On the photometric determination of trivalent rhodium with eriochromecyanine RC

Summary Eriochromecyanine RC has been used as chromogenic reagent for the photometric determination of rhodium(III) on a micro scale. A coloured Rh(III)-ECRC chelate with _max 530 nm at pH 4.0 (25°C) is formed. A detailed study has been made concerning to characteristics, composition and stability of the chelate. Standard deviation was ±1.17%.

---

Über die photometrische Bestimmung von dreiwertigem Rhodium mit Eriochromcyanin RC

Zusammenfassung Ergebnisse einer Untersuchung über die Zusammensetzung und Stabilität des Komplexes werden mitgeteilt. Das Absorptionsmaximum liegt bei 530 nm (pH 4,0; 25°C). Bestimmungen konnten mit einer Standardabweichung von ±1,17% durchgeführt werden.

     

Polymer-coated hollow-fiber microextraction of estrogens in water samples with analysis by gas chromatography-mass spectrometry

A novel sorbent, dihydroxylated polymethylmethacrylate (DHPMM), coated on hollow-fiber membrane, is used for the polymer-coated hollow-fiber microextraction of trace amounts of natural and synthetic estrogens, such as diethylstilbestrol, estrone, 17beta-estradiol and 17alpha-ethynylestradiol, in aqueous samples. In this procedure, estrogens were extracted using the functionalized polar DHPMM polymer with derivatization using N-methyl-N-(trimethylsilyl)trifluoroacetamide followed by gas chromatography-mass spectrometric analysis. The detection limits for estrogens in aqueous sample were between 0.03 and 0.8 ng l(-1) and the calibration curves were linear over the concentration range 0.05-10 microgl(-1) and had correlation coefficients of >0.994. The relative standard deviations (RSDs) were <15% (n = 3). This simple, accurate, sensitive and selective analytical method is applicable to the determination of trace amounts of estrogens in reservoir and potable water samples.     

Oxidative transformation of ciprofloxacin by alkaline permanganate – A kinetic and mechanistic study

This spectroscopic study presents the kinetics and degradation pathways of oxidation of ciprofloxacin by permanganate in alkaline medium at constant ionic strength of 0.04 mol⁻³. Orders with respect to substrate, oxidant and alkali concentrations were determined. Effect of ionic strength and solvent polarity of the medium on the rate of the reaction was studied. The oxidation products were identified by LC-ESI-MS technique. Product characterization of ciprofloxacin reaction mixtures indicates the formation of three major products corresponding to m/z 263, 306, and 348 (corresponding to full or partial dealkylation of the piperazine ring). The piperazine moiety of ciprofloxacin is the predominant oxidative site to KMnO₄. Product analyses showed that oxidation by permanganate results in dealkylation at the piperazine moiety of ciprofloxacin, with the quinolone ring essentially intact. The reaction kinetics and product characterization point to a reaction mechanism that likely begins with formation of a complex between ciprofloxacin and the KMnO₄, followed by oxidation at the aromatic N1 atom of piperazine moiety to generate an anilinyl radical intermediate. The radical intermediates subsequently undergo N-dealkylation. Investigations of the reaction at different temperatures allowed the determination of the activation parameters with respect to the slow step of proposed mechanism. The proposed mechanism and the derived rate laws are consistent with the observed kinetics.     

Semiclassical statistical mechanics of two-dimensional hard-body fluids

The problem of calculating the thermodynamic properties of two-dimensional semiclassical hard-body fluids is studied. Explicit expressions are given for the first-order quantum corrections to the free energy, equation of state, and virial coefficients. The numerical results are calculated for the planar hard dumbbell fluid. Significant features are the increase in quantum corrections with increasing eta and increasing L*=L/sigma(0).     

Control of olefin geometry in the bryostatin B-ring through exploitation of a C(2)-symmetry breaking tactic and a Smith-Tietze coupling reaction

A completely stereocontrolled asymmetric synthesis of an advanced B-ring synthon for the bryostatin family of antitumor agents is reported. Noteworthy features of our synthesis include the Smith-Tietze bis-alkylation reaction between 12 and 13 en route to C(2)-symmetrical ketone 10 and the totally stereoselective conversion of 10 into triol 18 via a Grignard addition tactic. Triol 18 was converted to epoxide 3 in nine steps, and an acid-catalyzed intramolecular Williamson etherification reaction completed the synthesis of 2.     

Facile reduction of aromatic nitro/azido functionality on solid support employing Al/NiCl2·6H2O and Al/NH4Cl: synthesis of pyrrolo[2,1-c][1,4]benzodiazepines

An efficient and mild method for the reduction of aromatic nitro and azido groups on solid support using Al/NiCl₂·6H₂O and Al/NH₄Cl is described. This solid phase reduction technique has been applied towards the synthesis of DNA binding pyrrolo[2,1-c][1,4]benzodiazepine antitumour antibiotics.     

Spectrophotometric determination of palladium(II) with 2-diethylaminoethanethiol hydrochloride and the simultaneous determination of rhodium and palladium

2-Diethylaminoethanethiol hydrochloride is proposed for spectrophotometric determination of palladium(II). The sensitivity of the reaction is 0.0085 smg/cm² and the yellow colored complex shows absorption maxima at 258 mμ and 303 mμ. Color development is slow in the cold but complete after heating for 10–15 min. The optimum pH range is 3.5 to 5.5 and the system adheres to Beer's law between 0.2 and 16.8 p.p.m. of palladium. The average and maximum relative standard deviations were 0.60% and 1.40% respectively. Interferences due to other platinum metals were studied and a procedure is suggested for the simultaneous determination of rhodium and palladium.     

Study of hexane adsorption in nanoporous MCM-41 silica

We study here the adsorption of hexane on nanoporous MCM-41 silica at 303,313, and 323 K, for various pore diameters between 2.40 and 4.24 nm. Adsorption equilibria, measured thermogravimetrically, show that all the isotherms, that are somewhat akin to those of type V, exhibit remarkably sharp capillary adsorption phase transition steps and are reversible. The position of the phase transition step gradually shifts from low to high relative pressure with an increase in the temperature as well as the pore sizes. The isosteric heats of adsorption derived from the equilibrium information using the Clapeyron equation reveal a gradual decrease with increasing adsorbed amount because of the surface heterogeneity but approach a constant value near the phase transition. A decrease in the pore size results in an increase in the isosteric heat of adsorption because of the increased dispersion forces. A simple strategy, based on the Broekhoff and De Boer adsorption theory, successfully interprets the hexane adsorption isotherms for the different pore size MCM-41 samples. The parameters of an empirical expression, used to represent the potential of interaction between the adsorbate and adsorbent, are obtained by fitting the monolayer region prior to capillary condensation and the experimental phase transition simultaneously, for some pore sizes. Subsequently, the parameters are used to predict the adsorption isotherm on other pore size samples, which showed good agreement with experimental data.     

A new kinetic model for bulk polymerization of vinyl chloride based on two-phase hypothesis

A kinetic model has been developed for the bulk polymerization of vinyl chloride using Talamini's hypothesis of two-phase polymerization and a new concept of kinetic solubility which assumes that rapidly growing polymer chains have considerably greater solubility than the thermodynamic solubility of preformed polymer molecules of the same size and so can remain in solution even under thermodynamically unfavourable conditions. It is further assumed that this kinetic solubility is a function of chain length. The model yields a rate expression consistent with the experimental data for vinyl chloride bulk polymerization and moreover is able to explain several characteristic kinetic features of this system. Application of the model rate expression to the available rate data has yielded 2.36 × 10⁸l mol^?1 sec^?1 for the termination rate constant in the polymer-rich phase; as expected, this value is smaller than that reported for homogenous polymerization by a factor of 10–30.