Simultaneously Enhancing Mechanical Properties and Melt Flow Ability of Polyamide 6 by Blending with a Hyperbranched Polymer

A series of polyamide 6/hyperbranched polymers (PA6/HBP) blends with different HBP contents was prepared by melt processing using a twin-screw extruder. The HBP was synthesized on the basis of pentaerythritol and dimethyl terephthalate according to a one-step method. The melt flow behavior, crystallization behavior, morphology, and mechanical properties of the PA6/HBP blends were investigated. The results showed that the melt flow index of the blends was greatly improved by a small amount of HBP. The yield strength, tensile modulus, Izod impact strength, and flexural strength of samples were simultaneously enhanced from 54.6 MPa, 0.5 GPa, 3.8 kJ/m², 56.9 MPa for pure PA6 to 61.1 MPa, 0.7 GPa, 5.3 kJ/m², 67.1 MPa for PA6 blends with 2.0 wt% HBP, respectively. The PA6/HBP blends showed the higher content of α-form crystal and a higher degree of crystallinity than those of pure PA6.     

Vibrational Spectroscopic Investigation and Theoretical Calculations of (E)-3-Phenyl-N-[4-(Phenyl-Amino) Quinazoline-7-yl] Acrylamide

ABSTRACT

Optimized geometrical structure and harmonic vibration frequencies of prior synthesized (E)-3-phenyl-N-[4-(phenyl-amino) quinazoline-7-yl] acrylamide were computed by ab initio HF and DFT/B3LYP methods using both 6-31G* and 6-311G** basis sets and the Moller–Plesset second-order perturbation (MP2) method merely at the 6-31G* level. The infrared (IR) spectrum of the title compound has been measured in the range of 400–4000 cm^?1. Complete vibrational assignments of the IR spectra were proposed. Moreover, the calculated wavenumbers of the title compound were compared with the experimental data. The correlation analyses indicate that good linearity relationships exist between the scaled theoretical vibration frequencies and the experimental values. Additionally, the atoms in molecules (AIM) method was applied to explore the possible intramolecular interactions in the title compound.     

Modified Spectral Neugebauer Model for Printer Characterization

Spectral Neugebauer model is widely used for spectral reflectance prediction during printer characterization. However, several factors reduce the predication precision. Thus, an improved cellular Yule-Nielson spectral Neugebauer (CYNSN) model is proposed, which modifies the traditional spectral Neugebauer model in three main aspects: (1) First, in order to adjust the nonlinearities between the predicated and measured spectral reflectance, an iteratively calculated Yule-Nielson exponent is added to the reflectance values within the Neugebauer equations. (2) Second, the quantity of Neugebauer primaries is increased by dividing the CMY colorant space into 4³ uniform cellular subdomains. (3) Third, the mapping functions are developed to map the area coverages' theoretical values to their effective values within the subdomains, and the mapped values highly improve the matching degree of the predicated and measured reflectance values. In the experiment, four related spectral Neugebauer models are employed during printer characterization, which are the traditional spectral Neugebauer model, Yule-Nielson spectral Neugebauer (YNSN) model, traditional CYNSN model, and the modified CYNSN model, respectively. And the experimental results show the modified CYNSN model yields a significant improvement over the other spectral Neugebauer models, by comparing the characterization errors in the form of colorimetry and spectroscopy.     

A Modified Technique for the Preparation of SO2 from Sulphates and Sulphides for Sulphur Isotope Analyses

Abstract

A modified technique for the conversion of sulphates and sulphides to SO₂ with the mixture of V₂O₅—SiO₂ for sulphur isotopic analyses is described. This technique is more suitable for routine analysis of large number of samples. Modification of the reaction vessel and using manifold inlet system allows to analyse up to 24 samples every day. The modified technique assures the complete yield of SO₂, consistent oxygen isotope composition of the SO₂ gas and reproducibility of δ³⁴S measurements being within 0.10‰. It is observed, however, oxygen in SO₂ produced from sulphides differs in δ¹⁸O with respect to that produced from sulphates.     

Addition of multiwalled carbon nanotube and graphene nanosheet in cobalt oxide film for enhancement of capacitance in electrochemical capacitors

In order to enhance the capacitance of electrochemical capacitors, multiwalled carbon nanotubes (MWCNTs) and graphene nanosheets (GNS) were added to cobalt oxide (Co₃O₄) paste. The composite film based on Co₃O₄/MWCNT/GNS (95:4:1 wt%) exhibited a capacitance of 294 F/g while the capacitance of Co₃O₄/MWCNT (95:5 wt%) and pure Co₃O₄ film is 205 and 163 F/g, respectively. The enhanced capacitance of Co₃O₄/MWCNT/GNS composite film was attributed to the electrochemical contributions of the Co₃O₄ nanoparticle attached to the GNS as well as their significantly increased specific surface areas by MWCNTs. Furthermore, the composite films showed faradaic redox capacitive behavior to double-layer capacitive behavior due to the different nanostructures of the composites.     

Influence of SiNx:H film properties according to gas mixture ratios for crystalline silicon solar cells

The Hydrogenated silicon nitride (SiN_x:H) using plasma enhanced chemical vapor deposition is widely used in photovoltaic industry as an antireflection coating and passivation layer. In the high temperature firing process, the SiN_x:H film should not change the properties for its use as high quality surface layer in crystalline silicon solar cells. For optimizing surface layer in crystalline silicon solar cells, by varying gas mixture ratios (SiH₄ + NH₃ + N₂, SiH₄ + NH₃, SiH₄ + N₂), the hydrogenated silicon nitride films were analyzed for its antireflection and surface passivation (electrical and chemical) properties. The film deposited with the gas mixture of SiH₄ + NH₃ + N₂ showed the best properties in before and after firing process conditions.The single crystalline silicon solar cells fabricated according to optimized gas mixture condition (SiH₄ + NH₃ + N₂) on large area substrate of size 156 mm × 156 mm (Pseudo square) was found to have the conversion efficiency as high as 17.2%. The reason for the high efficiency using SiH₄ + NH₃ + N₂ is because of the good optical transmittance and passivation properties. Optimized hydrogenated silicon nitride surface layer and high efficiency crystalline silicon solar cells fabrication sequence has also been explained in this study.     

Temperature Sensitivity Control and Mechanical Stress Effect of Boron-Doped Long-Period Fiber Gratings

We will present in this work the quantitative analysis of the relationship between the doping concentrations of GeO 2 and B 2 O 3 in the core and cladding regions and the temperature sensitivity of the resonance wavelength shift in long-period fiber gratings (LPFGs). Based on this analysis, the temperature sensitivity was suppressed and enhanced to 0.002 nm/C and 0.28 nm/C, respectively. We will also discuss the effect of the residual mechanical stress on the optical and mechanical properties of LPFGs. In particular, we will present the measurement results of the dependence of the refractive index change and mechanical strength on the residual mechanical stress in the boron-doped fibers with depressed clad and matched clad.     

Absorption intensities for the 4-0 through 7-0 overtone bands of HCl

We have measured the absorption intesities for a number of rotation-vibration lines in the 4-0 through 7-0 overtone bands of HCl utilizing a Fourier transform spectrometer and a 409.6 m path length White cell. Individual line strengths, band strengths, dipole matrix elements, and Herman-Wallis factors are presented.     

Asymptotic Error Expansion for the Nystrom Method of Nonlinear Volterra Integral Equation of the Second Kind

1.IntroductionConsiderthenonlinearVolterraintegraJequationofthesecondkindHere,u(x)isanunknownfunction,f(x)andK(x,t,u)aregivencontinuousfunctionsdefined,respectively,on[a,b1andD={(x,t,u):aSx5b,aSt5x)-oc相似文献   

矩形域上散乱数据多元最优插值的误差估计及其超收敛性（Ⅰ）──带连续边界条件

本文我们讨论了矩形域上带连续边界条件的一类多元散乱数据最优插值。给出了某些情形插值的误差估计，误差估计表明在某些点上还具有超收敛性。