Performance improvement of PDMS/PES membrane by adding silicalite-1 nanoparticles: separation of xenon and krypton

The polydimethylsiloxane (PDMS) mixed matrix membrane with dispersed phase of nanozeolite silicalite-1 has been synthesized on polyethersulphone (PES) as a support, and its performance in the gas separation of xenon and krypton has been studied. For this purpose, nanozeolite silicalite-1 is synthesized by the hydrothermal clear solution method and is characterized by XRD and SEM analysis. In this research, the separation performance of MMM has also been compared with the polymeric PDMS membrane. Furthermore, the effect of feed pressure and loading percentage of nanozeolite in the polymeric matrix are evaluated. The results indicate that the addition of nanozeolite to the polymeric matrix improves its separation performance, and that the changes of the feed pressure have no major effect. The average permeability of the krypton and xenon gases through the PDMS polymeric membrane is calculated as 1.25 × 10^?9 and 1.78 × 10^?9 cm mol/(cm² s kPa), respectively, while by adding only 5 wt% of nanosilicalite-1 to the polymeric matrix of the membrane, this amount increased to 1.82 × 10^?9 and 8.07 × 10^?9 cm mol/(cm² s kPa), respectively. In addition, the presence of nanosilicalite-1 as the filler leads to an increase in the selectivity of xenon to krypton up to 4.38.     

Microemulsion high performance liquid chromatography method for the determination of ibuprofen in the presence of preservatives and impurities in oral pediatric suspension

A simple and rapid isocratic oil-in-water microemulsion HPLC method (MELC) has been developed for the analysis of ibuprofen in oral suspension formulation. The method was optimized for simultaneous separation and determination of Ibuprofen and its related compound C (Imp C), sodium benzoate, methylparaben, propylparaben and their related compound A (Imp A). The optimum conditions were achieved by testing several columns and mobile phase compositions, while the chromatographic parameters (retention time, plate number, tailing factor and resolution) were measured. The six compounds were successfully separated within a run time of 14 min, using Eurospher II C18 (150 mm × 4.6 mm i.d., 5 µm) at ambient temperature, a mobile phase made of 5.0 g SDS, 6.6 g butan-1-ol, 0.8 g n-heptane in 100 mL of 0.05% TFA. Flow rate was fixed to 1 mL min^?1 and wavelength detection to 254 nm. The same phase was used in UHPLC and monolithic columns. A rapid comparison of system suitability between the three methods was made. The HPLC method was validated following ICH guidelines in terms of selectivity, linearity, accuracy and precision. The developed method was successfully applied to a commercial pharmaceutical formulation which shows that it can be used for routine analysis.     

Synthesis and in vitro antibacterial evaluation of 6-substituted 4-amino-pyrazolo[3,4-<Emphasis Type="Italic">d</Emphasis>]pyrimidines

Pyrazolo[3,4-d]pyrimidines are one of the most important classes of fused heterocyclic compounds which exhibit a broad range of biological and medicinal properties. They are known as anticancer, antifungal, antibacterial, antiviral and anti-inflammatory agents. In this study, some new 6-substituted 4-amino-pyrazolo[3,4-d]pyrimidine derivatives were prepared via reaction of 5-amino-3-methyl-1-phenyl-1H-pyrazole-4-carbonitrile with various nitriles in the presence of sodium ethoxide as catalyst. The inhibitory properties of synthesized compounds were studied according to CLSI guidelines against some pathogenic bacteria including four gram-positive strains (Streptococcus pyogenes, Staphylococcus aureus, Bacillus cereus and Bacillus subtilis subsp. spizizenii) and three gram-negative strains (Pseudomonas aeruginosa, Shigella flexneri and Salmonella enterica subsp. enterica). The antibacterial effects of all derivatives were compared with those of antibiotics belonging to different classes. The values were reported as inhibition zone diameter (IZD), minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC). The effect of substituents on the biological activity of derivatives was discussed as well. The inhibitory effect of compound 6a, was shown to be the most, with MIC values in the range of 32–4096 μg/mL. Since most of the synthesized compounds were effective against Streptococcus pyogenes and Pseudomonas aeruginosa, they can be considered as inhibitors of these two bacteria.     

Oxidative degradation of levofloxacin by water-soluble manganese dioxide in aqueous acidic medium: a kinetic study

Pharmaceuticals, especially fluoroquinolone antibiotics, have received increasing global concern, due to their intensive use in the environment and potential harm to ecological system as well as human health. Degradation of antibiotics, such as oxidative degradation by metal oxides, often plays an important role in the elimination of antibiotics from the environment. The kinetics of oxidation of levofloxacin by water-soluble manganese dioxide has been studied in aqueous acidic medium at 25 °C temperature. The stoichiometry for the reaction indicates that the oxidation of 1 mol of levofloxacin requires 1 mol of manganese dioxide. The reaction is second order, that is first order with respect to manganese dioxide and levofloxacin. The rate of reaction increases with the increasing [H⁺] ion concentration. A probable reaction mechanism, in agreement with the observed kinetic results, has been proposed and discussed. The energy and enthalpy of activation have been calculated to be 30.54 and 28.07 kJ mol^?1, respectively.     

The optical properties of a novel metal-free phthalocyanine

In the present work, 4-(4′-dodecyloxycarbonyl) phenoxy phthalonitrile was synthesized and then this phthalonitrile derivative was cyclotetramerized in dodecanol resulting a new metal-free phthalocyanine. The optical properties of this phthalocyanine were investigated. Novel metal-free phthalocyanine thin films were deposited on indium tin oxide-coated glass substrates by spinning method. Surface and microstructural properties of the films were characterized by atomic force microscopy and scanning electron microscopy. Both the transmittance and reflectance spectra of the deposited films were recorded using an NKD analyser. The optical band gap energy, the thickness of thin films, refractive index (n) and extinction coefficient (k) were calculated as 2.7 eV, 300 nm, 1.47 and 0.02, respectively.     

Atom transfer radical polymerization of methyl methacrylate using copper-based homogeneous and heterogeneous catalysts

This study aimed at polymerization of methyl methacrylate with novel catalysts in the atom transfer radical polymerization (ATRP) condition at 90 °C. This was accomplished using CuBr/N-(2-aminoethyl)-3-aminopropyltrimethoxysilane (CuBr–AEAPTMS) as a homogeneous catalyst and one time with CuBr@AEAPTMS/SBA-15 as a heterogeneous catalyst. Catalysts were characterized using TGA, FT-IR, and UV–Vis spectroscopy. The structural analysis of the polymer was carried out by ¹³C NMR spectroscopy and GPC. Three characteristic parts of polymer produced by ATRP method including the initiator, monomer units, and end group was shown in ¹³C NMR spectra. In addition, the presence of C–Br unit showed that the polymerization process is alive. The ¹H NMR analysis was used for kinetic investigation of methyl methacrylate polymerization with homogeneous and heterogeneous catalysts that showed high monomer conversion (98 and 90% after 35 min, respectively) and good control of molecular weight with a dispersity (Р= 1.5–1.7). In addition, the plot of ln ([monomer]₀/[monomer] _t ) versus time gave linear relationships indicating a constant concentration of the propagating species throughout the polymerization. Finally, the results of the polymerization using heterogeneous catalyst compared with homogeneous catalyst revealed that it was according to ATRP method.     

Enzymatic epoxidation of soybean oil in the presence of perbutyric acid

Enzymatic epoxidation of vegetable oils using a long chain fatty acid as an active oxygen carrier could produce a desirable epoxy oxygen group content (EOC); however, the acid value (AV) of final epoxidized oil is too high. The present study was to investigate the effect of different fatty acids with varying length of carbon chain on EOC and AV of the final epoxidized soybean oil (ESO); finding butyric acid was the choice of active oxygen carrier when hydrogen peroxide was used as an oxygen donor in the presence of lipase Novozyme 435. And in situ IR was used to monitor the epoxidation process, which revealed that the formation of perbutyric acid was the key step in the whole reaction. The epoxidation process was optimized as follows: molar ratio of butyric acid/C=C bonds of 0.19:1, 8% of immobilized lipase Novozyme 435 load (relative to the weight of soybean oil) and molar ratio of H₂O₂/C=C bonds of 3.5:1, reaction time of 4 h and reaction temperature of 45 °C. Under these conditions, ESO with a high EOC (7.62 ± 0.20%) and a lower AV value (8.53 ± 0.18 mgKOH/g) was obtained. The oxriane conversion degree was up to 97.94%.     

Antimicrobial activity of newly synthesized thienoquinolizidines derivatives: inspired by natural plant alkaloids

The antimicrobial activity of 16 newly prepared quinolizidines derivatives using bacteria (Staphylococcus aureus, Staphylococcus epidermidis, Proteus sp., Escherichia coli) acid fast bacterium Mycobacterium smegmatis, yeasts (Candida albicans, Candida parapsilosis), and filamentous fungi (Fusarium culmorum, Microsporum gypseum, Aspergillus flavus, Botrytis cinerea, Alternaria alternata) was studied in this paper. The best antibacterial properties were demonstrated by derivatives 11Ba, trans10Bb and 11Bb, and the most sensitive microorganism was found to be the gram-positive bacterium S. epidermidis. The derivative 11Bb showed the best antifungal activity, while C. albicans was resistant to all tested derivatives, and C. parapsilosis was fully inhibited in the presence of the derivative 11Ba and 11Bb. Among the filamentous fungi, only the dermatophyte M. gypseum was partially inhibited. Biofilms represent the most prevalent type of microbial growth in nature and are crucial to the development of clinical infections. Newly synthesized derivatives were also added into the medium throughout the biofilm formation. We have observed a significant decrease of biofilm formation in the presence of quinolizidine derivatives, testifying to their significant antimicrobial activity. It seems that the relationship between antimicrobial activity and the structure is based on the alkaline character due to nitrogen, the saturated basic quinolizidine skeleton, and the position of sulfur in the molecule.