Numerical visualization of vortical structures in a lean premixed swirl combustor using LES

Abstract  

Large eddy simulation was performed to visualize the three-dimensional vortical structures interacting with a turbulent premixed in a lean premixed swirl combustor with varied equivalence ratio. It was found that the fluctuation of unsteady heat release due to the deformation of flame surface was significantly decreased as the equivalence ratio increased because of the change in interaction between inner vortical structures and flames. This phenomenon was another evidence of the amplification mechanism in the combustion instabilities due to the strong flame–vortex interactions under lean premixed conditions.     

Performance limits of pico-cell systems using radio-over-fiber techniques with an electroabsorption modulator

We investigate the performance limits of a pico-cell system using the radio- over-fiber technique with an electroabsorption modulator (EAM) in a 2.4 GHz wireless local area network (WLAN) environment. To understand the performance limits of the system using an EAM as the optical transceiver, we vary the optical modulation index (OMI) of the transmitter for different bias voltages to the EAM. Power margins in the links are found to estimate a possible service range, and packet loss rates (PLRs) in the pico-cell system are measured to evaluate the transmission performance. The total service range can be extended up to 3 m by adjusting the OMI of the transmitter for different applied bias voltages to the EAM.     

Bimodal fission in binary and ternary spontaneous fission of 252Cf

The hot bimodal fission of ²⁵²Cf is reexamined with new high-statistics data. We constructed a γ-γ-γ coincidence cube for binary fission and LCP-gated γ-γ matrix for ternary fission. By identifying the secondary fission fragments from their γ-ray transitions, we measured the yields for various fission splits. The normal neutron yield distribution is found to be Gaussian for Xe-Ru. However, the binary fission split of Ba-Mo is found to exhibit a bimodal neutron distribution with the “hot mode” corresponding to ≈3.1% of the total yield. In α ternary fission, the first measurements of yields for specific fission splits are presented. The Te-α-Ru and Xe-α-Mo neutron yields fit well with a single mode, but the Ba-α-Zr split shows evidence for an enhanced hot mode with an intensity of ≈13.8% of the normal mode. The text was submitted by the authors in English.     

Collective bands in 104,106,108Mo

We have used our analysis of γ-γ-γ data (5.7 × 10¹¹ triples and higher folds) taken with Gammasphere from prompt γ rays emitted in the spontaneous fission of ²⁵²Cf to study the collective bands in ^104,106,108Mo. The one-phonon and two-phonon γ-vibrational bands and known two-quasiparticle bands in neutron-rich ^104,106Mo were extended to higher spins. The one-and two-phonon γ-vibrational bands have remarkably close energies for transitions from the same spin states and identical moments of inertia. Several new bands are observed and are proposed as quasiparticle bands in ^104,106Mo, along with the first β-type vibrational band in ¹⁰⁶Mo. The quasiparticle bands have essentially constant moments of inertia near the rigid-body value that indicate blocking of the pairing interaction. Candidates for chiral doublet bands in ¹⁰⁶Mo are strong. These are the first reported chiral vibrational bands in an even-even nucleus. The text was submitted by the authors in English.     

Interaction of Ag with the Si(1 1 1)1 × 1–H surface

Synchrotron radiation based photoemission spectroscopy (SRPES) and low energy electron diffraction (LEED) are used to study the interaction between Ag atoms and the Si(1 1 1)1 × 1–H surface. At an Ag coverage of 0.063 monolayers (ML) on the Si(1 1 1)1 × 1–H surface, the Si 2p component corresponding to Si–H bonds decreases, and an additional Si 2p component appears which shifts to a lower binding energy by 109 meV with respect to the Si bulk peak. The new Si 2p component is also observed for 0.25 ML Ag on the Si(1 1 1)7 × 7 surface. These findings suggest that Ag atoms replace the H atoms of the Si(1 1 1)1 × 1–H surface and form direct Ag–Si bonds. Contrary to the widely accepted view that there is no chemical interaction between Ag particles and the H-passivated Si surface, these results are in good agreement with recent first-principles calculations.     

Single-sided mobile NMR apparatus using the transverse flux of a single permanent magnet

This study presents a simple design for a mobile, single-sided nuclear magnetic resonance (NMR) apparatus which uses the magnetic flux parallel to the magnetization direction of a single, disc-shaped permanent magnet polarized in radial direction. The stray magnetic field above the magnet is approximately parallel to the magnetization direction of the magnet and is utilized as the B₀ magnetic field of the apparatus. The apparatus weighs 1.8 kg, has a compact structure and can be held in one's palm. The apparatus generates a B₀ field strength of about 0.279 T at the center of apparatus surface and can acquire a clear Hahn echo signal of a pencil eraser block lying on the RF coil in one shot. Moreover, a strong static magnetic field gradient exists in the direction perpendicular to the apparatus surface. The strength of the static magnetic field gradient near the center of the apparatus surface is about 10.2 T/m; one-dimensional imaging of thin objects and liquid self-diffusion coefficient measurements can be performed therein. The available spatial resolution of the one-dimensional imaging experiments using a 5×5 mm horizontal sample area is about 200 μm. Several nondestructive inspection applications of the apparatus, including distinguishing between polyethylene grains of different densities, characterizing epoxy putties of distinct set times and evaluating the fat content percentages of milk powders, are also demonstrated. Compared with many previously published designs, the proposed design bears a simple structure and generates a B₀ magnetic field parallel to the apparatus surface, simplifying apparatus construction and simultaneously rendering the selection of the radiofrequency coil relatively flexible.     

A method for automatic identification of water and fat images from a symmetrically sampled dual-echo Dixon technique

Sampling water and fat signals symmetrically (i.e., at 0° and 180° relative phase angles) in a dual-echo Dixon technique offers high intrinsic tolerance to phase fluctuations in postprocessing and maximum signal-to-noise performance for the separated water and fat images. However, identification of which image is water and which image is fat after their separation is not possible based on the phase information alone. In this work, we proposed a semiempirical automatic image identification method that is based on the intrinsic asymmetry between the water and fat chemical shift spectra. Specifically, the approximately bimodal feature of the fat spectra and the observation that most in vivo tissues are either predominantly water or predominantly fat are used to construct a spectrum-based algorithm. Additional refinement is accomplished by considering the spatial distribution of the tissues that may have a coexistence of water and fat. The final improved algorithm was tested on a total of 131 three-dimensional patient datasets collected from different scanners and found to yield correct water and fat identification in all datasets.     

Effective potential for highly relativistic neutrinos in a weakly magnetized medium and their oscillation

We have calculated the effective potential experienced by highly relativistic neutrinos in a weakly magnetized electron–positron plasma, where a momentum-dependent finite-width correction to the propagator of W is considered to account for the threshold effect. Magnetars are believed to be sources of TeV–PeV neutrinos which are produced due to photomeson and proton–proton interactions in their atmosphere. We have studied the resonant-oscillation process ν _e ↔ ν _μ,τ of the highly relativistic neutrinos in the atmosphere of SGR 1806-20, which is a magnetar. It is shown that, for high-energy neutrinos propagating within the magnetar atmosphere, the resonance condition can never be satisfied. On the other hand, if GeV neutrinos are produced deep inside the magnetar atmosphere, where the temperature is about 50 keV or more, then these neutrinos can undergo resonant oscillation.     

Pressure dependence of the electric field gradient and knight shift tensors of single crystal gallium

Nuclear pure quadrupole resonance has been observed in single crystal gallium as a function of hydrostatic pressure up to 7 kbar at temperatures of 77, 198 and 273 K. The resonance frequency v_Q increases linearly with pressure and the slope ($\text{δv}{}_{\mathrm{O}}\text{δP}$)_T is 13.7, 15.5 and 16.3 Hz/bar at 77, 198 and 273 K respectively. The asymmetry parameter decreases nonlinearly with pressure. Using compressibility and thermal expansion data, the volume dependence of the major principle component of the electric field gradient was deduced. The principal components K_x, K_y and K_z of the Knight shift tensor have been measured as a function of pressure to 6 kbar at 77 K. The isotropic and anisotropic components of the Knight shift were deduced as a function of pressure, and K_iso is found to vary with volume as V^{4.95 ± 0.80}.     

Real‐Time Measurement of the Size Distribution of Diesel Exhaust Particles using a Portable 4‐stage Electrical Low Pressure Impactor

For this study, a 4 stage electrical low pressure impactor was designed to measure the real‐time size distribution of diesel particulate matter (DPM). For the performance evaluation, sodium chloride (NaCl) particles and dioctyl sebacate (DOS) particles were used. After evaluating the collection efficiency of each stage of the impactor, the size distributions of test particles were estimated using electrical current data and their inversion algorithm, and this was found to agree with the results obtained by a scanning mobility particle sizer (SMPS). For measurement of DPM, a common‐rail direct injection (CRDI) diesel engine, for engine speeds of 1,200 rpm and 1,500 rpm at 2.7 kgf·m, was used. Therefore, it was found that the size distribution of the DPM could be easily obtained, with the currents measured by the impactor and the data inversion algorithm, in less than 5 seconds. Furthermore, the effective density of the DPM could be obtained using the calculated results and the SMPS data.