Fe3O4 – Glutathione stabilized Ag nanoparticles: A new magnetically separable robust and facile catalyst for aqueous phase reduction of nitroarenes

The heterostructured Ag nanoparticles decorated Fe₃O₄ Glutathione (Fe₃O₄‐Glu‐Ag) nanoparticles (NPs) were synthesized by sonicating glutathione (Glu) with magnetite and further surface immobilization of silver NPs on it. The ensuing magnetic nano catalyst is well characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), powder X‐ray diffraction (PXRD), thermogravimetric analysis (TGA). The prepared Fe₃O₄‐Glu‐Ag nanoparticles have proved to be an efficient and recyclable nanocatalyst with low catalyst loading for the reduction of nitroarenes and heteronitroarenes to respective amines in the presence of NaBH₄ using water as a green solvent which could be easily separated at the end of a reaction using an external magnet and can be recycled up to 5 runs without any significant loss in catalytic activity. Gram scale study for the reduction of 4‐NP has also being carried out successfully and it has been observed that this method can serve as an efficient protocol for reduction of nitroarenes on industrial level.     

Thermoanalytical studies of oxovanadium(IV)hydroxamate complexes

The thermal decomposition behavior of oxovanadium(IV)hydroxamate complexes of composition [VO(acac)(C₆H₅C(O)NHO)] (I), [VO(C₆H₅C(O)NHO)₂] (II), [VO(acac)(4-ClC₆H₄C(O)NHO)] (III), [VO(4-ClC₆H₄C(O)NHO)₂] (IV) (where acac = (CH₃COCHCOCH₃ ^–) synthesized from the reactions of VO(acac)₂ with equi- and bimolar amounts of potassium benzohydroxamate and potassium 4-chlorobenzohydroxamate in THF + MeOH solvent medium has been studied by TG and DTA techniques. TG curves indicated that complexes I, II, and IV undergo decomposition in single step to yield VO₂ as the final residue, while complex III decomposes in two steps to yield VO(acac) as the likely intermediate and VO₂ as the ultimate product of decomposition. The formation of VO₂ has been authenticated by IR and XRD studies. From the initial decomposition temperatures, the order of thermal stability for the complexes has been inferred as IV > I > III > II.     

Redox Behavior of Neptunium(V) in Tributyl Phosphate and <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-Dihexyl Octanamide Extractants Dissolved in <Emphasis Type="Italic">n</Emphasis>-Dodecane

Spectrophotometric investigations have been carried out on the disproportionation of Np(V) to form Np(IV) and Np(VI) in 1.1 mol⋅L⁻¹ solutions of tributyl phosphate (TBP) and in N,N-dihexyl octanamide (DHOA) in n-dodecane medium. The Np(V) was found to coordinate with Np(IV) in 1.1 mol⋅L⁻¹ TBP solution in n-dodecane to form a mixed valence “cation–cation” complex by bonding through an axial oxo group on Np(V). By contrast, this interaction was less prominent in the case of 1.1 mol⋅L⁻¹ DHOA solutions. The effect of 1-octanol, added as phase modifier, on the disproportionation behavior of Np(V) was also investigated. An attempt was made to calculate the disproportionation/reduction rate constants for Np(V) under the conditions of these studies. Absorbance measurements on the Np stripped from organic phases revealed the occurrence of Np(V) in the aqueous phase.     

Soot deep oxidation catalyzed by molybdena and molybdates: a thermogravimetric investigation

Molybdena (MoO₃) and molybdates of bismuth (Bi₂Mo₃O₁₂), chromium (Cr₂Mo₃O₁₂), barium (BaMoO₄), manganese (MnMoO₄) and copper (Cu₃Mo₂O₉) were synthesized and characterized by X-ray powder diffractometry and infrared spectroscopy. They were then assessed as ‘loose contact' catalysts for soot deep oxidation (combustion) in air by thermogravimetry. A similar assessment was carried out on commercial chromia (Cr₂O₃) and tungsta (WO₃). Observed high oxidation activity of MoO₃, as compared to both Cr₂O₃ and WO₃, is attributed to the higher volatility (mobility) of MoO_x species. On similar grounds, observed high activity of MoO₃ and Cu₃Mo₂O₉, as compared to the other test molybdates, is explained. Relatively speaking, however, a higher activity was observed for Cu₃Mo₂O₉ than MoO₃, whereby soot ignition temperature decreased from 571°C (uncatalyzed oxidation) to 430°C, to occur within the temperature range of diesel exhaust (200–450°C). This observation is ascribed to copper-promoted redox conduct of Mo(VI) in the oxidation reaction of soot. Kinetics of the reaction was studied non-isothermally, and the kinetic parameters (A, k, ΔE and the reaction order) were calculated.     

Standard molar Gibbs free energy of formation of Pb5CrO8(s), Pb2CrO5(s), and PbCrO4(s)

Standard molar Gibbs free energy of formation of ternary oxides Pb₅CrO₈(s), Pb₂CrO₅(s), and PbCrO₄(s) were determined by measuring equilibrium oxygen partial pressures over relevant phase fields using manometry and solid oxide electrolyte based emf methods and are given by: ${\mathrm{\Delta }}_f{G}_m^{°}{\text{Pb}}_5{\text{CrO}}_8(s)\pm 0.55/(\text{kJ}·{\text{mol}}^{-1})=-1809.4+0.6845(T/\text{K})(837\le T/\text{K}\le 1008)\text{,}$${\mathrm{\Delta }}_f{G}_m^{°}{\text{Pb}}_2{\text{CrO}}_5(\text{s})\pm 0.30/(\text{kJ}·{\text{mol}}^{-1})=-1161.3+0.4059(T/\text{K})(859\le T/\text{K}\le 1021)\text{,}$${\mathrm{\Delta }}_{\text{f}}{G}_m^{°}{\text{PbCrO}}_4(\text{s})\pm 0.17/(\text{kJ}·{\text{mol}}^{-1})=-909.8+0.3111(T/\text{K})(863\le T/\text{K}\le 1093)\text{,}$     

Nanofibrous polyaniline thin film prepared by plasma‐induced polymerization technique for detection of NO2 gas

A nanofibrous polyaniline (PANI) thin film was fabricated using plasma‐induced polymerization method and explored its application in the fabrication of NO₂ gas sensor. The effects of substrate position, pressure, and the number of plasma pulses on the PANI film growth rate were monitored and an optimum condition for the PANI thin film preparation was established. The resulting PANI film was characterized with UV–visible spectrophotometer, FTIR, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The PANI thin film possessed nanofibers with a diameter ranging from 15 to 20 nm. The NO₂ gas sensing behavior was studied by measuring the change in electrical conductivity of PANI film with respect to NO₂ gas concentration and exposure time. The optimized sensor exhibited a sensitivity factor of 206 with a response time of 23 sec. The NO₂ gas sensor using nanofibrous PANI thin film as sensing probe showed a linear current response to the NO₂ gas concentration in the range of 10–100 ppm. Copyright © 2009 John Wiley & Sons, Ltd.     

Solid-state synthesis, structural variants and transformation of three-dimensional sulfides, AGaSnS4 (A=Na, K, Rb, Cs, Tl) and Na1.263Ga1.263Sn0.737S4

New cubic-AGaSnS₄ (A=Na, K, Rb, Cs, Tl) and orthorhombic-NaGaSnS₄ compounds were synthesized by solid-state reactions and characterized by X-ray diffraction and diffuse reflectance spectroscopy. Single crystals of orthorhombic-Na_1.263Ga_1.263Sn_0.737S₄ were obtained in the crystal growth attempts of sodium compound. All six new compounds have orthorhombic AgGaGeS₄ and cubic BaGa₂S₄ structures, as determined from single crystal X-ray structures of Na_1.263Ga_1.263Sn_0.737S₄ and cubic-AGaSnS₄ (A=Na, K, Rb). Orthorhombic-NaGaSnS₄ and known layered-KGaSnS₄ undergo structural transformation to thermodynamically stable cubic form.     

Chiral discrimination of D- and L-amino acids using iodinated tyrosines as chiral references: Effect of iodine substituent

L-Tyrosine and iodinated L-tyrosines, i.e., 3-iodo-L-tyrosine and 3,5-diiodo-L-tyrosine, are successfully used as chiral references for the chiral discrimination of aliphatic, acidic, and aromatic amino acids. Chiral discrimination is achieved by investigating the collision-induced dissociation spectra of the trimeric complex [Cu(II)(ref)(2)(A) - H](+) ion generated by electro spraying the mixture of D- or L-analyte amino acid (A), chiral reference ligand (ref) and M(II)Cl(2) (M = Ni and Cu). The relative abundances of fragment ions resulted by the competitive loss of reference and analyte amino acids are considered for measuring the degree of chiral discrimination by applying the kinetic method. The chiral discrimination ability increases as the number of iodine atom increases on the aromatic ring of the reference and the discrimination is better with Cu when compared with Ni. A large chiral discrimination is obtained for aliphatic and aromatic amino acids using iodinated L-tyrosine as the reference. Computational studies on the different stabilities of the diastereomeric complexes also support the observed differences measured by the kinetic method. The suitability of the method in the measurement of enantiomeric excess over the range of 2% to 100% ee with relative error 0.28% to 1.6% is also demonstrated.     

Insecticidal activity of a novel fatty acid amide derivative from Streptomyces species against Helicoverpa armigera

Helicoverpa armigera, an important pest causes serious damage to grain legumes. The main objective of this study was to isolate and identify the metabolite against H. armigera from a previously characterised Streptomyces sp. CAI-155. The culture filtrate of CAI-155 was extracted using Diaion HP-20 and the active fractions were fractionated on Silica and C18 column chromatography. The C18 active fraction was further fractionated on Silica gel 60 F₂₅₄ thin layer chromatography (TLC). The most active fraction (Rf 0.64) purified from TLC led to the identification of a novel metabolite N-(1-(2,2-dimethyl-5-undecyl-1,3-dioxolan-4-yl)-2-hydroxyethyl)stearamide by spectral studies. The purified metabolite showed 70–78% mortality in 2nd instar H. armigera by diet impregnation assay, detached leaf assay and greenhouse assay. The LD₅₀ and LD₉₀ values of the purified metabolite were 627 and 2276 ppm, respectively. Hence, this novel metabolite can be exploited for pest management in future.     

Antimicrobial Surgical Sutures: Recent Developments and Strategies

Surgical sutures are probably the most widely used medical devices in healthcare applications for wound closure. During their application, sutures may be exposed to microorganisms present in the environment leading to bacterial biofilm formation, and thereon to surgical site infections. The physicochemical characteristics of the polymeric substrate play a major role in directing the behavior of the suture in a biological milieu. In such a context, it is necessary to develop sutures which actively repel and inhibit bacterial adherence and colonization on their surfaces. Drug eluting sutures have been proposed as a solution to this dilemma. Currently, bioactive agents (natural or synthetic) are being incorporated in polymeric materials via various methods including blending and compounding, surface functionalization and conjugation, and coating to render antimicrobial surgical sutures. However, each of these methods has its own pros and cons. Depending upon the nature of the substrate, an appropriate processing technique has to be chosen. In this article, we review the recent state-of-the-art developments and strategies in antimicrobial surgical suture fabrication. The efficacy and mechanism of these sutures in controlling infection is critically analyzed. However, such bioactive agent incorporated sutures have to be tested in clinically randomized trials to accurately gauze their applicability in a surgical setting. Presently, very few antimicrobial surgical sutures are available commercially. Therefore, there is a great scope for market development in this area.