aldehyde, eugenol, hydroxy citronellal, α-amyl cinnamic aldehyde, geraniol, isoeugenol, coumarin, dihydrocoumarin, citronellal and citral. Methods for sample preparation of various types of cosmetic products, prior to GC analysis, have also been developed and proved to be rugged. Detection limits of all of target fragrance substances were approximately 1 ppm. Calibration curves of the target fragrance substances analyzed by GC were found to be linear in the investigated concentration range, 0.005% – 0.50%. The recoveries of the target fragrances from various types of cosmetic products were 80% – 116% and the relative standard deviations of the quantitative analysis of the target fragrance substances were within 5%.     

Silicon tetrafluoride : Preparation and reduction with lithium aluminium hydride

Pure silicon tetrafluoride can be prepared in 66% yield from silicon tetrachloride by refluxing with lead fluoride in acetonitrile. The gas can be reduced to pure silane by lithium aluminum hydride in diethyl ether.     

Adhesion and debonding of soft elastic films: crack patterns, metastable pathways, and forces

We study the phenomenon of debonding in a thin soft elastic film sandwiched between two rigid plates as one of the plates is brought into intimate contact and then pulled away from contact proximity by application of a normal force. Nonlinear simulations based on minimization of total energy (composed of stabilizing elastic strain energy and destabilizing adhesive interaction energy) are employed to address the problems of contact hysteresis, cavitation, crack morphology, variation of contact area, snap-off distance, pull-off force, work done, and energy loss. Below a critical distance (d(c)) upon approach, simulations show the formation of columnar structures and nonrandom, regularly arranged nanocavities at the soft interface at a length scale of approximately 3h (h being the thickness of the film). The persistence of such instability upon withdrawal (distance >d(c)) indicates a contact hysteresis, which is caused by an energy barrier that separates the metastable states of the patterned configuration and the global minimum state of the flat film. The energy and the pull-off force are found to be nonequilibrium and nonunique properties depending on the initial contact, defects, noise, etc. Three broad pathways of debonding leading to adhesive failure of the interface, depending on the stiffness of the film, step size of withdrawal, and the imposed noise, are identified: a catastrophic column collapse mode, a peeling mode involving a continuous decrease in the contact area, and a column splitting mode. The first two modes are caused by a very high stress concentration near the cavity edges. These metastable patterned configurations engender pull-off forces that are orders of magnitude smaller than that required to separate two flat surfaces from contact.     

Synthesis, fluorescence and photoisomerization studies of azobenzene-functionalized poly(alkyl aryl ether) dendrimers

A series of azobenzene-functionalized poly(alkyl aryl ether) dendrimers have been synthesized and their photochemical and photophysical properties in solution and as thin films have been investigated. Although the photochemical behavior of the azodendrimers in solution indicated that the azobenzene units behave independently, very similar to the constituent monomer azobenzene unit, the properties of thin solid films of the dendrimers were distinctly different. The azodendrimers, AzoG1, AzoG2, and AzoG3 were observed to form stable supercooled glasses, which showed long-wavelength absorption and red emission characteristics of J-aggregates of the azobenzene chromophores. Reversible photoinduced isomerization of the azodendrimers in the glassy state is described.     

Design of a capillary-microreactor for efficient Suzuki coupling reactions

A Pyrex glass capillary (0.4 mm internal diameter) microreactor was developed and used for Suzuki coupling reactions. Capillary-microreactors are more attractive than photolithographic microfluidic devices in terms of simplicity, low cost and ease of handling. Compared with the conventional synthesis procedure, our approach of using a capillary-microreactor offers a convenient and highly efficient means to optimize reaction conditions and the performance of catalysts. The procedure exhibits good precision, reproducibility and high reaction yield for a range of reactants investigated.     

THE PHOTOSENSITIZERS BENZOPHENOXAZINE and THIAZINES: COMPREHENSIVE INVESTIGATION OF PHOTOPHYSICAL and PHOTOCHEMICAL PROPERTIES

Eight differently substituted title dye compounds have been investigated regarding intersystem crossing, triplet state, fluorescence and singlet excited state pKa properties. In general, non-halogenated oxazines and thiazines as well as a mono bromooxazine show very low triplet quantum yields, phi tau (less than 0.03) and relatively long triplet lifetimes (approximately 40 microseconds) in acidic methanol. The phi tau data correlate well with known singlet oxygen yields. In basic methanol no triplet transient is observed but a significant yield of a ground state transient protonated (base dye) form is produced with a short lifetime, approximately 400 ns. Fluorescence can be seen simultaneously from both the excited base and the protonated base dye forms in basic methanol. For iodinated oxazine or thiazines, the triplet yield increases and can be as high as 0.5 (diiodo case) in acidic methanol. The triplet lifetimes are further shortened to approximately 10 microseconds compared to the non-iodinated derivatives above. The triplet yields of the iodo compounds are higher or equal to known singlet oxygen yields. In basic methanol triplet yields up to 0.2 can be seen, the triplet lifetime are shortened still further to 1 microsecond but no observable protonated form is produced (in distinction to the non-iodinated cases). Consideration is given to the correlation of triplet and singlet oxygen yields, ground and excited pKa properties, spin-orbit coupling and internal conversion properties, solvent effects, and phototherapeutic activity of these dyes.     

Preparation of cobalt doped γ-Fe2O3 and Mn-Zn ferrites by the thermal decomposition of the hydrazine precursors

Fine particle cobalt doped-Fe₂O₃ and Mn-Zn ferrites have been prepared by the thermal decomposition of N₂H₅Co _x Fe_1–x (N₂H₃COO)₃.H₂O wherex=1–10 atom% and (N₂H₅)₃Mn_xZn_1–x Fe₂(N₂H₃COO)₉· 3H₂O wherex=0.2–0.8, respectively. Formation of these oxide materials has been confirmed by thermogravimetry and X-ray powder diffraction patterns. The fine particle nature of these oxide materials is evident from particle size analysis and surface area measurements.

---

Zusammenfassung Mit fein verteiltem Kobalt versetztes-Fe₂O₃ sowie Mn-Zn Ferrite wurden durch thermische Zersetzung von N₂H₅Co _x Fe_1–x (N₂H₃COO)₃·H₂O mit jc=1–10 Atomprozent bzw. (N₂H₅)₃Mn _x Zn_1–x Fe₂(N₂H₃COO)₉·3H₂O mitx=0,2–0,8 hergestellt. Die Bildung dieser Oxidstoffe wurde durch Thermogravimetrie und Pulverdiffraktionsmethoden bekräftigt. Die Feinkornstruktur dieser Oxidstoffe wird durch Korngrößenverteilungs- und Oberflächenmessungen augenscheinlich.

---

N₂H₅Co _x Fe_1–x (N₂H₃COO)₃·H₂O, x-1–10 %, (N₂H₅)₃Mn _x Zn_1–x Fe₂(N₂H₃COO)₉ · 3H₂O, x=0,2–0,8, , , -Fe₂O₃ Mn-Zn . . .