10-GHz Optical Comb in L-Band Region With Brillouin/Erbium-Doped Fibre Laser

A multiwavelength Brillouin/erbium fibre laser (BEFL) which operates in the long wavelength (L-band) region is demonstrated for potential applications in an L-band wavelength division multiplexing (WDM) communication system. The laser configuration consists of a long erbium-doped fibre to enable L-band amplification where two 3-dB couplers take a portion of the generated BEFL signal and re-inject it into the single mode fibre to seed a cascaded BEFL line in the same direction as the first BEFL line. A stable and strong laser comb of up to five lines with 10-GHz spacing has been obtained with a Brillouin pump (BP) of 9.2 mW and a 980 nm pump of 92 mW. The BEFL has shown a broad tuning range with a tuning characteristic for line #1 which is flat over a range greater than 9.9 nm.     

Acute oral toxicity and brine shrimp lethality of Elaeis guineensis Jacq., (oil palm leaf) methanol extract

Elaeis guineensis (Arecaceae) is widely used in West African traditional medicine for treating various ailments. An evaluation on the toxicity of extracts of this plant is crucial to support the therapeutic claims. The acute oral toxicity and brine shrimp lethality of a methanolic extract of this plant was tested. Oral administration of crude extract at the highest dose of 5,000 mg/kg resulted in no mortalities or evidence of adverse effects, implying that E. guineensis is nontoxic. Normal behavioral pattern, clinical signs and histology of vital organs confirm this evidence. The E. guineensis extracts screened for toxicity against brine shrimp had 50% lethal concentration (LC??) values of more than 1.0 mg/mL (9.00 and 3.87 mg/mL, at 6 and 24 h, respectively), confirming that the extract was not toxic. Maximum mortalities occurred at 100 mg/mL concentration while the least mortalities happened to be at 0.195 mg/mL concentration. The results of both tests confirm that E. guineensis is nontoxic and hence safe for commercial utilization.     

The Electropolymerization of 2,6‐Diaminopyridine and Its Application as Mercury Ion Selective Electrode

A composite graphite (CG) electrode modified with poly(2,6‐diaminopyridine) (PDAP) was used as solid state‐ion selective electrode for determination of mercury. The electrooxidation of monomer 2, 6 diaminopyridine (DAP) onto CG was accomplished from the 30 mM DAP in 5% H₂SO₄ and 0.5 M ZnSO₄. The electrode displayed Nernstian response with slope of 28.4±1 mV decade⁻¹ in concentration range of 1×10⁻⁶ to 1×10⁻¹ M and in solution of pH 3–5. The limit of detection for electrode was 3×10⁻⁸ M with response time of 25 s. The electrode was also suitable as an indicator electrode in the potentiometric titration of Hg²⁺ with iodide.     

Evidence of Nonelectrochemical Shift Reaction on a CO-Tolerant High-Entropy State Pt-Ru Anode Catalyst for Reliable and Efficient Residential Fuel Cell Systems

A randomly mixed monodispersed nanosized Pt-Ru catalyst, an ultimate catalyst for CO oxidation reaction, was prepared by the rapid quenching method. The mechanism of CO oxidation reaction on the Pt-Ru anode catalyst was elucidated by investigating the relation between the rate of CO oxidation reaction and the current density. The rate of CO oxidation reaction increased with an increase in unoccupied sites kinetically formed by hydrogen oxidation reaction, and the rate was independent of anode potential. Results of extended X-ray absorption fine structure spectroscopy showed the combination of N(Pt-Ru)/(N(Pt-Ru) + N(Pt-Pt)) ? M(Ru)/(M(Pt) + M(Ru)) and N(Ru-Pt)/(N(Ru-Pt) + N(Ru-Ru)) ? M(Pt)/(M(Ru) + M(Pt)), where N(Pt-Ru)(N(Ru-Pt)), N(Pt-Pt)(N(Ru-Ru)), M(Pt), and M(Ru) are the coordination numbers from Pt(Ru) to Ru(Pt) and Pt (Ru) to Pt (Ru) and the molar ratios of Pt and Ru, respectively. This indicates that Pt and Ru were mixed with a completely random distribution. A high-entropy state of dispersion of Pt and Ru could be maintained by rapid quenching from a high temperature. It is concluded that a nonelectrochemical shift reaction on a randomly mixed Pt-Ru catalyst is important to enhance the efficiency of residential fuel cell systems under operation conditions.     

Electrophoretic deposited MWCNT composite graphite pencils and its uses to determine hyperin

A simple, fast, and effective method of fabricating electrochemical sensors using composite pencil graphite (CPG) lead modified with carboxylic multiwalled carbon nanotube (c-MWCNT) via electrophoretic deposition (EPD) has been developed. The EPD of c-MWCNT film on the CPG electrode (CPGE) was carried out at a constant applied potential of 25?V and deposition time of 1?min. The electrochemical performances of the modified CPGE, i.e., c-MWCNT/CPGE, in Fe(CN) ₆ ^4?/3? has been studied by cyclic voltammetry and electrochemical impedance spectroscopy (EIS). The c-MWCNT/CPGE has better current density, onset potentials, and charge transfer resistances than the CPGE. The c-MWCNT/CPGE has been successfully used to analyze hyperin in dry fruits of Acanthopanax sessiliflorus.     

In vitro studies of carbon fiber microbiosensor for dopamine neurotransmitter supported by copper-graphene oxide composite

A composite was prepared from copper and graphene oxide (Cu-GO) by in-situ chemical reduction of a mixture containing GO and Cu(II) ions with potassium borohydride. The morphology and structure of the composite were confirmed by various physicochemical techniques. The materials were used in a tyrosinase-based microbiosensor where the enzyme is immobilized in a biocompatible matrix consisting of poly(ortho-phenylene diamine) and Cu-GO. The composite was deposited on the surface of an 8-μm thick carbon fiber microelectrode. The role of each component in the sensing layer was systematically investigated with respect to the analytical performance of the system. In its optimal configuration, the biosensor demonstrated (a) a sensitivity of 6.1?±?3 nA mM^-1 dopamine (DA), (b) a linear response to DA (with a Michaelis-Menten constant of 0.29?±?0.03 mM), (c) good selectivity over ascorbic acid and uric acid, and (d) a high blocking capacity (112.2?±?2 mM) for ascorbic acid.

Environmental Benign Catalysis for Linear Alkylbenzene Synthesis: A Review

In this review, we discuss the recent advances in both of non-zeolitic and zeolitic solid acid catalysts for linear alkylbenzene (LAB) synthesis with special focus on improvements of 2-LAB isomer selectivity and catalyst stability. Effects of post treatment methods particularly dealumination and desilication on the catalytic performance of mordenite in terms of mesoporosity, diffusivity and deactivation mechanism are extensively reviewed. Perspective trends in the development of mesoporous zeolites for LAB synthesis are also presented.     

Open‐Pore Two‐Dimensional MFI Zeolite Nanosheets for the Fabrication of Hydrocarbon‐Isomer‐Selective Membranes on Porous Polymer Supports

Two‐dimensional zeolite nanosheets that do not contain any organic structure‐directing agents were prepared from a multilamellar MFI (ML‐MFI) zeolite. ML‐MFI was first exfoliated by melt compounding and then detemplated by treatment with a mixture of H₂SO₄ and H₂O₂ (piranha solution). The obtained OSDA‐free MFI nanosheets disperse well in water and can be used for coating applications. Deposits made on porous polybenzimidazole (PBI) supports by simple filtration of these suspensions exhibit an n‐butane/isobutane selectivity of 5.4, with an n‐butane permeance of 3.5×10^?7 mol m^?2 s^?1 Pa^?1 (ca. 1000 GPU).