Sol-gel-coated oligomers as novel stationary phases for solid-phase microextraction

Amphiphilic and hydrophilic oligomers were synthesized and coated on fused silica capillaries using a sol-gel technique. Sol-gel-coated capillaries were evaluated for the solid-phase microextraction and preconcentration of a wide variety of non-polar and polar analytes. Both types of coatings were stable under high temperature (up to 280 degrees C). The extraction efficiency of the sol-gel coatings was evaluated for the extraction of both non-polar and polar analytes, including organochlorine pesticides, triazine herbicides, estrogens and alkylphenols (APs) and bisphenol-A (BPA). Compared with commercially available solid-phase microextraction (SPME) adsorbents such as poly(dimethylsiloxane)divenylbenzene and polyacrylate, the new materials showed comparable selectivity and sensitivity towards both non-polar and polar analytes. The new coatings gave good linearity and detection limits. For example with triazines, a detection limit of <0.005 microl l(-1), precision from 5.0 to 11.0% (n = 6) and linearity of the calibration plots (0.5 to 50 microl l(-1)) were obtained. The sol-gel coated SPME capillaries were used for the determination of triazine herbicides in reservoir water samples collected in Singapore.     

Antibody-recruiting protein-catalyzed capture agents to combat antibiotic-resistant bacteria

Antibiotic resistant infections are projected to cause over 10 million deaths by 2050, yet the development of new antibiotics has slowed. This points to an urgent need for methodologies for the rapid development of antibiotics against emerging drug resistant pathogens. We report on a generalizable combined computational and synthetic approach, called antibody-recruiting protein-catalyzed capture agents (AR-PCCs), to address this challenge. We applied the combinatorial protein catalyzed capture agent (PCC) technology to identify macrocyclic peptide ligands against highly conserved surface protein epitopes of carbapenem-resistant Klebsiella pneumoniae, an opportunistic Gram-negative pathogen with drug resistant strains. Multi-omic data combined with bioinformatic analyses identified epitopes of the highly expressed MrkA surface protein of K. pneumoniae for targeting in PCC screens. The top-performing ligand exhibited high-affinity (EC₅₀ ∼50 nM) to full-length MrkA, and selectively bound to MrkA-expressing K. pneumoniae, but not to other pathogenic bacterial species. AR-PCCs that bear a hapten moiety promoted antibody recruitment to K. pneumoniae, leading to enhanced phagocytosis and phagocytic killing by macrophages. The rapid development of this highly targeted antibiotic implies that the integrated computational and synthetic toolkit described here can be used for the accelerated production of antibiotics against drug resistant bacteria.

Antibody-recruiting protein-catalyzed capture agent (AR-PCCs) are a new class of all-synthetic and highly targeted antibiotics that recruit endogenous immune responses to eliminate drug-resistant microbes.     

Generic fast gradient liquid chromatography/tandem mass spectrometry techniques for the assessment of the in vitro permeability across the blood-brain barrier in drug discovery

Rapid, generic gradient liquid chromatography/tandem mass spectrometry (LC/MS/MS) assays, designed to accelerate sample analyses, have been developed to keep pace with the productivity of advanced synthetic procedures. In this study, LC/MS/MS was combined with an in vitro, cell-based, blood-brain barrier (BBB) model to evaluate the potential of new chemical entities (NCEs) to cross the BBB. This in vitro assay provides the permeability of discovery compounds across a monolayer of a primary culture of bovine brain microvessel endothelial cells in a fraction of the time that is required for in vivo studies (brain/plasma concentrations), using only 2 mg of the compound. The results are consistent with in vivo brain/plasma concentration ratio data.     

Preparation and characterization of bismaleimide/1,3-dicyanatobenzene modified epoxy intercrosslinked matrices

An intercrosslinked network of cyanate ester (CE)-bismaleimide (BMI) modified epoxy matrix system was made by using epoxy resin, 1,3-dicyanatobenzene and bismaleimide (N,N^′-bismaleimido-4,4^′-diphenyl methane) with diaminodiphenylmethane as curing agent. BMI-CE-epoxy matrices were characterised using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and heat deflection temperature (HDT) analysis. The matrices, in the form of castings, were characterised for their mechanical properties such as tensile strength, flexural strength and unnotched Izod impact test as per ASTM methods. Mechanical studies indicated that the introduction of cyanate ester into epoxy resin improves the toughness and flexural strength with reduction in tensile strength and glass transition temperature, whereas the incorporation of bismaleimide into epoxy resin influences the mechanical and thermal properties according to its percentage content. DSC thermograms of cyanate ester as well as BMI modified epoxy resin show an unimodal reaction exotherm. Electrical properties were studied as per ASTM method and the morphology of the BMI modified epoxy and CE-epoxy systems were studied by scanning electron microscope.     

An investigation on visible luminescence of Ho activated LBTAF glasses

Different concentrations of Ho³⁺-doped lead borate titanate aluminum fluoride (LBTAFHo) glasses with chemical composition of PbO-H₃BO₃-TiO₂-AlF₃-Ho₂O₃ were prepared by the melt quenching method. The spectral properties were investigated using the absorption, emission and decay measurements. The experimental oscillator strengths were calculated from the area under the absorption bands. Applying Judd-Ofelt theory, the intensity parameters (Ω_{λ=2, 4, 6}) were calculated, by the least square fit approach from which the radiative transition rates, luminescence branching ratios and radiative decay times were determined. The photoluminescence spectra revealed the quenching of luminescence intensity beyond 1.0 mol% of Ho³⁺ ion concentration. To investigate the luminescence potentiality of ⁵F₄→⁵I₈ emission level, the effective bandwidth and the stimulated emission cross-section were determined. The quenching in experimental decay time is attributed to the resonance energy transfer among the excited Ho³⁺ ions.     

Measurement and Modeling of Phase Equilibrium,Volumetric Properties and Molar Refractivity of 2-Methylpropan-2-ol + Ethane-1,2-diol

2-Methylpropan-2-ol, an important fine chemical, may be dehydrated during extractive distillation with glycols as entrainer. Experimental isobaric phase equilibrium studies were carried out on binary mixtures of 2-methylpropan-2-ol with ethane-1,2-diol, as an entrainer, at the local atmospheric pressure of 94.99 kPa and at sub-atmospheric pressures of 19.99, 39.99, 59.99, 78.79 kPa using a Sweitoslawski-type ebulliometer. The Wilson and NRTL activity coefficient models were used to correlate the experimental results and the binary interaction parameters were obtained using the Generalized Reduced Gradient optimization technique. UNIFAC was also used to predict the deviations in bubble temperatures. Moreover, the variation in density, refractive index values and other derived properties (excess molar volumes, partial molar volumes and deviations in molar refractivity) were explored at 303.15, 313.15, 323.15 and 333.15 K to understand the shift of equilibrium with the variation in the mixture composition for the conformational state of the molecules. The Redlich–Kister polynomial equation was used to correlate the excess molar volumes and deviations from molar refractivity. Different theoretical mixing rules (Lorentz–Lorenz, Wiener, Heller, Gladstone–Dale and Arago–Biot) are investigated and reported in terms of average percentage deviation. Furthermore, the Prigogine–Flory–Patterson theory was used to predict the trend of the dependence of excess molar volumes on composition for the present system.     

Cycloaddition profile of pentafulvenes with 3-oxidopyrylium betaine: experimental and theoretical investigations

A detailed investigation on the effect of solvent polarity, temperature, and microwave irradiation on periselectivity in cycloaddition reactions of pentafulvenes with 3-oxidopyrylium betaine is described. The base catalyzed generation of 3-oxidopyrylium betaine in CHCl₃ resulted in the exclusive formation of [6+3] adducts. With increase in solvent polarity and temperature, mixtures of [6+3] and [3+2] adducts were formed, where as under microwave irradiation, [3+2] adducts were formed exclusively. The experimental results have been rationalized on the basis of theoretical calculations.     

Effect of bovine serum albumin on the surface properties of ionic liquid-type Gemini surfactant

The effect of bovine serum albumin on the surface properties of IL-type gemini surfactant ([C₁₀-4-C₁₀im]Br₂), have been investigated by surface tension method. The critical micelle concentration (CMC) as a function of BSA concentrations at various temperatures was investigated. The CMC of [C₁₀-4-C₁₀im]Br₂ increases with increasing the concentration of BSA as well as the temperature of the system. The interfacial parameters viz; maximum surface excess concentration (Γ_max), the minimum area per molecule (A_min), and surface pressure at CMC (Π_cmc) were calculated. In addition, thermodynamic parameters of adsorption and micellization were evaluated by using surface tension data. The results indicated that the binding of [C₁₀-4-C₁₀im]Br₂ to BSA is spontaneous and exothermic in nature. The process is entropy driven and hydrophobic interactions are the major driving forces.     

Aptamer-based fluorometric determination of norovirus using a paper-based microfluidic device

Microchimica Acta - The authors describe a rapid and highly sensitive point-of-care device for rapid determination of noroviruses, a leading cause of acute gastroenteritis. The assay is based on...