Creatinine sensor based on a molecularly imprinted polymer-modified hanging mercury drop electrode

Molecularly imprinted polymers (MIP) have been elucidated to work as artificial receptors. In our present study, a MIP was applied as a molecular recognition element to a chemical sensor. We have constructed a creatinine sensor based on a MIP layer selective for creatinine and its differential pulse, cathodic stripping voltammetric detection (DPCSV) on a hanging mercury drop electrode (HMDE). The creatinine sensor was fabricated by the drop coating of dimethylformamide (DMF) solution of a creatinine-imprinted polymer onto the surface of HMDE. The modified-HMDE, preanodised in neutral medium at +0.4 V versus Ag/AgCl for 120 s, exhibited a marked enhancement in DPCSV current in comparison to the less anodised (≤+0.3 V) HMDE. The creatinine was preconcentrated and instantaneously oxidised in MIP layer giving DPCSV response in the concentration range of 0.0025-84.0 μg mL⁻¹ [detection limit (3σ) 1.49 ng mL⁻¹]. The sensor was found to be highly selective for creatinine without any response of interferents viz., NaCl, urea, creatine, glucose, phenylalanine, tyrosine, histidine and cytosine. The non-imprinted polymer-modified electrode did not show linear response to creatinine. The imprinting factor as high as 9.4 implies that the imprinted polymer exclusively acts as a recognition element of creatinine sensor. The proposed procedure can be used to determine creatinine in human blood serum without any preliminary treatment of the sample in an accurate, rapid and simple way.     

Effect of annealing temperature on the electrical properties of Au/Ta2O5/n-GaN metal–insulator–semiconductor (MIS) structure

We report on the effect of an annealing temperature on the electrical properties of Au/Ta₂O₅/n-GaN metal–insulator–semiconductor (MIS) structure by current–voltage (I–V) and capacitance–voltage (C–V) measurements. The measured Schottky barrier height (Φ _bo) and ideality factor n values of the as-deposited Au/Ta₂O₅/n-GaN MIS structure are 0.93 eV (I–V) and 1.19. The barrier height (BH) increases to 1.03 eV and ideality factor decreases to 1.13 upon annealing at 500 ^°C for 1 min under nitrogen ambient. When the contact is annealed at 600 ^°C, the barrier height decreases and the ideality factor increases to 0.99 eV and 1.15. The barrier heights obtained from the C–V measurements are higher than those obtained from I–V measurements, and this indicates the existence of spatial inhomogeneity at the interface. Cheung’s functions are also used to calculate the barrier height (Φ _bo), ideality factor (n), and series resistance (R _s ) of the Au/Ta₂O₅/n-GaN MIS structure. Investigations reveal that the Schottky emission is the dominant mechanism and the Poole–Frenkel emission occurs only in the high voltage region. The energy distribution of interface states is determined from the forward bias I–V characteristics by taking into account the bias dependence of the effective barrier height. It is observed that the density value of interface states for the annealed samples with interfacial layer is lower than that of the density value of interface states of the as-deposited sample.     

Buffers for the Physiological pH Range: Studies of 4-(N-Morpholino)butanesulfonic Acid (MOBS) from 5 to 55 °C

In this study, we report the pH values of two buffer solutions without chloride ion and eight buffer solutions with NaCl with an ionic strength I=0.16 mol?kg^?1. Electromotive force (emf) techniques have been used to get the cell potentials at 12 temperatures from 5 to 55?°C, including 37?°C. An extended form of the Bates-Guggenheim convention is used in the entire ionic strength range, 0.04 to 0.16?mol?kg^?1. The residual liquid junction potentials (??E _j ) of the buffer solutions of MOBS have been estimated from previous measurements with a flowing junction cell. These values of ??E _j have been used for correction in order to ascertain the operational pH values of four buffer solutions of MOBS at 25 and 37?°C. These solutions are recommended as pH standards for physiological application in the pH range 7.4 to 7.7.     

Iodine-catalyzed three-component one-pot synthesis of naphthopyranopyrimidines under solvent-free conditions

Iodine is found to be a highly efficient catalyst for the three-component coupling (3CC) of aldehydes, β-naphthol, and 1,3-dimethylbarbituric acid under solvent-free conditions to afford the corresponding 8,10-dimethyl-12-aryl-12H-naphtho[1′,2′5,6]pyrano[2,3-d]pyrimidine-9,11-diones in good yields with high selectivity. The use of readily available iodine makes this method very simple, convenient, and cost-effective.     

Studies on the thermal properties of silicone polymer based thermal protection systems for space applications

Journal of Thermal Analysis and Calorimetry - Thermal decomposition, thermal conductivity, specific heat and flammability of polydimethyl siloxane (PDMS) resin and three PDMS-based systems with...     

Antibacterial Activity of Alpinia galanga (L) Willd Crude Extracts

Methanol, acetone and diethyl ether extracts of Alpinia galanga have been evaluated against pathogens viz. Bacillus subtilis MTCC 2391, Enterobacter aerogene, Enterobacter cloacae, Enterococcus faecalis, Escherichia coli MTCC 1563, Klebsiella pneumoniae, Pseudomonas aeruginosa MTCC 6642, Salmonella typhimurium, Staphylococcus aureus and Streptococcus epidermis using Agar well diffusion method. Minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of all the extracts were determined using the macrodilution method. Methanol extracts have shown excellent activity towards all the pathogens with MIC and MBC values ranging from 0.04–1.28 mg/ml and 0.08–2.56 mg/ml, respectively. The GC–MS analysis of methanol extracts have yielded compounds like 5-hydroxymethyl furfural (59.9%), benzyl alcohol (57.6%), 1,8 cineole (15.65%), methylcinnamate (9.4%), 3-phenyl-2-butanone (8.5%) and 1,2 benzenedicarboxylic acid (8.9%), which could be responsible for its broad spectrum activity. So, A. galanga can be quite resourceful for the development of new generation drugs.     

Impedance spectroscopic studies of planetary ball-milled lithium titanium phosphate material

The ac electrical conductivity properties of LiTi₂(PO₄)₃ (LTP) polycrystalline material in two different crystallite sizes are compared. Micrometer sized LTP is prepared by conventional solid-state reaction. LTP crystallites of 71 nm size are prepared by solid-state reaction of 40 h planetary milled stoichiometric mixture. The XRD and SEM are used as characterization techniques. Electrical properties are studied using impedance spectroscopic technique. Ball-milled LTP shows one order increase in grain-interior conduction compared to microcrystalline LTP at 388 K. The increase in conduction results from decreased crystallite size.     

Analysis of refractometric fiber optic state-of-charge (SOC) monitoring sensor for lead acid battery

In situ monitoring of the state of charge (SOC) of lead acid battery is important to understand the residual electrical energy. Usage of battery reduces the charge content of the active electrolyte which in turn changes its refractive index. This paper reports refractometric fiber optic sensor developed for on-line monitoring of SOC. The SOC is monitored during discharging phases of the battery using the developed fiber optic sensor probe along with terminal voltage, temperature and depth of discharge using a LABVIEW based data acquisition system. The paper gives the working principle, design and construction details, results and calibration of the fiber optic sensor (FOS) probe. The in situ monitoring capability of the developed FOS is demonstrated in comparison with the contemporary off-line methods of specific gravity and terminal voltage measurements.