Synthesis of 5-(4,6-dimethyl-2-pyrimidinyl)-1,3,4-oxadiazole-2-thione and its alkylation,aminomethylation, and acylation

The reaction of the hydrazide of 4,6-dimethyl-2-pyrimidinecarboxylic acid with potassium ethylxnthate gave 5-(4,6-dimethyl-2-pyrimidinyl)-1,3,4-oxadiazole-2-thione. The alkylation of this product in an alkaline medium proceeds at the sulfur atom, while the aminomethylation and acylation proceed at the nitrogen atom. The major criterion for the structure of the S- and N-derivatives is the chemical shift of C₍₂₎ in the 1,3,4-oxadiazole ring in the ¹³C NMR spectra.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 5, pp. 700–705, May, 1993.     

镓(Ⅲ)-茜素红体系的吸附伏安法

本文对镓(Ⅲ)与茜素红络合物在悬汞电极上的吸附伏安法作了研究,确定了电极过程.在HAc-NH_4Ac(pH4.06)缓冲溶液中茜素红存在下,用1.5阶微分吸附伏安法测定镓,其线性范围是1×10~(-10)～1×10~(-7)mol/L,其检测限为1×10~(-10)mol/L,并用此法测定了中草药中的痕量镓.     

Einige analytische Eigenschaften von 1,3-Dimethyl-4,5-diaminouracil

Zusammenfassung 1,3-Dimethyl-4,5-diaminouracil (DAL) hat sich als sehr empfindliches Reagens zum selektiven Nachweis von Co²⁺-Ionen im stark alkalischen Medium einer Phosphatpufferlösung (p_H=11,20) erwiesen. Es wurden vier Additionsverbindungen von DAL mit den Zentralatomen Cd(II), Pd(II), Ni(II) und Co(II) im Verhältnis Me DAL=1 2 hergestellt. Spektrophotometrische Untersuchungen weisen darauf hin, daß bei p_H 6 bis 7 eine Komplexverbindung im Verhältnis CoDAL=12 gebildet wird.

---

Summary 1,3-dimethyl-4,5-diaminouracil (DAL) has been found to be a very sensitive reagent for the selective detection of Co²⁺ ions in strong alkaline medium of a phosphate buffer solution (p_H=11.20). Four addition compounds of DAL with the central atoms Cd(II), Pd(II), Ni(II) and Co(II) with the ratio MeDal=12 have been prepared. Spectrophotometric studies indicate that at p_H=6–7, complex compound is produced with the ratio CoDAL=12.

     

Heat capacity and heat content of BiNb<Subscript>5</Subscript>O<Subscript>14</Subscript>

The heat capacity and the heat content of bismuth niobate BiNb₅O₁₄ were measured by the relaxation time method, DSC and drop method, respectively. The temperature dependence of heat capacity in the form C _pm=455.84+0.06016T–7.7342·10⁶/T ² (J K^–1 mol^–1) was derived by the least squares method from the experimental data. Furthermore, the standard molar entropy at 298.15 K S _m=397.17 J K^–1 mol^–1 was derived from the low temperature heat capacity measurement.     

Compressed-CO2-assisted patterning of polymers

We report a facile route to pattern polymer surfaces with the aid of compressed CO(2), termed the compressed-CO(2)-assisted imprint method. In this method, compressed CO(2) serves as a plasticizer for polymers (such as poly(methyl methylate) and polystyrene), which leads to a tremendous reduction in the glass transition temperature and viscosity of the polymers. Nylon fabrics and anode aluminum oxide porous membranes are used as molds, respectively, to pattern the softened polymers at relatively low temperatures, resulting in patterns at the scale of micrometers and nanometers on the surface of polymer films. The patterned structures can be tuned by changing CO(2) pressure and temperature in the imprinting process. This method is simple and environmentally benign. It also can be operated at low temperatures, for instance, ambient temperature.     

Determination of rimantadine in pharmaceutical preparations by capillary zone electrophoresis with indirect detection or after derivatization

Summary Rimantadine is synthetic analog of amantadine; both are antiviral agents used for prophylaxis and treatment of influenza A. A capillary zone electrophoretic (CZE) procedure for the determination of rimantadine has been developed. As the direct determination of rimantadine is poorly sensitive because the compound is almost transparent in the UV/Vis range, several indirect methods were studied. Two were found to be the particularly useful: (a) indirect detection using 5 mM 4-methylbenzylamine in 1:4 methanol-water as absorbing background electrolyte, with detection at 210 nm, and (b) derivatization of rimantadine with 1,2-naphthoquinone-4-sulfonic acid in alkaline medium and subsequent determination of the derivative by CZE (40 mM tetraborate, pH 9.2, detection at 280 nm). Uncoated capillary tubing, 44 cm length ×75 μM i.d., was used for both determinations. The detection limits were 0.1 and 2 ppm for methods a and b, respectively. The methods were used to determine rimantadine in pharmaceutical products and for dissolution testing of Flumadin^? tablets.     

Cleavage of the Fe—Fe Bond of （Me2SiSiMe2） [η^5－C5H4Fe（CO）2]2 with Na／Hg and Molecular Structure of the Ring－Opened Complex

The reaction of the rifle cyclic complex (1) with sodium amalgam in THF resulted in the expected cleavage of the Fe-Fe bond to afford his-sodium salt ( Me2SiSiMe2 ) [η^5-C5H4Fe(CO)2]2 (4). The latter was not isolated and was used directly to react with MeI, PhCH2Cl, CH3C(O)Cl, PhC(O)Cl,Cy3SnCl (Cy= cyclohexyl) or Ph3SnCl to afford corresponding ring-opened derivatives (Me2SiSiMe2) [η^5-C5H4Fe(CO)2]2 [5, R=Me; 6, R=PhCH2; 7, R=CH3C(O); 8, R=PhC(O); 9, R = Cy3Sn or 10, R = Ph3Sn ]. The crystal and molecular structures of 10 were determined by X-ray diffraction analysis. The molecule took the desired ant/ conformation around the Si-Si bond. The length of the Si--Si bond is 0.2343(3)nm, which is essentially identical to that in the cyclic structure of 1[0.2346(4) tun]. This result unambiguously demonstrates that the Si--Si bond in the cyclic structure of 1 is not subject to obvious strain.     

Self-assembly of meso-tetrakis(4-N-ethylpyridiniurmyl) porphyrin and tetracarboxyl-phenyl calix[4]arene

Novel dimeric capsules are generated from the noncovalent assembly of 5, 10, 15, 20-tetrakis(4-N-ethylpyridiniurmyl)prophyrin (TEPyP) and tetracarboxyl-phenyl calix[4]arene. The self-assembly system was investigated based on UV-Vis absorption and fluorescent spectra. The factors affecting the interaction process including pH and concentration were examined in detail. The association constants between TEPyP and calix[4]arene were determined by the nonlinear least squares fit. The results showed that the basic medium is favourable to the interaction and electrostatic interaction was determinate in the processes of self-assembly process. The related mechanism was discussed.     

Thermodynamic possibilities and constraints of pure hydrogen production by a chromium,nickel, and manganese-based chemical looping process at lower temperatures

The reduction of chromium, nickel, and manganese oxides by hydrogen, CO, CH₄, and model syngas (mixtures of CO + H₂ or H₂ + CO + CO₂) and oxidation by water vapor has been studied from the thermodynamic and chemical equilibrium point of view. Attention was concentrated not only on the convenient conditions for reduction of the relevant oxides to metals or lower oxides at temperatures in the range 400–1000 K, but also on the possible formation of soot, carbides, and carbonates as precursors for the carbon monoxide and carbon dioxide formation in the steam oxidation step. Reduction of very stable Cr₂O₃ to metallic Cr by hydrogen or CO at temperatures of 400–1000 K is thermodynamically excluded. Reduction of nickel oxide (NiO) and manganese oxide (Mn₃O₄) by hydrogen or CO at such temperatures is feasible. The oxidation of MnO and Ni by steam and simultaneous production of hydrogen at temperatures between 400 and 1000 K is a difficult step from the thermodynamics viewpoint. Assuming the Ni—NiO system, the formation of nickel aluminum spinel could be used to increase the equilibrium hydrogen yield, thus, enabling the hydrogen production via looping redox process. The equilibrium hydrogen yield under the conditions of steam oxidation of the Ni—NiO system is, however, substantially lower than that for the Fe—Fe₃O₄ system. The system comprising nickel ferrite seems to be unsuitable for cyclic redox processes. Under strongly reducing conditions, at high CO concentrations/partial pressures, formation of nickel carbide (Ni₃C) is thermodynamically favored. Pressurized conditions during the reduction step with CO/CO₂ containing gases enhance the formation of soot and carbon-containing compounds such as carbides and/or carbonates.     

Application of nanosized zeolites in methanol conversion processes: A short review

1. Download : Download high-res image (206KB)
2. Download : Download full-size image