Immobilization of molecularly imprinted polymer nanoparticles in electrospun poly(vinyl alcohol) nanofibers

We describe the fabrication of polymer nanofibers with entrapped molecularly imprinted polymer (MIP) nanoparticles and study their possible use in a fluorescence-based biosensor application. The MIP was imprinted with the fluorescent amino acid derivative dansyl-L-phenylalanine. Poly(vinyl alcohol) was used as a support for MIP nanoparticles because it is water-soluble and can be spun into very thin fibers. The fibers were characterized by atomic force microscopy and optical microscopy, and fluorescence microscopy was used for the characterization of target binding to the MIP. The fibers show close to 100% recovery upon extraction and rebinding of the target molecule. The selectivity of the system has been demonstrated through competitive binding experiments with nonfluorescent analogues boc-L-phenylalanine and boc-D-phenylalanine.     

Micromechanical cohesion force measurements to determine cyclopentane hydrate interfacial properties

Hydrate aggregation and deposition are critical factors in determining where and when hydrates may plug a deepwater flowline. We present the first direct measurement of structure II (cyclopentane) hydrate cohesive forces in the water, liquid hydrocarbon and gas bulk phases. For fully annealed hydrate particles, gas phase cohesive forces were approximately twice that obtained in a liquid hydrocarbon phase, and approximately six times that obtained in the water phase. Direct measurements show that hydrate cohesion force in a water-continuous bulk may be only the product of solid-solid cohesion. When excess water was present on the hydrate surface, gas phase cohesive forces increased by a factor of three, suggesting the importance of the liquid or quasi-liquid layer (QLL) in determining cohesive force. Hydrate-steel adhesion force measurements show that, when the steel surface is coated with hydrophobic wax, forces decrease up to 96%. As the micromechanical force technique is uniquely capable of measuring hydrate-surface forces with variable contact time, the present work contains significant implications for hydrate applications in flow assurance.     

Reciprocal Response of Human Oral Epithelial Cells to Internalized Silica Nanoparticles

Silica nanoparticles (SiO₂ NPs) are one of the most widely used engineered nanoparticles and can been found in a wide range of consumer products. Despite their massive global production scale, little is known about their potential effects in the context of unintended exposure or ingestion. Using TR146 cells as an in vitro model of the human oral buccal mucosa, the uptake, spatial intracellular distribution, reactive oxygen species (ROS) production, inflammatory response, and cytotoxic effects of commercial SiO₂ NPs are examined. SiO₂ NPs are shown to dock and cross the cellular membrane barrier in a dose–time‐dependent manner. Confocal sectioning reveals translocation of SiO₂ NPs into the cell nucleus after 12 h of exposure. A concentration threshold of more than 500 × 10^?6 m is observed, above which SiO₂ NPs are shown to exert significant oxidative stress with concomitant upregulation of inflammatory genes IL6 and TNFA. Further analysis of the p53 pathway and a series of apoptotic and cell cycle biomarkers reveals intracellular accumulation of SiO₂ NPs exert marginal nanotoxicity. Collectively, this study provides important information regarding the uptake, intracellular distribution, and potential adverse cellular effects of SiO₂ NPs commonly found in consumer products in the human oral epithelium.     

Ligand exchanged photoluminescent gold quantum dots functionalized with leading peptides for nuclear targeting and intracellular imaging

Ligand exchanged gold quantum dots (GQDs) conjugated with cell-penetrating peptides are a new class of photoluminescent probes for nuclear targeting and intracellular imaging.     

Photon transport in thin disordered slabs

We examine using Monte Carlo simulations, photon transport in optically ‘thin’ slabs whose thickness L is only a few times the transport mean free path l*, with particles of different scattering anisotropies. The confined geometry causes an auto-selection of only photons with looping paths to remain within the slab. The results of the Monte Carlo simulations are borne out by our analytical treatment that incorporates directional persistence by the use of the Ornstein-Uhlenbeck process, which interpolates between the short time ballistic and long time diffusive regimes.     

Sensitive determination of hydrazine using poly(phenolphthalein), Au nanoparticles and multiwalled carbon nanotubes modified glassy carbon electrode

This study reports a detailed analysis of an electrode material containing poly(phenolphthalein), carbon nanotubes and gold nanoparticles which shows superior catalytic effect towards to hydrazine oxidation in Britton–Robinson buffer (pH 10.0). Glassy carbon electrode was modified by electropolymerization of phenolphthalein (PP) monomer (poly(PP)/GCE) and the multiwalled carbon nanotubes (MWCNTs) was dropped on the surface. This modified surface was electrodeposited with gold nanoparticles (AuNPs/CNT/poly(PP)/GCE). The fabricated electrode was analysed the determination of hydrazine using cyclic voltammetry, linear sweep voltammetry and amperometry. The peak potential of hydrazine oxidation on bare GCE, poly(PP)/GCE, CNT/GCE, CNT/poly(PP)/GCE, and AuNPs/CNT/poly(PP)/GCE were observed at 596 mV, 342 mV, 320 mV, 313 mV, and 27 mV, respectively. A shift in the overpotential to more negative direction and an enhancement in the peak current indicated that the AuNPs/CNT/poly(PP)/GC electrode presented an efficient electrocatalytic activity toward oxidation of hydrazine. Modified electrodes were characterized with High-resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and electrochemical impedance spectroscopy (EIS). Amperometric current responses in the low hydrazine concentration range of 0.25–13 µM at the AuNPs/CNT/poly(PP)/GCE. The limit of detection (LOD) value was obtained to be 0.083 µM. A modified electrode was applied to naturel samples for hydrazine determination.     

Time-resolved resonance Raman and density functional theory study of hydrogen-bonding effects on the triplet state of p-methoxyacetophenone

Picosecond and nanosecond time-resolved resonance Raman spectroscopy combined with density functional theory calculations have been performed to characterize the structure, dynamics, and hydrogen-bonding effects on the triplet state of the phototrigger model compound p-methoxyacetophenone (MAP) in cyclohexane, MeCN, and 50% H2O/50% MeCN (v:v) mixed solvent. Analogous work has also been done to study the corresponding ground state properties. The ground and triplet states of MAP were both found to be associated strongly with the water solvent molecules in the 50% H2O/50% MeCN solvent system. A hydrogen-bond complex model involving one or two water molecules bonded with the oxygen atoms of the MAP carbonyl and methoxy moieties has been employed to explore the hydrogen-bond interactions and their influence on the geometric and electronic properties for the ground and triplet states of MAP. Among the various hydrogen-bond configurations examined, the carbonyl hydrogen-bond configuration involving one water molecule was calculated to lead to the most stable hydrogen-bond complex for both the ground and the triplet states with the strength of the hydrogen-bond interaction being stronger in the triplet state than the ground state. The increased carbonyl located hydrogen-bond strength in the triplet state results in substantial modification of both the electronic and the structural conformation so that the triplet of the hydrogen-bond complex can be considered as a distinct species from the free MAP triplet state. This provides a framework to interpret the differences observed in the TR3 spectral and triplet lifetime obtained in the neat MeCN solvent (attributed to the free MAP triplet state) and the 50% H2O/50% MeCN solvent (due to the triplet of the hydrogen-bond complex). Temporal evolution at early picosecond times indicates rapid ISC conversion, and subsequent relaxation of the excess energy of the initially formed energetic triplets occurs for both the free MAP and the hydrogen-bond complex. The triplet of the carbonyl hydrogen-bond complex appears to be generated directly from the corresponding ground state complex and it does not dissociate back to the free triplet state within the triplet state lifetime. We briefly discuss the influence of the carbonyl hydrogen-bond effect on the pi pi* triplet reactivity for MAP and closely related compounds.     

Molecular recognition of endocrine disruptors by synthetic and natural 17β-estradiol receptors: a comparative study

A β-estradiol receptor binding mimic was synthesised using molecular imprinting. Bulk polymers and spherical polymer nanoparticles based on methacrylic acid and ethylene glycol dimethacrylate as the functional monomer and crosslinker, respectively, were prepared in acetonitrile. The selectivity was evaluated by radioligand binding assays. The imprinted polymers were very specific to β-estradiol since the control polymers bound virtually none of the radioligand. The bulk polymer was then employed to screen endocrine disrupting chemicals. Structurally related steroids like α-estradiol, estrone and ethynylestradiol showed, respectively, 14.0, 5.0 and 0.7% of relative binding to the β-estradiol polymer, whereas most unrelated chemicals did not bind at all. These results are compared to those obtained with a bioassay using stably transfected yeast cells in culture bearing the human estrogen receptor. The receptor was activated by several estrogen-like chemicals and to a lesser extent by some structurally related chemicals. Figure A molecularly imprinted polymer that was a synthetic receptor for beta-estradiol was used for the screening of endocrine disrupting chemicals that are structurally related or unrelated to beta-estradiol. The results were compared with the recognition of the compounds by the biological estrogen receptor expressed in yeast cells. Related steroids like alpha-estradiol, estrone and ethynylestradiol showed significant binding to the beta-estradiol imprinted polymer, whereas most unrelated chemicals did not bind. The biological receptor was activated by several estrogen-like chemicals, and to a lesser extent by some structurally related chemicals