Resonantly enhanced off-specular X-ray scattering from polymer/polymer interfaces<Superscript>⋆</Superscript>

We have used measurements of the absolute intensity of diffuse X-ray scattering to extract the interfacial tension of a buried polymer/polymer interface. Diffuse scattering was excited by an X-ray standing wave whose phase was adjusted to have a high intensity at the polymer/polymer interface and simultaneously a node at the polymer/air interface. This method permits the capillary-wave-induced roughness of the interface, and hence the interfacial tension, to be measured independently of the polymer/polymer interdiffusion.     

Real-time evolution of the distribution of nanoparticles in an ultrathin-polymer-film-based waveguide

We report a novel application of an ultrathin-polymer-film-based, resonance-enhanced x-ray waveguide as a real-time nanoprobe for elucidating dilute, yet disordered, gold nanoparticles embedded in the polymer matrix. This nanoprobe promises a sensitivity enhancement of several orders of magnitude, hence revealing in real time the lateral nanoparticle distribution with subnanometer spatial resolution. We observed that the motion of the nanoparticles is strongly anisotropic, with in-plane coalescence taking place more rapidly than out-of-plane diffusion, which can ultimately facilitate the formation of two-dimensional structures.     

Robustness of spatial average equalization: a statistical reverberation model approach

Traditionally, multiple listener room equalization is performed to improve sound quality at all listeners, during audio playback, in a multiple listener environment (e.g., movie theaters, automobiles, etc.). A typical way of doing multiple listener equalization is through spatial averaging, where the room responses are averaged spatially between positions and an inverse equalization filter is found from the spatially averaged result. However, the equalization performance, will be affected if there is a mismatch between the position of the microphones (which are used for measuring the room responses for designing the equalization filter) and the actual center of listener head position (during playback). In this paper, we will present results on the effects of microphone-listener mismatch on spatial average equalization performance. The results indicate that, for the analyzed rectangular configuration, the region of effective equalization depends on (i) the distance of a listener from the source, (ii) the amount of mismatch between the responses, and (iii) the frequency of the audio signal. We also present some convergence analysis to interpret the results.     

Enhanced intravenous transgene expression in mouse lung using cyclic-head cationic lipids

Herein, we report enhanced intravenous mouse lung transfection using novel cyclic-head-group analogs of usually open-head cationic transfection lipids. Design and synthesis of the new cyclic-head lipid N,N-di-n-tetradecyl-3,4-dihydroxy-pyrrolidinium chloride (lipid 1) and its higher alkyl-chain analogs (lipids 2-4) and relative in vitro and in vivo gene transfer efficacies of cyclic-head lipids 1-4 to their corresponding open-head analogs [lipid 5, namely N,N-di-n-tetradecyl-N,N-(2-hydroxyethyl)ammonium chloride and its higher alkyl-chain analogs, lipids 6-8] have been described. In stark contrast to comparable in vitro transfection efficacies of both the cyclic- and open-head lipids, lipids 1-4 with cyclic heads were found to be significantly more efficient (by 5- to 11-fold) in transfecting mouse lung than their corresponding open-head analogs (5-8) upon intravenous administration. The cyclic-head lipid 3 with di-stearyl hydrophobic tail was found to be the most promising for future applications.     

Synthesis,ABTS-Radical Scavenging Activity,and Antiproliferative and Molecular Docking Studies of Novel Pyrrolo[1,2-a]quinoline Derivatives

A new 2,2′-azinobis-(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS)-radical scavenging and antiproliferative agents of pyrrolo[1,2-a]quinoline derivatives have been synthesized. An efficient method for the synthesis of 14 novel diversified pyrrolo[1,2-a]quinoline derivatives has been described using 4-(1,3-dioxolan-2-yl)quinoline and different phenacyl bromides in acetone and followed by reacting with different acetylenes in dimethylformamide/K₂CO₃. The structure of the newly synthesized compounds was determined by infrared, ¹H NMR, ¹³C NMR, mass spectrometry, and elemental analysis. The in vitro antioxidant activity revealed that among all the tested compounds 5n exhibited maximum scavenging activity with ABTS. Compound 5b has showed good antiproliferative activity as an inhibitor of epidermal growth factor receptor (EGFR) tyrosine kinase.     

Stokes drag on axially symmetric bodies: a new approach

In this paper a new approach to evaluate the drag force in a simple way on a restricted axially symmetric body placed in a uniform stream (i) parallel to its axis, (ii) transverse to its axis, is advanced when the flow is governed by the Stokes equations. The method exploits the well-known integral for evaluating the drag on a sphere. The method not only provides the value of the drag on prolate and oblate spheroids and a deformed sphere in axial flow which already exists in literature but also new results for a cycloidal body, an egg shaped body and a deformed sphere in transverse flow. The salient results are exhibited graphically. The limitations imposed on the analysis because of the lack of fore and aft symmetry in the case of an eggshaped body is also indicated. It is also seen that the analysis can be extended to calculate the couple on a body rotating about its axis of symmetry.     

Synthesis and characterization of block copolymers from 2‐vinylnaphthalene by anionic polymerization

The anionic polymerization of 2‐vinylnaphthalene (2VN) has been studied in tetrahydrofuran (THF) at ?78 °C and in toluene at 40 °C. 2VN polymerization in THF, toluene, or toluene/THF (99:1 v/v) initiated by sec‐butyllithium (sBuLi) indicates living characteristics, affording polymers with predefined molecular weights and narrow molecular weight distributions. Block copolymers of 2VN with methyl methacrylate (MMA) and tert‐butyl acrylate (tBA) have been synthesized successfully by sequential monomer addition in THF at ?78 °C initiated by an adduct of sBuLi–LiCl. The crossover propagation from poly(2‐vinylnaphthyllithium) (P2VN) macroanions to MMA and tBA appears to be living, the molecular weight and composition can be predicted, and the molecular weight distribution of the resulting block copolymer is narrow (weight‐average molecular/number‐average molecular weight < 1.3). Block copolymers with different chain lengths for the P2VN segment can easily be prepared by variations in the monomer ratios. The block copolymerization of 2VN with hexamethylcyclotrisiloxane also results in a block copolymer of P2VN and poly(dimethylsiloxane) (PDMS) contaminated with a significant amount of homo‐PDMS. Poly(2VN‐b‐nBA) (where nBA is n‐butyl acrylate) has also been prepared by the transesterification reaction of the poly(2VN‐b‐tBA) block copolymer. Size exclusion chromatography, Fourier transform infrared, and ¹H NMR measurements indicate that the resulting polymers have the required architecture. The corresponding amphiphilic block copolymer of poly(2VN‐b‐AA) (where AA is acrylic acid) has been synthesized by acidic hydrolysis of the ester group of tert‐butyl from the poly(2VN‐b‐tBA) copolymer. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4387–4397, 2002     

Effect of molecular weight on synthesis and surface morphology of high-density poly(ethylene glycol) grafted layers

This work describes studying the permanent grafting of carboxylic acid end-functionalized poly(ethylene glycol) methyl ether (PEG) chains of different molecular weights from the melt onto a surface employing poly(glycidyl methacrylate) ultrathin film as an anchoring layer. The grafting led to the synthesis of the complete PEG brushes possessing exceptionally high grafting density. The maximum thickness of the attached PEG films was strongly dependent on the length of the polymer chains being grafted. The maximum grafting efficiency was close to the critical entanglement molecular weight region for PEG. All grafted PEG layers were in the "brush regime", since the distance between grafting sites for the layers was lower than the end-to-end distance for the anchored macromolecules. Scanning probe microscopy revealed that the grafting process led to complete PEG layers with surface smoothness on a nanometric scale. Practically all samples were partly or fully covered with crystalline domains that disappeared when samples were scanned under water. Due to the PEG hydrophilic nature, the surface with the grafted layer exhibited a low (up to 21 degrees ) water contact angle.     

Formation and stability of a Janus-Wedge type of DNA triplex

A new type of DNA targeting with the formation of a Janus-Wedge (J-W) triple helix is described. The "wedge" residue (W) attached to a PNA backbone is designed to insert itself into double-stranded DNA and base pair with both Watson-Crick faces. To study the stability of such an assembly, we have examined the formation of the J-W triplex with dC8 - T8 target sequence. The use of this target sequence permits the study of this new helix form without competing Watson-Crick interactions between the two target residues. Studies indicate that the W strand binds to both target strands, with defined polarity and a stability (-15.2 kcal/mol) that is roughly the sum of the two independent duplex interactions.     

Efficient and selective enzymatic acylation reaction: separation of furanosyl and pyranosyl nucleosides

Candida antarctica lipase-B (CAL-B) immobilized on lewatite selectively acylated the primary hydroxyl group of the furanosyl nucleoside in a mixture of 1-(alpha-D-arabinofuranosyl)thymine and 1-(alpha-D-arabinopyranosyl)thymine. This selective biocatalytic acylation of furanosyl nucleoside has enabled us an easy separation of arabinofuranosyl thymine from an inseparable mixture with arabinopyranosyl thymine. The primary hydroxyl selective acylation methodology of arabinonucleoside has also been successfully used for the separation of 1-(beta-D-xylofuranosyl)thymine and 1-(beta-D-xylopyranosyl)thymine from a mixture of the two, which demonstrate the generality of the enzymatic methodology for separation of furanosyl and pyranosyl nucleosides.