Study on the flow resistance of the dispersion system of deformable preformed particle gel in porous media using LBM-DEM-IMB method

After being injected into the porous media, the dispersion system of preformed particle gel (PPG) tends to enter high permeability regions and block water channeling passages, which forces the subsequent water to turn to the low permeability regions and thus increases sweep efficiency and enhances oil recovery. However, it is still unclear about the influence factors and the mechanisms how PPG increases water flow resistance, which limits the application of PPG in more oilfields. Therefore, the paper combines the lattice Boltzmann method (LBM), the discrete element method (DEM) and the improved immersed moving boundary (IMB) method to simulate the migration of deformable PPG in porous media. On the basis, the paper quantitatively analyzes the variation law of displacement pressure across the porous media and discusses the influence factors such as the PPG diameter, elasticity modulus and the number concentration. Results indicate that, because of the friction and retention of PPG in pore-throat, the displacement pressure across the porous media during PPG flooding is much higher than that during water flooding. In other words, the existence of PPG increases the flow resistance of injected water. Besides, the displacement pressure is always fluctuant resulting from the continuous process of PPG migration, retention, deformation and remigration. Influence factor analysis shows that the incremental value and fluctuation degree of flow resistance increase with the PPG diameter, elasticity modulus and the number concentration. The study not only provides useful reference for future PPG flooding, but also benefits the development of deformable particle flow theory.     

SYNTHESIS OF CeO2 NANOPARTICLES IN W/ O MICROEMULSION

The phase composition and properties of microemulsion system of Titron N-101 / n-pentanol/ n-octane/ water (ammonia solution) were studied. CeO₂ nanopaticles were prepared by the reaction of cerous nitrate.     

Adsorptive removal of nitrogen-containing compounds from fuel by metal-organic frameworks

The adsorptive denitrogenation from fuels over three metal-organic frameworks(MIL-96(Al),MIL-53(Al)and MIL-101(Cr))was studied by batch adsorption experiments.Four nitrogen-containing compounds(NCCs)pyridine,pyrrole,quinoline and indole were used as model NCCs in fuels to study the adsorption mechanism.The physicochemical properties of the adsorbents were characterized by XRD,N2physical adsorption,FT-IR spectrum and Hammett indicator method.The metal-organic frameworks(MOFs),especially the MIL-101(Cr)containing Lewis acid sites as well as high specific surface area,can adsorb large quantities of NCCs from fuels.In addition,the adsorptive capacity over MIL-101(Cr)will be different for NCCs with different basicity.The stronger basicity of the NCC is,the more it can be absorbed over MIL-101(Cr).Furthermore,pore size and shape also affect the adsorption capacity for a given adsorbate,which can be proved by the adsorption over MIL-53(Al)and MIL-96(Al).The pseudo-second-order kinetic model and Langmuir equation can be used to describe kinetics and thermodynamics of the adsorption process,respectively.Finally,the regeneration of the used adsorbent has been conducted successfully by just washing it with ethanol.     

Graphene with time-dependent spin-orbit coupling: truncated Magnus expansion approach

We analyze the role of an ac-driven Rashba spin-orbit coupling in monolayer graphene including a spin-dependent mass term. Using the Magnus expansion as a semi-analytical approximation scheme a full account of the quasienergie spectrum of spin states is given. We discuss the subtleties arising in correctly applying the Magnus expansion technique in order to determine the quasienergy spectrum. Comparison to the exact numerical solution gives appropriate boundaries to the validity of the Magnus expansion solution.     

Experimental investigation on bit-rate-adaptive software synchronous optical sampling

A tunable optical rail is embedded into the cavity of a nonlinear-polarization-rotation(NPR) mode-locked fiber laser to generate a sampling pulse with different repetition frequencies and realize bit-rate-adaptive software synchronous optical sampling.Two ultrashort pulses(20.26677 and 20.22900 MHz) are derived,and a 100-MHz data signal is sampled twice with these pulses based on sum-frequency generation(SFG) in periodically poled lithium niobate(PPLN).The eye diagram is successfully recovered,and an estimated bit rate of 102.22 MHz is derived.This method is feasible for bit rates ranging from 200 MHz to 1 GHz,with <3% relative error.     

High-performance Cu/ZnO/Al2O3 catalysts for methanol steam reforming with enhanced Cu-ZnO synergy effect via magnesium assisted strategy

Methanol steam reforming (MSR) is an attractive approach to produce hydrogen for fuel cells.Due to the limited catalyst loading volume and frequent start-ups an...     

Size-refinement enhanced flexibility and electrochemical performance of MXene electrodes for flexible waterproof supercapacitors

Increasing mechanical flexibility without sacrificing electrochemical performance of the electrode mate-rial is highly desired in the design of flexible electro...     

A simple and efficient method for the allylation of heteroarenes catalyzed by PdCl2

The PdCl₂-catalyzed allylation of heteroarenes is presented. Various heteroarenes including O-, N-, and S-based ones were allylated efficiently with a rich range of allylic acetates in the presence of only 2 mol % of PdCl₂, without the need of bases/acids, additives, and external supporting ligands. In addition, the reactions were carried out under mild and simple conditions just by stirring the two reactants and catalyst in CH₂Cl₂ at 60 °C. Moreover, the by-product produced was non-toxic acetic acid. Thus, the method presented in this work provides a general, clean, and operationally simple approach for the functionalization of heteroarenes. Finally, a preliminary mechanistic study suggested that the Pd(II) may be reduced in situ by the heteroarenes to Pd(0), which serves as the active metal center to catalyze the following allylations of heteroarenes via a Tsuji–Trost pathway.     

Polystyrene-bound diethanolamine based ionic liquids for chemical fixation of CO2

Polystyrene-bound diethanolamine based ionic liquids (PS-DHEEAB and PS-THEAB) were synthesized and applied for the chemical fixation of CO₂ into cyclic carbonates without any additional co-catalyst and solvent. The effect of the catalysts with different number of hydroxyl group in the cation of the IL on the reaction was systematically investigated. Highest activity and selectivity were achieved in the presence of polystyrene supported diethanolamine ethyl bromide (PS-DHEEAB) in comparison with other catalysts employed. The catalyst was tough in stability and also found to be extended to a variety of terminal epoxides and aziridines. The relationship between high catalytic reactivity and the –OH functional groups was proposed.     

An efficient approach for total synthesis of aminopropyl functionalized ganglioside GM1b

A highly efficient protocol for the synthesis of aminopropyl functionalized ganglioside GM1b has been described. The full protected ganglioside GM1b was obtained in 71% yield within 5 h. The key feature of the synthetic approach was the use of sialic acid donor that was with a C-5 trichloroacetamide moiety and with a dibenzyl phosphite residue as leaving group at the anomeric carbon. The sialyl donor gave high yields and excellent α-anomeric selectivities with a wide variety of glycosyl acceptors ranging from C-3 or C-6 hydroxyls of galactoside to C-6 hydroxyl of glucosaminoside by using TMSOTf as catalyst in a mixture solution of acetonitrile and methylene chloride.