Triple differential cross-sections for the fast electron/positron impact ionization of hydrogen and helium in the Glauber approximation

Triple differential cross-section for electron and positron impact ionization of hydrogen and helium are calculated by using the Glauber approximation along with post-collision interaction effects which are estimated classically. The present results are compared with the recent absolute data of Ehrhardt, Jung and coworkers for the electron impact case. The positron impact case is found to lead to a larger binary to recoil peak maxima ratio (compared to the electron impact case) which further increases when post-collision interaction effects are included.     

Kinetics and mechanism of osmium(VIII)-catalysed and uncatalysed oxidation of aminoalcohols by chloramine-T in alkaline medium

Summary The kinetics of osmium(VIII)-catalysed oxidation of aminoalcohols,viz., 2-aminoethanol, 3-aminopropanol, diethanolamine and triethanolamine, by chloramine-T in alkaline medium have been investigated. The reactions follow a first-order-rate dependence with respect to oxidant. The order in [aminoalcohol] decreases from unity at higher concentrations of aminoalcohols while that in [OH^–] is nearly –1. The oxidation rate is directly proportional to [osmium(VIII)] in primary amino-alcohols, while that is proportional to {k+k [osmium(VIII)]} (where k and k are rate constants) in diethanolamine and triethanolamine. The uncatalysed oxidation of diethanolamine and triethanolamine follows a first-order-rate dependence in each of the oxidant and the sustrate. Suitable mechanisms consistent with the observed kinetic results are proposed.     

Kinetics and mechanism of the ruthenium(III)-catalysed oxidation of aminoalcohols by chloramine-T in perchloric acid

Summary The kinetics of the ruthenium(III) catalysed oxidation of 2-aminoethanol, 3-aminopropanol, diethanolamine and triethanolamine by chloramine-T in HClO₄ medium have been studied. The reactions exhibits first order rate dependence with respect to the oxidant and to the catalyst, and are zeroth order with respect to the substrate. The rate of oxidation is proportional to k[HClO₄]/{k+k'[HClO₄]} where k, k and k' are constants (a mixture of elementary rate constants and equilibrium constants). A suitable mechanism consistent with the observed kinetic data is proposed.     

Determination of Alendronate Sodium by Box-Behnken Statistical Design

Spectrophotometric and LC methods have been developed and validated for the analysis of alendronate sodium in tablet dosage forms. Methods were based on reaction of the primary amino group of alendronate with ninhydrin reagent in methanolic solution of sodium bicarbonate. The condensed product exhibited UV absorption maximum at 569 nm whereas neither the reagents nor the analyte had any UV absorption. A Box-Behnken statistical design was employed to study the effect of independent variables, ninhydrin (X ₁ ), NaHCO₃ (X ₂ ) and drug concentration (X ₃ ) on dependent variable, absorption via spectrophotometer. From the point prediction tool of design software, it was observed that ninhydrin (0.26%) and NaHCO₃ (0.048 mol L^?1) produced maximum absorption. These optimized parameters were then selected for method validation. The methods obeyed Beer’s law over a selected concentration range with good correlation co-efficient (>0.99). The limit of detection and limit of quantification were 4.5 and 13.75 μg mL^?1 by spectroscopy, and 87 and 263 ng mL^?1 by LC, respectively. Accuracy, precision and % recovery were satisfactory for the proposed method. The method was highly feasible and reproducible for determination of alendronate sodium in bulk powder and pharmaceutical dosage form.     

Stability indicating high-performance thin-layer chromatographic determination of gatifloxacin as bulk drug and from polymeric nanoparticles

A simple, sensitive, selective, precise and stability indicating high-performance thin-layer chromatographic method for determination of gatifloxacin both as a bulk drug and from polymeric nanoparticles was developed and validated as per the International Conference on Harmonization (ICH) guidelines. The method employed thin-layer chromatography (TLC) aluminium plates precoated with silica gel 60F-254 as the stationary phase and the mobile phase consisted of n-propanol-methanol-concentrated ammonia solution (25%) (5:1:0.9, v/v/v). This solvent system was found to give compact spots for gatifloxacin (R_f value of 0.60 ± 0.02). Densitometric analysis of gatifloxacin was carried out in the absorbance mode at 292 nm. The linear regression analysis data for the calibration plots showed good linear relationship with r = 0.9953 with respect to peak area in the concentration range of 400-1200 ng spot⁻¹. The mean value (±S.D.) of slope and intercept were 9.66 ± 0.05 and 956.33 ± 27.67, respectively. The method was validated for precision, accuracy, ruggedness and recovery. The limits of detection and quantitation were 2.73 and 8.27 ng spot⁻¹, respectively. Gatifloxacin was subjected to acid and alkali hydrolysis, oxidation, photodegradation and dry heat treatment. The drug undergoes degradation under acidic and basic conditions and upon wet and dry heat treatment. The degraded products were well separated from the pure drug. The statistical analysis proves that the developed method for quantification of gatifloxacin as bulk drug and from polymeric nanoparticles is reproducible and selective. As the method could effectively separate the drug from its degradation products, it can be employed as stability-indicating one.     

Synthesis of tetrahydroxy perhydroaza-azulenes: tandem Johnson-Claisen rearrangement of D-glucose-derived allylic alcohols

The Johnson-Claisen rearrangement of D-glucose-derived allylic alcohols 5a,b, afforded sugar-substituted gamma,delta-unsaturated ester in high yield. Conversion of the ester group to an azidomethyl group, epoxidation of the double bond and hydrogenation gave pyrrolidine ring skeletons 13a and 13b, which were transformed to tetrahydroxy perhydroaza-azulenes 1a and 1b, respectively. Glycosidase inhibitory activity was also evaluated.     

3-Methyl[1,3,4]thiadiazino[2,3-b]quinazolin-6-ones

4H,6H-[1,3,4]Thiadiazino[2,3-b]quinazolin-6-one with a methyl group in position 3 (6a) has been synthesised by the condensation of 3-amino-2-mercapto-3H-quinazolin-4-one (1) with allyl bromide (2) followed by treatment with bromine and subsequent dehydrohalogenation of the brominated product (4) with ethanolic sodium hydroxide. Its isomeric 3-methyl-2H,6H-[1,3,4]thiadiazino[2,3-b]quinazolin-6-one (6b) has also been obtained by condensation of1 and bromoacetone (7) followed by cyclisation of the intermediates (8 or9) with hydrobromic acid or with concentrated sulphuric acid. The structures have been established on the basis of IR and PMR data.

---

3-Methyl[1,3,4]thiadiazino[2,3-b]chinazolin-6-one

Zusammenfassung Zur Synthese von 4H,6H-[1,3,4]thiadiazino[2,3-b]chinazolin-6-on (6a) wurde die Kondensation von 3-Amino-2-mercapto-3H-chinazolin-4-on (1) mit Allylbromid mit nachfolgender Behandlung mit Brom und Dehydrohalogenierung des bromierten Produktes4 mit ethanolischer Natronlauge herangezogen. Das zu6a isomere 2H,6H-Produkt6b wurde ebenfalls durch Kondensation von1 mit Bromaceton und nachfolgender Cyclisierung der Zwischenprodukte8 bzw.9 mit HBr oder H₂SO₄ erhalten. Die Strukturen wurden mittels IR und NMR abgesichert.

     

X-ray Topographic Assessment of Defects in Pure and Substituted Hexaferrite Crystals

Results of X-ray diffraction topography, in reflection and transmission scanning geometry, of flux grown single crystals of substituted and unsubstituted hexaferrites bearing composition SrGa_xIn_yFe_12-(x+y)O₁₉ (where x = 0, 5, 7, 9; y = 0, 0.8, 1.3, 1.0) are presented. Diffraction topographs reveal defects like misoriented grains, dislocations, cavities, inclusions, and the strain patterns in these crystals. The unsubstituted hexaferrites exhibit better perfection when compared to the substituted ones. The study is reported to support the results obtained by chemical etching and fractography, besides yielding additional information covering defects.     

Band structure of palladium hydride by the augmented-plane-wave method

The band structure of palladium hydride (PdH) is calculated using the augmented-plane-wave method. Using these calculations the Fermi energy, Fermi surface, de Haas-van Alphen frequencies, and density of states have been determined. These results are compared with our previous calculations for Pd and with other reported results for PdH.