A general synthesis of substituted formylpyrroles from ketones and 4-formyloxazole

A novel two-step synthesis of substituted 2-formylpyrroles is described. Aldol adducts of ketones and 4-formyloxazole undergo a dehydration/oxazole hydrolysis/cyclization cascade on sequential treatment with MsCl/Et3N and aqueous NaOH to yield 5-substituted and 4,5-disubstituted 2-formylpyrroles. The methodology was extended to an N-benzyl thiazolium salt.     

Probing buried carbon nanotubes within polymer-nanotube composite matrices by atomic force microscopy

Multi-walled carbon nanotubes (MW-CNT) inside a polyamide-6 (PA6)-MW-CNT composite were visualized by atomic force microscopy (i) in a field-assisted intermittent contact and (ii) in the tunneling (TUNA) mode. Individual buried MW-CNTs were clearly discerned within the PA6 matrix. An average diameter of 33 ± 5 nm of the MW-CNTs was determined based on field-assisted intermittent contact mode AFM images, which is consistent with the expected size of PA6-coated MW-CNTs. Single well dispersed MW-CNTs that are located in the sub-surface region of the composite were also observed in the TUNA mode. These new AFM approaches circumvent the tedious sample preparation based on ultramicrotoming required for high resolution electron microscopy studies to obtain “in-depth” morphological information and hence are expected to facilitate the analysis of CNT-based and other nanocomposites in the future.     

SKH-1 hairless mice repair UV-induced pyrimidine dimers in epidermal DNA

The SKH-1 hairless mouse strain has been used extensively as a model for human photocarcinogenesis, photoimmunology and photoaging, but little is known about DNA repair in living mouse skin. Mice were irradiated with UV-B light at doses which produce mild to severe sunburn, and the frequency of pyrimidine dimers in epidermal DNA was measured immediately and 6 h after irradiation using T4 endonuclease V treatment and alkaline agarose gel electrophoresis. The results demonstrate significant removal of pyrimidine dimers in mouse skin in vivo, with a dimer half-life of 7.4 h. These findings are similar to the repair of dimers in human skin in vivo. The SKH-1 hairless mouse is thus a useful model for pyrimidine dimer repair in human skin.     

A two-dimensional octacyanomolybdate(V)-based ferrimagnet: {[Mn(II)(DMF)4]3[Mo(V)(CN)8]2}n

Treatment of [HNBu3]3[Mo(V)(CN)8] with manganese(II) p-toluenesulfonate in N,N'-dimethylformamide (DMF) affords {[Mn(II)(DMF)4]3[Mo(V)(CN)8]2}n (1) as a two-dimensional network. The structure of 1 consists of [cis-Mn(II)(DMF)4(mu-NC)2]2+ and [trans-Mn(II)(DMF)4(mu-NC)2]2+ units that are linked via cyanides to three-connected [Mo(V)(CN)5(mu-CN)3]3- centers in a 4:2:6 ratio, forming 12-membered rings. Magnetic measurements indicate that 1 is a ferrimagnet (TN = 8 K) that exhibits frequency-dependent behavior in chi". Heating of 1 affords an additional magnetic phase (TN = 21 K) that is absent of linkage isomerism.     

Activation of TMSCN by N-heterocyclic carbenes for facile cyanosilylation of carbonyl compounds

N-Heterocyclic carbenes were found to be highly effective organocatalysts in activating TMSCN for facile cyanosilylation of carbonyl compounds. Cyano transfer from TMSCN to aldehydes and ketones proceeds at room temperature in the presence of only 0.01-0.5 mol % of N-heterocyclic carbene (1), leading to a range of trimethylsilylated cyanohydrins in very good to excellent yields. These conditions are extremely mild and simple and tolerate various functional groups.     

Assessment of Joule heating and its effects on electroosmotic flow and electrophoretic transport of solutes in microfluidic channels

Joule heating is inevitable when an electric field is applied across a conducting medium. It would impose limitations on the performance of electrokinetic microfluidic devices. This article presents a 3-D mathematical model for Joule heating and its effects on the EOF and electrophoretic transport of solutes in microfluidic channels. The governing equations were numerically solved using the finite-volume method. Experiments were carried out to investigate the Joule heating associated phenomena and to verify the numerical models. A rhodamine B-based thermometry technique was employed to measure the solution temperature distributions in microfluidic channels. The microparticle image velocimetry technique was used to measure the velocity profiles of EOF under the influence of Joule heating. The numerical solutions were compared with experimental results, and reasonable agreement was found. It is found that with the presence of Joule heating, the EOF velocity deviates from its normal "plug-like" profile. The numerical simulations show that Joule heating not only accelerates the sample transport but also distorts the shape of the sample band.     

Surface dynamics of coadsorbed CO and D2O on Pt(100) in ultrahigh vacuum as studied by time-resolved infrared reflection absorption spectroscopy

Changes in the properties of CO adsorbed at saturation coverages on Pt(100) induced by subsequent coadsorption of fixed amounts of D2O at 105 K in ultrahigh vacuum (UHV) were monitored by time-resolved infrared reflection absorption spectroscopy (tr-IRAS). The linear- and bridge-bonded CO stretching features were found to change in intensity and shift toward lower energies as a function of time at fixed CO and D2O coverages. Also observed was the development of multiple features in both CO spectral regions depending on the amount of D2O on the surface. These findings indicate that, under the conditions of these experiments, the interfacial dynamics are relatively slow, on the order of minutes, involving a gradual rearrangement of adsorbed CO and D2O on the surface to yield surface solvated CO, as has been suggested in the literature (Kizhakevariam et al. J. Chem. Phys. 1994, 100, 6750). This factor should be considered when comparing, quantitatively, shifts induced by water coadsorption with CO on Pt single crystals in UHV with CO adsorption on the same surfaces in electrochemical environments.     

Investigation of efflorescence of inorganic aerosols using fluorescence spectroscopy

The phase transition is one of the most fundamental phenomena affecting the physical and chemical properties of atmospheric aerosols. Efflorescence, in particular, is not well understood, partly because the molecular interactions between the solute and water molecules of saturated or supersaturated solution droplets have not been well characterized. Recently, we developed a technique that combines the use of an electrodynamic balance and a fluorescence dye, 8-hydroxyl-1,3,6-pyrenetrisulfonate (pyranine), to study the distributions of solvated and free water in aqueous droplets (Choi, M. Y.; Chan, C. K.; Zhang, Y. H. J. Phys. Chem. A 2004, 108, 1133). We found that the equality of the amounts of solvated and free water is a necessary but not sufficient condition for efflorescence. For efflorescing compounds such as Na2SO4, (NH4)2SO4, and a mixture of NaCl and Na2SO4, the amount of free water decreases, while that of solvated water is roughly constant in bulk measurements and decreases less dramatically than that of free water in single-particle measurements as the relative humidity (RH) decreases. Efflorescence of the supersaturated droplets of these solutions occurs when the amounts of free and solvated water are equal, which is consistent with our previous observation for NaCl. For nonefflorescing compounds in single-particle levitation experiments such as MgSO4 and Mg(NO3)2, the amounts of free and solvated water are equal at a water-to-solute molar ratio of about 6, at which spectral changes due to the formation of contact ion pairs between magnesium and the anions occur as shown by Raman spectroscopy. Fluorescence imaging shows that the droplets of diluted Mg(NO3)2 (at 80% RH) and MgSO4 are homogeneous but those of NaCl, Na2SO4, (NH4)2SO4, and supersaturated Mg(NO3)2 (at 10% RH) are heterogeneous in terms of the solvated-to-free water distribution. The solvated-to-free water ratios in NaCl, Na2SO4, and (NH4)2SO4 droplets are higher in the outer regions by about half a radius deep than at the center of the droplets.     

Validation of the LacTek test applied to spiked extracts of tissue samples: determination of performance characteristics

LacTek tests are competitive enzyme-linked immunosorbent assays intended for rapid detection of antimicrobial residues in bovine milk. In this study, the LacTek test protocol was modified for use with extracts of bovine tissue to detect beta-lactam, tetracycline, and sulfamethazine residues. Test performance characteristics--precision, accuracy, ruggedness, practicability, and analytical specificity and sensitivity--were investigated. Results suggest that LacTek tests can be easily adapted to detect antimicrobial residues in extracts of lean ground beef. However, positive samples may not contain residues at violative concentrations (i.e., Canadian maximum residue limits), and therefore, additional analysis would be required for final confirmation and quantitation (e.g., chromatography).