Hydration of phosphate and borate glasses in an autoclave

Kinetics of hydration of CaO---Al₂O₃---P₂O₅ and Na₂O---CaO---B₂O₃---Al₂O₃ glasses in an autoclave at high temperatures and high pressures has been investigated. The hydration of the phosphate glasses may occur as a result of hydrolysis of glass constituents to form orthophosphate crystals. Cabal glasses which do not contain any alkali oxides have shown a quite high resistance to water. Substitution of sodium for calcium deteriorates the chemical durability of Cabal glasses.     

Electrical conductivities of mixed cation glasses

The electrical conductivities of (1−x) Li₂O · x BaO · 2 SiO₂, (1−x) Na₂O · x MgO ·2 SiO₂, (1−x) Na₂O · x CaO · SiO₂ and (1−x) Na₂O · x BaO · 2SiO₂ glasses were measured at temperature ranging from room temperature to 450°C. The transport numbers for Na⁺ ion in (1−x) Na₂O · x BaO · 2 SiO₂ glasses were measured. It was found that the alkali ion carried a significant part of the current in these glasses except one that had no alkali ions, and the conductivity decreased markedly as the alkali oxide was substituted by an alkaline earth oxide. The results of conductivity measurements combined with the data hitherto reported on mixed alkali glasses led to the proposal that the so-called mixed alkali effect could be explained on the basis of the independent path model in which it is assumed that cations can move only through vacant sites left by those of the same type.     

Preparation of apatite-type-silicate-supported precious metal catalysts for selective catalytic reduction of NOx

Apatite-type silicate supported precious metal catalysts were prepared and investigated for their catalytic activity in selective catalytic NO reduction. Single-phase La_9.33Si₆O₂₆ and La_8.33ASi₆O_25.5 (A=Ca, Sr, Ba) were obtained by a sol-gel method. Pd/La_9.33Si₆O₂₆ catalyst exhibited high activity for oxidation of C₃H₆, comparable to Pd/Al₂O₃ catalyst, although the specific surface area of La_9.33Si₆O₂₆ was lower than that of Al₂O₃. In addition, Pt/La_9.33Si₆O₂₆ catalyst exhibited higher activity for selective catalytic reduction of NO than Pt/Al₂O₃ catalyst. Substitution of Ba²⁺ for La³⁺ of La_9.33Si₆O₂₆ led to increased catalytic activity at low temperature.     

Extraordinary circularly polarized luminescence activity exhibited by cesium tetrakis(3-heptafluoro-butylryl-(+)-camphorato) Eu(III) complexes in EtOH and CHCl3 solutions

The largest CPL activity ever measured was observed for cesium tetrakis(3-heptafluoro-butylryl-(+)-camphorato) Eu(III) complexes in EtOH and CHCl3 solutions substantiating the stereospecific formation of chiral Delta-SAPR-(C4) configuration with the aid of Cs+...FC (fluorocarbon) interactions more clearly than the exciton CD spectra.     

Finite creep deformations of thick-walled tubes

As an application of the theory of finite deformations to creep problems, the steady-state creep of pressurized thick-walled tubes is analysed. Constitutive equations of steady-state creep in case of finite deformations are first derived by assuming the Prager-Drucker potential and Norton's law. Closed form solutions are obtained, and compared with the corresponding experiment as well as the analysis disregarding the effect of J₃ and that of infinitesimal deformations. The relation between the present analysis and that of Rimrott, performed by modifying the procedure of infinitesimal deformations, is also discussed.     

Radical polymerization of ortho-(1,3-dioxolan-2-yl)phenyl ethyl fumarate involving intramolecular hydrogen abstraction and ring opening of cyclic acetal

The polymerization of o-(1,3-dioxolan-2-yl)phenyl ethyl fumarate (DOPEF) initiated with dimethyl 2,2′-azobisiso-butyrate (MAIB) was studied kinetically in benzene. The polymerization rate (R_p) at 60°C was given by R_p = k [MAIB]^0.76 [DOPEF]^0.71. The overall activation energy of polymerization was calculated to be 98.3 kJ/mol. The number-average molecular weight of resulting poly(DOPEF) was in the range of 1000–3100. ¹H- and ¹³C-NMR spectra of resulting polymers revealed that the radical polymerization of DOPEF proceeds in a complicated manner involving vinyl addition, intramolecular hydrogen abstraction, and further ring opening of the cyclic acetal at higher temperatures. From the copolymerization of DOPEF (M₁) and styrene (St) (M₂) at 60°C, the monomer reactivity ratios were obtained to be r₁ = 0.02 and r₂ = 0.20, the values of which are similar to those of the copolymerization of ethyl o-formylphenyl fumarate and St. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 563–572, 1998     

Interaction of a practical fluoran-based black color former with possible color developers, various acids and magnesium ions, in acetonitrile

For the purpose of improving the visible method of γ-rays detection, detailed conditions with various acids have been examined for the color development of a fluoran-based black color former in acetonitrile. It is suggested that the protons (H⁺), which may be produced from acid generators by γ-ray radiation, can be properly detected by the color development of the black color former containing proper kinds and concentrations of bases. Reversible decolorization through the interaction between Mg²⁺ and polyamines (acyclic and macrocyclic) has been examined in order to reconfirm that the colored zwitterion is produced by the direct chemical interaction with Mg (ClO₄)₂ in the fluoran dye–acetonitrile solution.     

Fine pore mouth structure of molecular sieve carbon with GCMC-assisted supercritical gas adsorption analysis

N₂ adsorption isotherms of molecular sieve carbon were measured at 77 K and 303 K. The Ar adsorption isotherms of molecular sieve carbon samples were also measured at 303 K. The grand canonical Monte Carlo (GCMC) simulation technique was applied to calculate the N₂ and Ar adsorption isotherms at 303 K using the ultramicropore volume determined by H₂O adsorption. The comparative method of experimental and simulated isotherms of supercritical N₂ and Ar at 303 K gave the width of the micropore mouth of the molecular sieve carbon, which can be applied to the ultramicropore width determination for other noncrystalline porous solids.