Sol-Emulsion-Gel Synthesis of Shaped Powders in the System BaO-TiO2

Shaped tetragonal barium titanate (BaTiO₃) particles were prepared by the sol-emulsion-gel method with systematic variation of the concentration of a non-ionic surfactant in the organic phase (oil phase) of water-in-oil (w/o) emulsions above or below the critical micelle concentration (CMC). An acetate-based sol with equivalent oxide ratio BaO : TiO₂ = 1 : 1 was selected for the study. Micelle formation of the surfactant and their self-aggregation apparently played an important role in controlling the shape and size of the droplets and accordingly shape and size of the final barium titanate particles resulting therefrom. Transmission electron microscopy (TEM) revealed that with low concentration of the surfactant (2–5 vol%) ill-formed spheres were obtained. Spherical particles were formed with increasing the surfactant concentration to 7 vol%. At 12 vol% of the surfactant, rod-like particles were first found to form, which with further increase in surfactant concentration to 15–20 vol%, gradually transformed to cube-like/lamellar type particles. Attempts have been made to explain the various particle shapes in terms of surfactant aggregation.     

Reaction of cis-Ru(bpy)2Cl2 with 1-phenyl 5-(aminophenyl) 9-(2-pyridyl) benzimidazole derivatives: crystal structures of N-(4-chlorophenyl) imidazo[1,5a] pyridine and cis-[Ru(bpy)2(MeCN)2](ClO4)2

Reaction of 1-phenyl 5-(aminophenyl) 9-(2-pyridyl) benzimidazole derivatives (2) with cis-Ru(bpy)₂Cl₂ in MeCN results in the formation of N-(aryl) imidazo[1,5a] pyridine derivatives (4) and cis-[Ru(bpy)₂(MeCN)₂]²⁺ (5). Crystal structures of N-(4-chlorophenyl) imidazo[1,5a] pyridine (4b) and cis-[Ru(bpy)₂(MeCN)₂](ClO₄)₂ (5) are also reported.     

Phase behavior and surface tensions of amphiphilic fluorinated random copolymer aqueous solutions

Phase behavior and surface tension of aqueous solutions of fluorinated random copolymers [perfluoroalkylacrylate]–[poly(ethyleneoxide)methacrylate], [C_mRf-acrylate]-[EO_n-methacrylate] with fluroalkyl carbon number m = 8, 6, 4, 2 and number of ethyleneoxide unit, n = 9 and 4.5 were investigated as a function of composition and different combinations of m and n. Isotropic solutions are formed at lower temperatures over wide concentration range of copolymer but at higher temperature phase separation occurs. The cloud point of copolymer decreases with decreasing n as well as m, and also with decreasing the number of poly(ethyleneoxide)methacrylate chain per perfluorinatedalkylacrylate chain, suggesting that the copolymers become more hydrophobic on decreasing m and n. Equilibrium and dynamic surface tension measurements show that copolymers become increasingly surface active as m as well as n decrease but the adsorption at the air–water interface is very slow due to bulkiness of the molecules. No clear evidence of the formation of micellar aggregates could be obtained from surface tension–composition curves.     

Mullite Fibre Mats by a Sol-Gel Spinning Technique

Fine grained, microcrystalline mullite (Al_4+2x Si_2–2x O_10–x) fibre mats with a web-like structure were fabricated by a sol-gel spinning technique using a multi-orifice spinneret. Points of contact in gel fibre mats helped in the formation of a web-like fibrous body having reasonable strength and very little dust formation after calcination. Strong and resilient fibres with diameters in the range 3–12 m were obtained by a single-step sol-gel method from spinnable sols devoid of organics as the binder aid. Crystallization of -alumina and mullite at about 900°C and 1250°C, respectively was confirmed by differential thermal analysis (DTA) and X-ray diffraction (XRD). Thermogravimetry (TG) indicated the removal of most of the volatiles at about 500°C accompanied by a weight loss of about 48%. Scanning electron microscopy (SEM) shows the presence of small grains (80–150 nm in size) in the fibres calcined at 1250°C. Fourier transformed infrared spectroscopy (FTIR) indicated the sequence of transformations taking place during heat-treatment of gel fibres at different temperatures. The individual fibres in the mats calcined at 1250°C exhibited a tensile strength of 1300–1600 MPa.     

Iron chelation properties of an extracellular siderophore exochelin MS

The coordination chemistry of an extracellular siderophore produced by Mycobacterium smegmatis, exochelin MS (ExoMS), is reported along with its pK(a) values, Fe(III) and Fe(II) chelation constants, and aqueous solution speciation as determined by spectrophotometric and potentiometric titrations. Exochelin MS has three hydroxamic acid groups for Fe(III) chelation and has four additional acidic protons from a carboxylic acid group and three primary amine groups, on the backbone of the molecule. The pK(a) values for the three hydroxamic acid moieties, the carboxylic acid group and the alkylammonium groups on ExoMS, correspond well with the literature values for these moieties. Equilibrium constants for proton-dependent Fe(III)-ExoMS equilibria were determined using a model involving the sequential protonation of the Fe(III)-ExoMS complexes at the first and second coordination shells. The equilibrium constants (beta) for the overall formation of Fe(III)ExoMS(H(3))(2+) and Fe(II)ExoMS(H(3))(+) from Fe((aq))(3+) or Fe((aq))(2+) and the deprotonated hydroxamate coordinating group form of the siderophore, ExoMS(H(3))(-), are calculated as log beta(III) = 28.9 and log beta(II) = 10.1. A calculated pFe value of 25.0 is very similar to that of other linear trihydroxamic acid siderophores, and indicates that ExoMS is thermodynamically capable of removing Fe(III) from transferrin. The E(1/2) for the Fe(III)-ExoMS/Fe(II)-ExoMS couple was determined from quasi reversible cyclic voltammograms at pH = 6.5 and found to be -380 mV.     

Anomalies in quantitative measurement of 40K in natural samples

Journal of Radioanalytical and Nuclear Chemistry - Efficiency calibration by standard materials of known activity is usual protocol for γ-ray spectrometry. In general, 40K activity is measured...     

Selective N-monoalkylation of anilines catalyzed by a cationic ruthenium(II) compound

[(PPh₃)₂Ru(CH₃CN)₃Cl][BPh₄] has been found to catalyze the selective monoalkylation of anilines by alcohols.     

Concentration Dependent Transformation of Oligopeptide based Nanovesicles to Nanotubes and an Application of Nanovesicles

The concentration dependent transformation of an oligopeptide nanostructure from nanovesicles to nanotubes at neutral pH is presented. The oligopeptide Acp‐Tyr‐Glu (Acp: 6‐aminohexanoic acid) forms nanovesicles at a concentration of 6.9 mg mL^?1. At a concentration of 2.3 mg mL^?1 these vesicular structures completely disappear and nanotubular structures are observed. We have also successfully optimized an intermediate concentration (3.4 mg mL^?1) where an ordered array of fused vesicular structures are formed, which actually leads to the transition from nanovesicles to nanotubes. These vesicular structures are very much sensitive toward metal ions and pH. Biocompatible calcium ions and high pH (10.7) can trigger the rupturing of these nanovesicles. One important property of these nanovesicular structures is the encapsulation of a potent anticancer drug doxorubicin, which can also be released in the presence of calcium ions promising a future use of these nanovesicles as vehicles for carrying biologically important molecules.