光滑粒子流体动力学方法固壁处理的一种新型排斥力模型

与传统网格法相比, 光滑粒子流体动力学方法不能直接施加壁面边界条件, 这就限制了该方法在工程中的应用.为此, 本文基于Galerkin加权余量法并结合传统排斥力方法, 推导出一种新的排斥力公式来施加壁面边界条件.该方法不含未知参数, 能在不减小边界粒子尺寸的情形下有效地防止流体粒子穿透壁面, 同时可避免邻近边界的流体粒子的速度及压力振荡. 分别通过静止液柱算例、液柱坍塌算例、容器中液体静止算例及溃坝算 例来验证本文方法的有效性, 并与传统边界处理方法进行对比, 结果表明: 本文方法克服了传统方法存在的缺陷, 是一种有效的固壁边界处理方法. 关键词： 光滑粒子流体动力学法 固壁边界 排斥力 加权余量法     

Tomatidine-stimulated maturation of human embryonic stem cell-derived cardiomyocytes for modeling mitochondrial dysfunction

Human embryonic stem cell-derived cardiomyocytes (hESC-CMs) have been reported to exhibit immature embryonic or fetal cardiomyocyte-like phenotypes. To enhance the maturation of hESC-CMs, we identified a natural steroidal alkaloid, tomatidine, as a new substance that stimulates the maturation of hESC-CMs. Treatment of human embryonic stem cells with tomatidine during cardiomyocyte differentiation stimulated the expression of several cardiomyocyte-specific markers and increased the density of T-tubules. Furthermore, tomatidine treatment augmented the number and size of mitochondria and enhanced the formation of mitochondrial lamellar cristae. Tomatidine treatment stimulated mitochondrial functions, including mitochondrial membrane potential, oxidative phosphorylation, and ATP production, in hESC-CMs. Tomatidine-treated hESC-CMs were more sensitive to doxorubicin-induced cardiotoxicity than the control cells. In conclusion, the present study suggests that tomatidine promotes the differentiation of stem cells to adult cardiomyocytes by accelerating mitochondrial biogenesis and maturation and that tomatidine-treated mature hESC-CMs can be used for cardiotoxicity screening and cardiac disease modeling.Subject terms: Heart failure, Embryonic stem cells, Stem-cell differentiation     

In Vitro–In Vivo Correlation of Tianeptine Sodium Sustained-Release Dual-Layer Tablets

Tianeptine tablets are currently marketed to be designed for immediate-release tablets. The tianeptine has a short half-life, making it difficult to design for sustained-release tablets and achieve bioequivalence with the tianeptine immediate-release tablet (Stablon^®). We established the in vitro–in vivo correlation (IVIVC) of three formulations of tianeptine sustained-release tablets according to their granule size. To evaluate sustained drug release, in vitro tests were performed in pH 1.2 media for 24 h. In vivo pharmacokinetic analysis was performed following oral administration of reference drug and test drug to beagle dogs. The dissolution profile revealed delayed release as the size of the granules increased. The dissolution results were confirmed in pharmacokinetic analysis, showing that the half-life was delayed as granule size increased. The final formulation and reference drug showed an equivalent area under the curve (AUC). Through this, IVIVC was established according to the size of the tianeptine sodium granules, which is the purpose of this study, and was used to predict in vivo pharmacokinetics from the formulation composition. This approach may be useful for determining optimal formulation compositions to achieve the desired pharmacokinetics when developing new formulations.     

Bioavailability Enhancement of Cepharanthine via Pulmonary Administration in Rats and Its Therapeutic Potential for Pulmonary Fibrosis Associated with COVID-19 Infection

Cepharanthine (CEP) has excellent anti-SARS-CoV-2 properties, indicating its favorable potential for COVID-19 treatment. However, its application is challenged by its poor dissolubility and oral bioavailability. The present study aimed to improve the bioavailability of CEP by optimizing its solubility and through a pulmonary delivery method, which improved its bioavailability by five times when compared to that through the oral delivery method (68.07% vs. 13.15%). An ultra-performance liquid chromatography tandem-mass spectrometry (UPLC-MS/MS) method for quantification of CEP in rat plasma was developed and validated to support the bioavailability and pharmacokinetic studies. In addition, pulmonary fibrosis was recognized as a sequela of COVID-19 infection, warranting further evaluation of the therapeutic potential of CEP on a rat lung fibrosis model. The antifibrotic effect was assessed by analysis of lung index and histopathological examination, detection of transforming growth factor (TGF)-β1, interleukin-6 (IL-6), α-smooth muscle actin (α-SMA), and hydroxyproline level in serum or lung tissues. Our data demonstrated that CEP could significantly alleviate bleomycin (BLM)-induced collagen accumulation and inflammation, thereby exerting protective effects against pulmonary fibrosis. Our results provide evidence supporting the hypothesis that pulmonary delivery CEP may be a promising therapy for pulmonary fibrosis associated with COVID-19 infection.     

Improvement of Biological Effects of Root-Filling Materials for Primary Teeth by Incorporating Sodium Iodide

Therapeutic iodoform (CHI₃) is commonly used as a root-filling material for primary teeth; however, the side effects of iodoform-containing materials, including early root resorption, have been reported. To overcome this problem, a water-soluble iodide (NaI)-incorporated root-filling material was developed. Calcium hydroxide, silicone oil, and NaI were incorporated in different weight proportions (30:30:X), and the resulting material was denoted DX (D5~D30), indicating the NaI content. As a control, iodoform instead of NaI was incorporated at a ratio of 30:30:30, and the material was denoted I30. The physicochemical (flow, film thickness, radiopacity, viscosity, water absorption, solubility, and ion releases) and biological (cytotoxicity, TRAP, ARS, and analysis of osteoclastic markers) properties were determined. The amount of iodine, sodium, and calcium ion releases and the pH were higher in D30 than I30, and the highest level of unknown extracted molecules was detected in I30. In the cell viability test, all groups except 100% D30 showed no cytotoxicity. In the 50% nontoxic extract, D30 showed decreased osteoclast formation compared with I30. In summary, NaI-incorporated materials showed adequate physicochemical properties and low osteoclast formation compared to their iodoform-counterpart. Thus, NaI-incorporated materials may be used as a substitute for iodoform-counterparts in root-filling materials after further (pre)clinical investigation.     

Impact of the Acetaldehyde-Mediated Condensation on the Phenolic Composition and Antioxidant Activity of Vitis vinifera L. Cv. Merlot Wine

Acetaldehyde is a critical reactant on modifying the phenolic profile during red wine aging, suggesting that the acetaldehyde-mediated condensation can be responsible for the variation of antioxidant activity during the aging of this beverage. The present study employs exogenous acetaldehyde at six levels of treatment (7.86 ± 0.10–259.02 ± 4.95 mg/L) before the bottle aging of Merlot wines to encourage phenolic modification. Acetaldehyde and antioxidant activity of wine were evaluated at 0, 15, 30, 45, 60 and 75 days of storage, while monomeric and polymeric phenolics were analyzed at 0, 30 and 75 days of storage. The loss of acetaldehyde was fitted to a first-order reaction model, the rate constant (k) demonstrated that different chemical reaction happened in wines containing a different initial acetaldehyde. The disappearance of monomeric phenolics and the formation of polymeric phenolics induced by acetaldehyde could be divided into two phases, the antioxidant activity of wine did not alter significantly in the first phase, although most monomeric phenolics vanished, but the second phase would dramatically reduce the antioxidant activity of wine. Furthermore, a higher level of acetaldehyde could shorten the reaction time of the first phase. These results indicate that careful vinification handling aiming at controlling the acetaldehyde allows one to maintain prolonged biological activity during wine aging.     

2(1/2)维等离子体粒子模拟分布式并行程序设计

设计了两种粒子模拟的并行算法,并对其进行了比较,基于消息传递环境开发2(1/2)维粒子模拟并行程序,测试并分析了并行性能.粒子模拟算法中,给出了一个初始化粒子三维Maxwell速度分布的算法,并对常用的电磁场的Lindman吸收边界作了推广.最后对激光钻孔问题作了粒子模拟计算,验证了该并行程序.     

（Ti,Al）N薄膜光学性能的研究

研究了（Ｔｉ，Ａｌ）薄膜的光学特性，对其反射和透射光谱作了仔细分析。运用Ｈａｄｌｅｙ方程，算出一定成分（Ｔｉ，Ａｌ）Ｎ膜的折射率ｎ，消光系数ｋ随波长的变化关系。又根据透射曲线，计算出了（Ｔｉ，Ａｌ）Ｎ膜的光隙能。     

用于POF的高性能共振腔发光二极管

提出用AlGaAs材料为n型下DBR,AlGaInP材料为p型上DBR,GaInP/AlGaInP多量子阱为有源区来制备650nm波长的共振腔发光二极管（RCLED）.用传输矩阵法对器件的结构进行了理论设计,并制备了RCLED和普通LED两种结构.测试结果表明,RCLED有更高的发光效率,是普通LED的近1.3倍,当注入电流从3mA增加到30mA时,RCLED的峰值波长只变化了1nm,而普通LED的波长则变化了7nm,且RCLED的光谱半宽窄,远场发散角小. 关键词： 发光二极管 共振腔 金属有机物化学气相淀积     

A study on radial directional natural frequency and damping ratio in a vehicle tire

The measurement of radial directional natural frequency and damping ratio in a vehicle tire has been studied. Natural frequencies and damping ratios in the radial direction of various tires, from passenger car tires to truck bus tires, are reported. The radial direction modal parameters of tires subjected to different levels of inflation pressure, have been determined by using a frequency response function method. To obtain the theoretical natural frequency and mode shape, the plane vibration of a tire has been modeled as though it were that of a circular beam. By using the Tielking method that is based on Hamilton’s principle, theoretical results have been determined by considering the rotational velocity, tangential and radial stiffness, radial directional velocity and tension force which is due to tire inflation pressure. The results show that experimental conditions can be considered as the parameters that shift the natural frequency and damping ratio.