Thermodynamic Properties of Ternary Ionic Liquid Mixture Containing a Common Ion: Excess Molar Volumes,Excess Isentropic Compressibilities,Excess Molar Enthalpies and Excess Heat Capacities

In the present investigations, the excess molar volumes, \( V_{ijk}^{\text{E}} \), excess isentropic compressibilities, \( \left( {\kappa_{S}^{\text{E}} } \right)_{ijk} \), and excess heat capacities, \( \left( {C_{p}^{\text{E}} } \right)_{ijk} \), for ternary 1-butyl-2,3-dimethylimidazolium tetrafluoroborate (i) + 1-butyl-3-methylimidazolium tetrafluoroborate (j) + 1-ethyl-3-methylimidazolium tetrafluoroborate (k) mixture at (293.15, 298.15, 303.15 and 308.15) K and excess molar enthalpies, \( \left( {H^{\text{E}} } \right)_{ijk} \), of the same mixture at 298.15 K have been determined over entire composition range of x _i and x _j . Satisfactorily corrections for the excess properties \( V_{ijk}^{\text{E}} \), \( \left( {\kappa_{S}^{\text{E}} } \right)_{ijk} \), \( \left( {H^{\text{E}} } \right)_{ijk} \) and \( \left( {C_{p}^{\text{E}} } \right)_{ijk} \) have been obtained by fitting with the Redlich–Kister equation, and ternary adjustable parameters along with standard errors have also been estimated. The \( V_{ijk}^{\text{E}} \), \( \left( {\kappa_{S}^{\text{E}} } \right)_{ijk} \), \( \left( {H^{\text{E}} } \right)_{ijk} \) and \( \left( {C_{p}^{\text{E}} } \right)_{ijk} \) data have been further analyzed in terms of Graph Theory that deals with the topology of the molecules. It has also been observed that Graph Theory describes well \( V_{ijk}^{\text{E}} \), \( \left( {\kappa_{S}^{\text{E}} } \right)_{ijk} \), \( \left( {H^{\text{E}} } \right)_{ijk} \) and \( \left( {C_{p}^{\text{E}} } \right)_{ijk} \) values of the ternary mixture comprised of ionic liquids.     

Opportunities for Mercuric Ion Spectrophotometric Determination based on Reduction of Gold Nanoparticles Aggregation by N-containing Cyclic Molecules

Journal of Analytical Chemistry - Methods for the determination of mercury are described using gold nanoparticles functionalized with nitrogen containing cyclic molecules. Detection methods are...     

Isolation and characterization of 4-chlorophenol degrading bacterial strain from pharmaceutical xenobiotic compounds contaminated soil using enrichment technique

4- chlorophenol is available as the fundamental basic compound of numerous manufactured organics. It is produced from various sources like herbicides, wood additives, oil industries, pharmaceutical drugs and so on. It can be removed from the effluent by various ways but most effective method is bioremediation. In present study, aerobic bacterial strain was isolated from soil that was contaminated with pharmaceutical xenobiotic compounds using enrichment technique with 500 ppm of 4-chlorophenol as a sole source of carbon and energy. Colonies were isolated after 24 h of incubation on petri plate by media enrichment with 500 ppm of 4- chlorophenol and serial dilution method. 18 colonies were isolated and examined for their ability to degrade 500 ppm of 4-chlorophenol. The most potent strain, C17 was able to remove nearly ～99.93% of 4-chlorophenol in 24 h, 37 °C temperature and 6.8 pH. Based on morphological, biochemical, nucleotide homology and phylogenetic analysis the strain was found to have maximum similarity (98.98%) with Bacillus timonensis strain 10403023.     

Effect of density variation on the Sm A–I phase transition properties

Based on a thermodynamic model, we investigate how the density variation influences the smectic (Sm A)–isotropic (I) phase transition. We find that the density variation shifts the smectic A–isotropic transition temperature, however, first-order nature of the transition remains the same. Here, we also examine the effect of high pressure on the thermodynamic quantities. The present analysis shows that the pressure strongly influences the enthalpy and density step at the clearing transition. The pressure dependence of the thermodynamic properties is incorporated through the pressure dependent second Landau coefficient and the coefficients which couple the nematic and smectic order parameters to the density. We find a close agreement between theoretical and experimental results. Furthermore, we discuss the implications of the results for achiral liquid crystals.     

Study of gain dynamics and temporal jitter effects in copper vapor laser oscillator-amplifier chain

Effect of temporal jitter on the performance of copper vapor laser (CVL) master oscillator power amplifier (MOPA) chain using Monte-Carlo techniques was studied. The MOPA chain comprised an oscillator and five amplification stages. Amplification of CVL signal in each amplifier stage was modeled using rate equation based optical model. The effect of temporal jitter on the pulse energy stability in CVL MOPA chain was estimated for various jitter values. Our studies show that the pulse energy spread and the pulse energy instability increases with increase in jitter which in turn depends on the gain pulse width and the jitter considered. Pulse to pulse gain variation in CVL MOPA chain was studied along with temporal jitter. The acceptable tolerance limit on temporal jitter is ±4 ns for a pulse energy stability of 5% of CVL MOPA chain.     

Study of Optical Properties of <Emphasis Type="Italic">Macrophomina phaseolina</Emphasis> Impregnated Sol-gel Derived Silica Matrices

In the present frame of work, Macrophomina phaseolina is encapsulated in silica matrices at various concentrations by low temperature sol-gel technique using tetraethylorthosilicate (TEOS) as precursor. The optical and photophysical properties of these samples have been studied by second harmonics of Nd:YAG laser at 532 nm. UV-visible absorption spectra of samples have been recorded and it is found that the absorption increases with increase in concentration of fungus. Further, a decrease in output transmission intensity of the laser has been observed with increase in fungus concentration. The temporal response of these samples has also been examined. The results show that the fungus concentration can be measured within ∼15–20 min. This method of optical sensing of fungus in test sample is faster than other techniques, such as the conventional colorimetric method which takes about 1 h.     

Formation of linear polymers with pendant vinyl groups via inclusion complex mediated polymerization of divinyl monomers

Ethylene glycol dimethacrylate (EGDMA) and ethylene glycol methacrylate 4-vinyl benzoate (EGMAVB) were shown to form 1:1 inclusion complexes with cyclodextrin and were characterized by instrumental techniques. Computational analysis showed that the bent conformation of the included divinyl monomer was more stable than its linear conformation. Complexation of the divinyl monomer with the first CD molecule offered substantial stabilization than with the second CD molecule. The vinyl group included in the CD cavity did not participate in polymerization. As a result, solvent soluble, linear polymers with pendant vinyl unsaturation per repeat unit were obtained. This was unequivocally established by the polymerization of a complex comprising CD and EGMAVB. The unreacted vinyl group can be polymerized in the subsequent step to yield cross-linked products.     

Mechanical loads on a generalized thermoelastic medium with diffusion

The disturbance caused by the application of continuous mechanical source on the free surface of a homogeneous, isotropic elastic half space in the context of the theory of generalized thermoelastic diffusion with one relaxation time parameter is investigated in the Laplace-Fourier transform domain for a two dimensional problem using eigenvalue approach. The integral transforms are inverted by using a numerical technique. The expressions for displacement components, stresses, temperature field, concentration and chemical potential so obtained in the physical domain are computed numerically and illustrated graphically at different times, for copper like material. As a special case the effect of diffusion on various expressions has also been obtained analytically and depicted graphically.     

Ln0.5A0.5MnO3 (Ln=Lanthanide,A= Ca,Sr) Perovskites Exhibiting Remarkable Performance in the Thermochemical Generation of CO and H2 from CO2 and H2O

Perovskite oxides of the Ln_0.5A_0.5MnO₃ (Ln=lanthanide, A=Sr, Ca) family have been investigated for the thermochemical splitting of H₂O and CO₂ to produce H₂ and CO respectively. The amounts of O₂ and CO produced strongly depend on the size of the rare earth ions and alkaline earth ions. The manganite with the smallest rare earth possessing the highest distortion and size disorder as well as the smallest tolerance factor, gives out the maximum amount of O₂, and, hence, the maximum amount of CO. Thus, the best results are found with Y_0.5Sr_0.5MnO₃, which possesses the highest distortion and size disorder. Y_0.5Sr_0.5MnO₃ shows remarkable fuel production activity even at the reduction and oxidation temperatures as low as 1200 °C and 900 °C, respectively.