Physicochemical characterization of an Indian traditional medicine, Jasada Bhasma: detection of nanoparticles containing non-stoichiometric zinc oxide

Herbs and minerals are the integral parts of traditional systems of medicine in many countries. Herbo-Mineral medicinal preparations called Bhasma are unique to the Ayurvedic and Siddha systems of Indian Traditional Medicine. These preparations have been used since long and are claimed to be the very effective and potent dosage form. However, there is dearth of scientific analytical studies carried out on these products, and even the existing ones suffer from incomplete analysis. Jasada Bhasma is a unique preparation of zinc belonging to this class. This particular preparation has been successfully used by traditional practitioners for the treatment of diabetes and age-related eye diseases. This work presents a first comprehensive physicochemical characterization of Jasada Bhasma using modern state-of-the-art techniques such as X-ray photoelectron spectroscopy (XPS), inductively coupled plasma (ICP), elemental analysis with energy dispersive X-ray analysis (EDAX), dynamic light scattering (DLS), and transmission electron microscopy (TEM). Our analysis shows that the Jasada Bhasma particles are in oxygen deficient state and a clearly identifiable fraction of particles are in the nanometer size range. These properties like oxygen deficiency and nanosize particles in Jasada Bhasma might impart the therapeutic property of this particular type of medicine. A. C. Joshi: Private Practitioner (Vaidya).     

Trench-template fabrication of indium and silicon nanowires prepared by thermal evaporation process

In this study, we report on the trench-template assisted fabrication of nanowires for thermally evaporated indium and silicon thin films on quartz substrate. Length of the nanowires is completely dependent on the length of the trench, whereas the diameter of the nanowires is dependent on the thickness of the thin film. The diameter of nanowire increases from 200 nm to 1 μm when the thickness was increased from 15 to 60 nm. It is observed that nanowires diameter is invariably controlled by material deposition thickness. Average crystallite sizes for 60 nm indium and silicon deposition inside the trench are 120 and 35 nm, respectively. Nanowire surface plasmon peak shift as compared to the same thickness untemplated continuous thin film is more for thinner nanowires. This technique of nanowire fabrication is shown to be versatile in nature.     

Velocity and rotation measurements in acoustically levitated droplets

The velocity scale inside an acoustically levitated droplet depends on the levitator and liquid properties. Using Particle Imaging Velocimetry (PIV), detailed velocity measurements have been made in a levitated droplet of different diameters and viscosity. The maximum velocity and rotation are normalized using frequency and amplitude of acoustic levitator, and droplet viscosity. The non-dimensional data are fitted for micrometer- and millimeter-sized droplets levitated in different levitators for different viscosity fluids. It is also shown that the rotational speed of nanosilica droplets at an advanced stage of vaporization compares well with that predicted by exponentially fitted parameters.     

Ionic conductivity in hydrogels for contact lens applications

Biphasic hydrogel polymers are in the forefront of new extended wear contact lens development. In the biphasic hydrogel the objective is to produce co-continuous domains of siloxane units for high oxygen permeability, coupled with hydrophilic units forming aqueous channels for hydraulic and ion mobility. These are distributed in phase separated nano-scale regions such that the material is optically clear while achieving the required properties to maintain corneal health and lens movement. This paper describes how Impedance Spectroscopy permits a rapid measurement of ion conductivity in a range of silicone and non-silicone hydrogel materials with water contents ranging from 18% to 75% equilibrium water content. For non-silicone hydrogels relative sodium ion conductivity follows a typical percolation curve. However, for silicone hydrogels ion mobility is three orders of magnitude higher than conventional hydrogels of the same equilibrium water content. The influence of electrolyte concentration, interfacial electrode sample contact pressure and temperature are also reported. Paper presented at the Patras Conference on Solid State Ionics — Transport Properties, Patras, Greece, Sept. 14 – 18, 2004.     

An efficient algorithm for a job shop problem

We study the problem of minimizing makespan in a two-machine job shop with unit processing time operations. An efficient algorithm with respect to a succinct encoding of the problem instances is proposed. The algorithm is an improvement of earlier algorithms proposed for the problem by Brucker [1,2], Hefetz and Adiri [7], and Timkovskiy [15]. The idea behind the algorithm has the potential of extension to job shops with parallel machines.This research is supported in part by NSERC Grants A4619, OGP0105675, OGP0104900, General Motors of Canada, and the Manufacturing Research Corporation of Ontario.     

Meson spectroscopy with confined one gluon exchange potential

Confined gluons-exchange among relativistically confined quarks is used to calculate the ground state masses and the radially excited states of pseudo scalar and vector mesons. A good agreement is obtained with the experimental masses. The limitation of the perturbative treatment of estimating theN−Δ andπ−ρ splitting using one-gluon-exchange potential is pointed out.     

Coherence characteristics of light-emitting diodes

We report the measurement of coherence characteristics of light-emitting diodes (LEDs). Experiments were performed using red and green color LEDs directly illuminating the Young's double slit kept in the far-zone. Fourier transform fringe analysis technique was used for the measurement of the visibility of interference fringes from which the modulus of degree of spectral coherence was determined. Low degree of spectral coherence, typically 0.4 for red and 0.2 for green LED with double-slit separation of 400 μm was observed. A variable slit was then kept in front of the LEDs and the double slit was illuminated with the light coming out of the slit. Experiments were performed with various slit sizes and the visibility of the interference fringes was observed. It was found that visibility of the interference fringes changes drastically in presence of variable slit kept in front of LEDs and a high degree of spectral coherence, typically 0.85 for red and 0.8 for green LED with double-slit separation of 400 μm and rectangular slit opening of 500 μm was observed. The experimental results are compared with the theoretical counterparts. Coherence lengths of both the LEDs were also determined and it was obtained 5.8±2 and 24±4 μm for green and red LEDs, respectively.     

Glycerol effects on the formation and rheology of cubic phase and related gel emulsion

We have investigated the effects of glycerol on the formation and rheological behavior of cubic phase (I(1)) and related O/I(1) gel emulsion in a water/C(12)EO(8)/dodecane system at 25 degrees C. The phase behavior of the water/C(12)EO(8)/dodecane system was studied by optical observation and structures of different liquid crystalline phases were identified by small-angle X-ray scattering (SAXS) techniques. Addition of dodecane (2 wt%) to aqueous solutions of C(12)EO(8) in a concentrated region (40 wt%) leads to the formation of the I(1) phase (which was absent without the addition of oil). The I(1) phase solubilized some amount of oil and at higher oil concentrations the I(1)+O phase was formed, allowing the preparation of O/I(1) gel emulsion. Rheological measurements have shown that the complex viscosity, |eta( *)|, of the I(1) phase is tremendously high ( approximately 10(7) Pas) and it increases with increasing oil concentration, attains a maximum value near the phase boundary, and then decreases drastically in the I(1)+O region. The increasing |eta( *)| or decreasing tandelta(G(')/G(')) can be ascribed with the interactions among the neighboring micelles. The decreasing trend of the |eta( *)| in the I(1)+O region is simply due to the low volume fraction of the I(1) phase. It has been shown that glycerol decreases the viscosity of the I(1) phase and related gel emulsion, which is due to the I(1)-hexagonal phase (H(1)) microstructural transition. Digital images show the physical appearance of the emulsion, which depends on the glycerol concentration changes from translucent to transparent.     

Synthesis,Spectral, and Structural Characterization of Bisthiocarbohydrazone Derivatives

Abstract

Bisthiocarbohydrazone derivatives of three heterocyclic ketone ligands, having a flexible coordination ability; 1, 5-bis (2-acetylthiophene) thiocarbohydrazone; 1, 5-bis (2-acetylfuran) thiocarbohydrazone; and 1, 5-bis (2-acetylpyrrole) thiocarbohydrazone were synthesized and characterized by elemental analysis, UV-visible, FT-IR, cyclic voltammetry, and ¹H and ¹³C-NMR spectral studies. All bisthiocarbohydrazone exhibited the thioketone—thioenol tautomeric forms, as evidenced by IR spectral data and single crystal X-ray diffraction studies of 1, 5-bis (2-acetylfuran) thiocarbohydrazone and 1, 5–bis (2-acetylpyrrole) thiocarbohydrazone.

Supplementary materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfer, and Silicon and the Related Elements for the following free supplemental files: Additional figures and tables.     

Synthesis and spectroscopic studies of complexes of zinc(II) with N2O2 donor groups

Complexes of zinc(II) with N,N'-disalicylidene-1,2-phenylenediamine (H2dsp), N,N'-disalicylidene-3,4-diaminotoluene (H2dst), 4-nitro-N,N'-disalicylidene-1,2-phenylenediamine (H2ndsp) and N,N'-disalicylidene ethylenediamine (H2salen) have been prepared and characterized by elemental analysis, electronic, IR, 1H NMR and thermal studies. TG studies show that all complexes decomposed in one step. Kinetic and thermodynamic parameters were computed from the thermal decomposition data. The activation energy of complexes lies 60-87 kJ mol(-1) range.