Solid-phase microextraction coupled with high-performance liquid chromatography for the determination of phenylurea herbicides in aqueous samples

Solid-phase microextraction coupled with high-performance liquid chromatography was successfully applied to the analysis of nine phenylurea herbicides (metoxuron, monuron, chlorotoluron, isoproturon, monolinuron, metobromuron, buturon, linuron, and chlorbromuron). Polydimethylsiloxane-divinylbenzene (PDMS-DVB, 60 microm) and Carbowax-templated resin (CW-TPR, 50 microm) fibers were selected from four commercial fibers for further study because of their better extraction efficiencies. The parameters of the desorption procedure were studied and optimized. The effects of the properties of analytes and fiber coatings, carryover, duration and temperature of absorption, pH, organic solvent and ionic strength of samples were also investigated. External calibration with an aqueous standard can be used for the analysis of environmental samples (lake water) using either PDMS-DVB or CW-TPR fibers. Good precisions (1.0-5.9%) are achieved for this method, and the detection limits are at the level of 0.5-5.1 ng/ml.     

A novel and efficient approach to highly substituted indolizines via 5-endo-trig iodocyclization

A new approach to indolizines has been developed using a 5-endo-trig iodocyclization of allylic esters followed by isomerization and dehydroiodination facilitated by triethylamine at rt. This mild procedure enabled us to synthesize a number of highly substituted indolizines in good yields.     

Facile generation of platinum(IV) compounds with mixed labile moieties. Hydrogen peroxide oxidation of platinum(II) to platinum(IV) compounds

Hydrogen peroxide oxidation of platinum(II) compounds containing labile groups such as Cl, OH, and alkene moieties has been carried out and the products characterized. The reactions of [Pt^II (X)₂ (N–N)] (X = Cl, OH, X₂ = isopropylidenemalorate (ipm); N–N 2,2-dimethyl-1,3-propanediamine [(dmpda), N-isopropyl-1,3-propanediamine (ippda)] with hydrogen peroxide in an appropriate solvent at room temperature affords [Pt^IV (OH)(Y)(X)₂(N–N)] (Y = OH, OCH₃). The crystal structures of [Pt^IV(OH)(OCH₃)(Cl)₂(dmpda)]·2H₂O (P-1 bar, a = 6.339(2) Å , b = 9.861(1) Å, c = 11.561(1) Å, a = 92.078(9)°, β = 104.78(1)°, γ=100.54(1)°, V = 684.3(2) ų, Z = 2R = 0.0503) and [Pt^IV(OH)₂(ipm)(ippda)]·3H₂O (C 2/c, a = 27.275(6) Å, b=6.954(2) Å, c = 22.331(4) Å, β = 118.30(2)°, V = 3729(2) ų, Z = 8, R = 0.0345) have been solved and refined. The local geometry around the platinum(IV) atom approximates to a typical octahedral arrangement with two added groups (OH and OCH₃; OH and OH) in a transposition. The platinum(IV) compounds with potential labile moieties may be important intermediate species for further reactions.     

Modular fluorescence sensors for saccharides

Modular and modular polymer supported fluorescence photoinduced electron transfer (PET) sensors 2 and 3 with two boronic acid receptor units, a pyren-1-yl fluorophore, and hexamethylene linker show selective saccharide binding in aqueous methanolic solution at pH 8.21.     

Synthesis, structure and heterogeneous catalytic activities of Cu-containing polymeric compounds: anion effect and comparison of homogeneous vs. heterogeneous catalytic activity

The structures of new polymeric compounds containing Cu(II) ions and btp (2,6-bis(N'-1,2,4-triazolyl)pyridine) ligands have been determined. The btp ligands bridge Cu(II) ions to form double zigzag chains, [Cu(ClO4)2(btp)2] 3 with perchlorate anions, and form single zigzag chains, [Cu(btp)(H2O)4](SO4).2H2O 4 with sulfate anions. The polymeric compound 3 was found to effectively catalyze the epoxide ring-opening reaction with methanol, while polymeric compound 4 was almost inactive with epoxides under the same conditions. The polymeric compound 3 showed an efficient catalytic activity and regioselective reactivity in the ring opening of epoxides and allowed reuse without a significant loss of activity through three runs with epoxides.     

Two-Photon Excitation of 4'-Hydroxymethyl-4,5',8-Trimethylpsoralen

Abstract— Psoralens are a class of pharmaceutical agents commonly used to treat several cutaneous disorders. When irradiated with a mode-locked titanium: sapphire (Ti: sapphire) laser tuned to 730 nm, an aqueous solution of 4'-hydroxymethyl-4,5',8-trimethylpsoralen (HMT) emits blue light. The emission spectrum is centered at 452 nm and is identical to that obtained by one-photon excitation with UVA excitation, and its magnitude depends quad-ratically on the intensity of laser excitation. These results suggest that two-photon excitation occurs to a potentially photochemically active state. To estimate the two-photon absorption cross section, it was first necessary to measure the emission quantum yield of HMT using 365 nm excitation at room temperature that resulted in a value of 0.045 ± 0.007. The two-photon absorption cross section of HMT at 730 nm is therefore estimated to be 20 ± 10⁻⁵⁰ cm⁴ s (20 Göppert-Mayer). The excited-state photophysics and photochemistry of psoralens suggest potential applications to cutaneous phototherapy in diseases such as psoriasis and dystrophic epidermolysis bullosa.     

Fluoride-facilitated deuterium exchange from DMSO-d6 to polyamide-based cryptands

Multiple deuterium exchange between DMSO-d6 and amide hydrogens in two hexaamido cryptand fluoride receptors has been verified by 19F and 2H NMR and FAB mass spectral studies. Structural results for one of the complexes indicate a tricapped trigonal prism hydrogen bond coordination geometry around an encapsulated fluoride, with hydrogen bonds from fluoride to six amide and three phenyl hydrogens.     

An improved method for constructing a full-length enriched cDNA library using small amounts of total RNA as a starting material

We have developed an improved method for constructing a full-length cDNA library using small quantity of material by modifying the original oligo-capping method. In our devised method, total RNAs are used in sequential oligo-capping steps directly without preliminary mRNA purification. Using this method, we constructed full- length cDNA libraries from 100 mg of total RNA. These libraries contained 8x10(5) to 8x10(6) independent clones with average insert sizes of 2.0 kb. Moreover, the number of full-length cDNAs containing the translation initiation codon ATG in the constructed libraries was estimated to 60-70%. In addition, 54% of the known cDNAs had a longer 5' end than the corresponding genes in the public database. Our results show that the method can be effectively used to construct full-length enriched cDNA libraries, especially, if starting material is limited.     

Poly(dimethylsiloxane) microchip for precolumn reaction and micellar electrokinetic chromatography of biogenic amines

We have demonstrated that precolumn derivatization and capillary electrophoresis separation on a poly(dimethylsiloxane) (PDMS) microchip can be realized as efficient as those on glass microchips. In an optimized condition of micellar electrokinetic chromatography (MEKC), using 25 mM sodium borate buffer (pH 10.0) with 25 mM sodium dodecyl sulfate (SDS) and 5% v/v methanol, the electroosmotic flow in an oxidized PDMS microchip is stabilized within 3% for days. By employing a fluorometric derivatization with o-phthaldialdehyde (OPA) in an optimally designed reaction chamber, four most important biogenic amines occurring in foods, histamine, tyramine, putrescine, and tryptamine, are quantitatively determined in less than 1 min at the levels applicable to real samples. The migration behaviors of anionic OPA-derivatized biogenic amines under the MEKC conditions are analyzed, and it has been found that under our separation conditions, the electrophoretic mobility of the SDS micelles is significantly greater than those of the anions in the aqueous phase. The channel manifold in a PDMS substrate is fabricated using replica molding against a thick photoresist, SU-8, pattern generated by photolithography. The plate with the microchannel pattern is strongly, irreversibly bonded to another PDMS plate by using a new bonding technique, which employs surface oxidation by corona discharge generated from a cheap, handy source, Tesla coil.     

Modeling drop shape on contaminated surfaces or surfaces with physical structures

Surface contaminants are commonly found on films. They get transferred to the surface from incompletely cured silicone liners on the films or owing to migration of additives to the surface from within the film. During the process of ink jet printing (a noncontact printing process), surface contamination affects the shape of the drops (causing the formation of fingers and crescents) and hence image quality. This study uses modeling methods to examine how such surface contamination affects the drops shapes. Subsequently, it models the effect of surface structures (pits) on the drop shape. This study explores how image quality can be controlled in the presence of surface contamination and surface structures.