Transition-Metal-Free Heterocyclic Carbon-Boron Bond Formation

Heteroaryl boronic acids and esters are extremely important and valuable intermediates because of their wide application in the synthesis of marketed drugs and bioactive compounds. Over the last couple of decades, the construction of highly important heteroaryl carbon-boron bonds has created huge attention. The transition-metal-free protocols are more green, less sensitive to air and moisture, and also economically advantageous over the transition-metal-based protocols. The transition-metal-free C−H borylation of heteroarenes and C−X (X=halogen) borylation of heteroaryl halides represents an excellent approach for their synthesis. Also, various cyclization and alkyne activation protocols have been recently established for their synthesis. The goal of this review article is to summarize the existing literature and the current state of the art for transition-metal-free synthesis of heteroaryl boronic acid and esters.     

A novel approach for the one-pot synthesis of linear and angular fused quinazolinones

A convenient and inexpensive one step methodology has been developed for the synthesis of linear and angular fused quinazolinones. The protocol, which uses amino heterocycles and o-bromo benzyl/naphthyl bromides as reactants, CuI as catalyst, Cs₂CO₃ as base, l-proline as ligand, and DMF as solvent, proceeds via nucleophilic aromatic substitution of the N-heteroaromatic cationic intermediate followed by in situ aerial oxidation at the benzylic position to the quinazolinone scaffold.     

Photoelectron imaging spectroscopy and theoretical investigation of ZrSi

The photoelectron spectrum of ZrSi(-) has been measured at two different photon energies: 2.33 eV and 3.49 eV, providing electron binding energy and photoelectron angular distribution information. The obtained vertical detachment energy of ZrSi(-) is 1.584(14) eV. The neutral ground and excited state terms are assigned based on experimental and theoretical results. The ground state of ZrSi is tentatively assigned as a (3)Σ(+) state with a configuration of 1σ(2) 1π(4) 1δ(0) 2σ(1) 3σ(1). A low lying (3)Π(i) neutral excited state is identified to be 0.238 eV (1919 cm(-1)) above the ground state. The anion ground state is designated as a (2)Σ(+) state with a 1σ(2) 1π(4) 1δ(0) 2σ(2) 3σ(1) valence electron configuration. A Franck-Condon (FC) simulation of the photoelectron spectrum has been carried out. For the (3)Σ(+) ← (2)Σ(+) band, theoretically calculated bond lengths and frequencies are used in the FC calculation which give good agreement with experiment, while for the (3)Π(i) ← (2)Σ(+) band, the ZrSi bond length is estimated from the FC spectrum. Comparisons are made with previously published theoretical studies and inconsistencies are pointed out. To the best of our knowledge, this study provides the first spectroscopic information on the transition metal-silicon diatomic, ZrSi.     

Magnetic exchange interactions and magneto-structural correlations in heterobridged μ-phenoxo-μ(1,1)-azide dinickel(II) compounds: a combined experimental and theoretical exploration

This investigation presents the syntheses, crystal structures, magnetic properties, and density functional theoretical modeling of magnetic behavior of two heterobridged μ-phenoxo-μ(1,1)-azido dinickel(II) compounds [Ni(II)(2)(L(1))(2)(μ(1,1)-N(3))(N(3))(H(2)O)]·CH(3)CH(2)OH (1) and [Ni(II)(2)(L(2))(2)(μ(1,1)-N(3))(CH(3)CN)(H(2)O)](ClO(4))·H(2)O·CH(3)CN (2), where HL(1) and HL(2) are the [1+1] condensation products of 3-methoxysalicylaldehyde and 1-(2-aminoethyl)-piperidine (for HL(1))/4-(2-aminoethyl)-morpholine (for HL(2)), along with density functional theoretical magneto-structural correlations of μ-phenoxo-μ(1,1)-azido dinickel(II) systems. Compounds 1 and 2 crystallize in orthorhombic (space group Pbca) and monoclinic (space group P2(1)/c) systems, respectively. The coordination environments of both metal centers are distorted octahedral. The variable-temperature (2-300 K) magnetic susceptibilities at 0.7 T of both compounds have been measured. The interaction between the metal centers is moderately ferromagnetic; J = 16.6 cm(-1), g = 2.2, and D = -7.3 cm(-1) for 1 and J = 16.92 cm(-1), g = 2.2, and D(Ni1) = D(Ni2) = -6.41 cm(-1) for 2. Broken symmetry density functional calculations of exchange interaction have been performed on complexes 1 and 2 and provide a good numerical estimate of J values (15.8 cm(-1) for 1 and 15.35 cm(-1) for 2) compared to experiments. The role of Ni-N bond length asymmetry on the magnetic coupling has been noted by comparing the structures and J values of complexes 1 and 2 together with previously published dimers 3 (Eur. J. Inorg. Chem. 2009, 4982), 4 (Inorg. Chem. 2004, 43, 2427), and 5 (Dalton Trans. 2008, 6539). Our extensive DFT calculations reveal an important clue to the mechanism of coupling where the orientation of the magnetic orbitals seems to differ with asymmetry in the Ni-N bond lengths. This difference in orientation leads to a large change in the overlap integral between the magnetic orbitals and thus the magnetic coupling. DFT calculations have also been extended to develop several magneto-structural correlations in this type of complexes and the correlation aim to focus on the asymmetry of the Ni-N bond lengths reveal that the asymmetry plays a proactive role in governing the magnitude of the coupling. From a completely symmetric Ni-N bond length, two behaviors have been noted: with a decrease in bond length there is an increase in the ferromagnetic coupling, while an increase in the bond lengths leads to a decrease in ferromagnetic interaction. The later correlation is supported by experiments. The magnetic properties of 1, 2, and three previously reported related compounds have been discussed in light of the structural parameters and also in light of the theoretical correlations determined here.     

High heat of hydrogen adsorption and guest-responsive magnetic modulation in a 3D porous pillared-layer coordination framework

A bimetallic pillared-layer coordination framework {[Mn(3)(bipy)(3)(H(2)O)(4)][Cr(CN)(6)](2)·2(bipy)·4(H(2)O)}(n) has been constructed using a cyanometallate anion ([Cr(CN)(6)](3-)) and an organic linker (4,4'-bipyridyl) that provides high heat of hydrogen adsorption (～11.5 kJ mol(-1)) and shows guest dependent magnetic modulation.     

Rationalisation of extractive protocol by high-performance thin-layer chromatographic–densitometric quantification of berberine in multiple hydroalcoholic extract of Tinospora cordifolia stem

JPC – Journal of Planar Chromatography – Modern TLC - Drug development from medicinal plants by using various hydroalcoholic solvents has been an emerging trend in the last few decades....     

Natural Phytocompounds from Common Indian Spices for Identification of Three Potential Inhibitors of Breast Cancer: A Molecular Modelling Approach

Breast cancer is the second most common cancer-related cause of death for women throughout the globe. In spite of some effective measures, the main concerns with traditional anti-cancer chemotherapy are its low bioavailability, physical side effects, acquired resistance of cancer cells and non-specific targeting. Now researchers have taken the initiative to establish natural product-based therapy methods and to identify viable hits for future lead optimization in the development of breast cancer medication. Our study aims to identify the potent phytocompounds from five very popular Indian spices (Zingiber officinale Roscoe, Cuminum cyminum L., Piper nigrum L., Curcuma longa L., and Allium sativum L.). From these spices, a total of 200 phytocompounds were identified and screened against three target genes, namely, cyclin-dependent kinase 8 (CDK 8), progesterone receptor (PR) and epidermal growth factor receptor (EGFR), through structure-based virtual screening using iGEMDOCK 2.1 software. Based on the binding affinity score, the top three phytocompounds against each target protein (cynaroside (−149.66 Kcal/mol), apigetrin (−139.527 Kcal/mol) and curcumin (−138.149 Kcal/mol) against CDK8; apigetrin (−123.298 Kcal/mol), cynaroside (−118.635 Kcal/mol) and xyloglucan (−113.788 Kcal/mol) against PR; cynaroside (−119.18 Kcal/mol), apigetrin (−105.185 Kcal/mol) and xyloglucan (−105.106 Kcal/mol) against EGFR) were selected. Apigetrin, cynaroside, curcumin, and xyloglucan were finally identified for further docking analysis with the respective three target proteins. Autodock 4.2 was applied to screen the optimal binding position and to assess the relative intensity of binding interactions. In addition, the ADME/T property checks and bioactivity scores analysis of were performed to understand the suitability of these four phytocompounds to be potential candidates for developing effective and non-toxic anticancer agents. Based on this in silico analysis, we believe this study could contribute to current efforts to develop new drugs for treating breast cancer.     

Fabrication and evaluation of self-nanoemulsifying oil formulations (SNEOFs) of Efavirenz

The current work designed to fabricate and evaluate self-nanoemulsfying oil formulations (SNEOFs) of Efavirenz (Efz) a BCS class II drug with the objective of increasing its solubility as well as in vitro dissolution rate for improvisation of bioavailability. Preliminary screening of drug which includes solubility, emulsifying ability and ternary phase diagrams was carried out to fabricate SNEOFs. Various thermodynamic stability studies were exercised to find out the stable SNEOFs. Robustness to dilution, % transmittance and turbidity, droplet size analysis, TEM study, cloud point measurement, viscosity and refractive index were executed on the stable SNEOFs to characterize the delivery system. FTIR study was adopted for the compatibility of the additives with the drug. In vitro release profiles of SNEOFs compared with Efz, percent dissolution efficiency (DE) and dissolution half-life (t₅₀) were evaluated. A low percent DE (30.12%) and high t₅₀ was obtained for Efz whereas all SNEOFs showed a DE of greater than 78.48% and less than 9?min t₅₀. The optimized SNEOFs (F8) demonstrated a significant (p?<?0.05) increase in bioavailability over Efz. Thus the designed optimized delivery system could be instrumental in increasing aqueous solubility of Efz, improving its release performance and enhancement of oral absorption.     

Energetics and role of the hydrophobic interaction during photoreaction of the BLUF domain of AppA

A recently developed method for time-resolved thermodynamic measurements was used to study the photochemical reaction(s) of the BLUF domain of AppA (AppA-BLUF), which has a dimeric form in the ground state, in terms of the energetics and heat capacity changes (DeltaC(p)) in different time domains. The enthalpy change (DeltaH) of the first intermediate that forms within 1 ns after photoexcitation was 38 (+/-8) kJ mol(-1) at 298 K. The heat capacity change (DeltaC(p)) upon formation of this intermediate was positive [1.4 (+/-0.3) kJ mol(-1) K(-1)]. This positive DeltaC(p) suggests that the hydrophobic surface area of AppA-BLUF exposed to the bulk solvent increased. After this initial transition, a dimerization reaction with another ground-state dimer (i.e., tetramer formation) takes place. Upon this reaction, the energy was stabilized to 26 (+/-6) kJ mol(-1) at 298 K. Interestingly, the dimer formation was accompanied by a larger but negative DeltaC(p) [-6.0 (+/-1) kJ mol(-1) K(-1)]. This negative DeltaC(p) might indicate buried hydrophobic residues at the interface of the dimer and/or the existence of trapped water at the interface. We suggest that hydrophobic interactions are the main driving force for the formation of the dimer upon photoactivation of AppA-BLUF.     

Supramolecular Subphthalocyanine Cage as Catalytic Container for the Functionalization of Fullerenes in Water

Herein we report the first example of a supramolecular cage that works as a catalytic molecular reactor to perform transformations over fullerenes in aqueous medium. Taking advantage of the ability of metallo–organic Pd(II)-subphthalocyanine (SubPc) capsules to form stable host:guest complexes with C₆₀, we have prepared a water-soluble cage that provides a hydrophobic environment for conducting cycloadditions over encapsulated C₆₀, namely, Diels–Alder reactions with anthracene. Indeed, the presence of catalytic amounts of SubPc cage dissolved in water promotes co-encapsulation of insoluble C₆₀ and anthracene substrates, allowing the reaction to occur inside the cavity under mild conditions. The lower stability of the host:guest complex with the resulting C₆₀ cycloadduct facilitates its displacement by pristine C₆₀, which grants catalytic turnover. Moreover, bis-addition compounds are regioselectively formed inside the cage when using excess anthracene.