Crucial factors affecting the physicochemical properties of sol–gel produced Fe3O4@SiO2–NH2 core–shell nanomaterials

Multifunctional nanomaterials with task-specific physicochemical properties, especially core?Cshell nanostructures with Fe₃O₄ core and NH₂-functional shells (Fe₃O₄@SiO₂?CNH₂), have been extensively investigated as high-performance adsorbents, catalysts and catalyst supports; and in most cases the controllable sol?Cgel technique is the choice for fabrication of this kind of widely applied materials. Herein, we demonstrated that mono-dispersed and spherical Fe₃O₄@SiO₂?CNH₂ nanomaterials with magnetic response core, NH₂-functional shell structure can be facilely prepared by co-condensation of TEOS with APTMS using a versatile sol?Cgel process. It was shown that the proper usage of APTMS and appropriate pre-hydrolysis time of TEOS were crucial and key steps for formation of highly uniform and desirable amino loading Fe₃O₄@SiO₂?CNH₂ materials. The TEOS pre-hydrolysis and the critical time (around 90?min) before the addition of APTMS prove to be vital for uniform structure evolution, while the appropriate concentration of APTMS (~2.28?mmol?L^?1 in our system) leads to well-dispersed materials with relatively high loading of amino functionality. The as-prepared Fe₃O₄@SiO₂?CNH₂ magnetic nanoparticles prepared under optimum conditions possessing superparamagnetic behavior, uniform core?Cshell structure (~200?nm in diameter), relatively large BET surface area (~138?m²/g) and high incorporation of amino-functionality (~2.90?wt?%).     

A 2-dimensional gradual period photonic heterostructure possessing omnidirectional band gap in visible range made by holography

A 2-dimensional gradual period photonic heterostructure was made with holography by use of non-uniform swelling effect of dichromated gelatin during processing. In this structure, the symmetric point group of triangle lattice was debased to C_2V from C_6V. Theoretical analysis and experimental results show that omnidirectional band gap in visible range can be achieved with this kind of heterostructure made by low refractive index materials.     

Hydrolysis kinetics of silane coupling agents studied by near-infrared spectroscopy plus partial least squares model

Abstract

A method of Fourier transform near-infrared (FT-NIR) spectroscopy combined with partial least squares (PLS) model was successfully applied to investigate the hydrolysis kinetics of four kinds of silane coupling agents (phenyltriethoxysilane, vinyltriethoxysilane, 3-mercaptopropyltriethoxysilane, 3-chloropropyltriethoxysilane) in an acid-catalyzed EtOH system. The fast scanning speed and high sensitivity of the FT-NIR spectroscopy, and the powerful data processing ability of the PLS, enabled the method to quantitatively and accurately catch the fast changing H₂O concentration during the hydrolysis processes without delay, realizing the study of the fast-paced hydrolysis reactions of the silane coupling agents. The results showed that electrophilic substitution occurred in the hydrolysis reactions, which followed second-order reactions and greatly depend on the catalyst concentration and reaction temperature. The hydrolysis rate constants, activation energy, and Arrhenius Frequency factors were gained. In conclusion, the FT-NIR PLS model is a powerful tool for hydrolysis kinetics researching of the silane coupling agents.     

Study of Chiral Ionic Liquid as Stationary Phases for GC

Due to the synthetic flexibility and special enantioselectivity, chiral ionic liquids (CILs) have heightened interest and an increasing number of CILs has been designed and utilized. In this work, CIL named l-1-butyl-3-(2-propionic-1-ether) imidazolium bromide ([BAlaIM]Br) derived from natural amino acids was synthesized, with chiral center at cation moiety. Chiral stationary phases for gas chromatography were then prepared by mixing the CIL with polymeric ionic liquid ([PSOMIM][NTf₂], homemade) at different ratios (4:1, 2:1, and 1:1). The column efficiency was measured to be about 3,200 plates m^?1 (8 m × 0.25 mm i.d.) when the content of [BAlaIM]Br was 50 % (mass percent) in the mixed stationary phase. All columns were coated via the static coating method using 0.30 % (w/v) of stationary phases dissolved in methanol. The results showed that the CIL contributed to the selectivity of stationary phase toward positional isomers dichlorobenzenes, methylnaphthalenes and pinenes, etc. Meanwhile, [BAlaIM]Br showed better selectivity for enantiomers such as carvones, citronellals, limonenes and camphors. The interactions between chiral selector and enantiomers were also discussed.     

Zinc-Mediated Cyclodimerization of 1,5-Diaryl-1,4-pentadien-3-one in Aqueous Solution Under Ultrasound Irradiation

Synthesis of 2-cinnamoyl-1-styryl-3,4-diarylcyclopentanol via cyclodimerization of 1,5-diaryl-1,4-pentadien-3-one mediated by zinc was carried out in good yields at room temperature in NH₄Cl (aq.) and tetrahydrofuran under ultrasonic irradiation. In comparison with conventional methods, the main advantages of the present procedure are shorter reaction time and better yields.     

Electroless plating of copper on fly ash cenospheres using polyaniline‐Pd activation

The polyaniline of different intrinsic oxidation states, viz., the emeraldine (EM) and the leucoemeraldine (LM) states, were coated on 3‐aminopropyltriethoxy silane modified fly ash cenospheres. Without prior sensitization by SnCl₂ solution, Pd activation by PdCl₂ solution was carried out on EM and LM laden cenospheres, followed by electroless plating of copper (Cu). The topography and composition of the composites were characterized by scanning electron microscopy, X‐ray diffraction, and X‐ray photoelectron spectroscopy, etc. The results indicate that the oxidation state of the LM layer showed a much bigger increase than that of the EM layer in the Pd activation process, while coupled Pd reduction underwent to a more extent on the LM layer. The metallic Pd atoms on the LM and EM layers surface initiated the subsequent electroless plating of Cu, and the coated Cu on LM laden cenospheres had a much more uniform and compact morphology than that on EM laden cenospheres. Copyright © 2012 John Wiley & Sons, Ltd.     

Influence of Emulsifiers on Acrylate Latex Blends

The poly(methyl methacrylate/butyl acrylate/acrylic acid) [P(MMA/BA/AA)] and poly (styrene/butyl acrylate/acrylic acid) [P(St/BA/AA)] latexes were synthesized using the emulsifier octylphenol polyoxyethylene(10) ether (OP-10) and ammonium sulfate allyloxy nonylphenoxy poly(ethyleneoxy)(10) ether(DNS-86). The optimum amount of OP-10 and DNS-86 was 1.5% and 2.5% respectively. The P(MMA/BA/AA) and P(St/BA/AA) latex containing 1.5% OP-10 or 2.5% DNS-86 were blended pairwise. The performances of latex blends and parent latexes as a function of emulsifiers content in parent latexes were determined. The results indicated that the stability of latex blends is favorable, and particle size distribution was more uniform and thermal stability was improved after blending.     

Cascade synthesis of 3-aza-bicyclo[3.1.0]hex-2-ene derivatives from N-allyl enamines

An efficient iodine-mediated cascade synthesis of 3-aza-bicyclo[3.1.0]hex-2-ene derivatives from easily prepared N-allyl enamines has been developed. The advantages of the reaction include facilitative preparation of substrates 3a–t, good functional group tolerance and transition-metal-free conditions.     

Electrophile-driven copper-catalyzed one-pot synthesis of 3-halogen quinoline derivatives

A convenient and regioselective one-pot synthesis of 3-chloride or 3-bromide quinoline derivatives was achieved through a Grignard addition reaction by alkynyl Grignard regent to o-trifluoroacetyl aniline and a Cu(II)-catalyzed cyclization–halogenation tandem reaction with aqueous HCl or HBr as electrophilic reagent.