Temperature-dependent vibrational spectroscopic studies of pure and gold nanoparticles dispersed 4-n-Hexyloxy-4’-cyanobiphenyls

Raman spectra of pure and 2 wt.% gold nanoparticles (GNPs) dispersed liquid crystalline compound 4-n-Hexyloxy-4?- cyanobiphenyls (6OCB) has been recorded as a function of temperature from room temperature (solid crystal) to 80°C (isotropic liquid) in the spectral region of 500–2500 cm^?1. The variation of Raman spectral parameters (peak positions and line width) with temperature is used to explain the changes in molecular alignment and its effect on inter-/intra-molecular interactions at crystal-Nematic (K-N) transition. To understand the change in molecular structure during phase transition and on account of dispersion of gold nanoparticles in pure liquid crystal more precisely, two spectral regions 1000–1500 cm^?1 and 1500–2400 cm^?1 have been selected separately. From the detailed study, it is concluded that increased orientational/vibrational freedom of the molecules as well as delocalisation of electron clouds results in the spectral anomalies at K-N transition. The geometrical structure of 6OCB was optimised using density functional theory (DFT) and theoretical Raman spectra have been obtained for comparison with experimental spectra. The tentative assignment of vibrational modes observed in our region of study was calculated based on potential energy distribution (PED) using vibrational energy distribution analysis (VEDA) calculation.     

Terminal Hydride Species in [FeFe]‐Hydrogenases Are Vibrationally Coupled to the Active Site Environment

A combination of nuclear resonance vibrational spectroscopy (NRVS), FTIR spectroscopy, and DFT calculations was used to observe and characterize Fe?H/D bending modes in CrHydA1 [FeFe]‐hydrogenase Cys‐to‐Ser variant C169S. Mutagenesis of cysteine to serine at position 169 changes the functional group adjacent to the H‐cluster from a ‐SH to ‐OH, thus altering the proton transfer pathway. The catalytic activity of C169S is significantly reduced compared to that of native CrHydA1, presumably owing to less efficient proton transfer to the H‐cluster. This mutation enabled effective capture of a hydride/deuteride intermediate and facilitated direct detection of the Fe?H/D normal modes. We observed a significant shift to higher frequency in an Fe?H bending mode of the C169S variant, as compared to previous findings with reconstituted native and oxadithiolate (ODT)‐substituted CrHydA1. On the basis of DFT calculations, we propose that this shift is caused by the stronger interaction of the ‐OH group of C169S with the bridgehead ‐NH‐ moiety of the active site, as compared to that of the ‐SH group of C169 in the native enzyme.     

Growth of Cyanobacteria: Optimization for Increased Carbohydrate Content

Growths of Lyngbya limnetica and Oscillatoria obscura were investigated at varying pH, light intensity, temperature, and trace element concentration with a view to optimize these parameters for obtaining the maximum carbohydrate content. The maximum growth for both strains was obtained at pH 9.0 and temperature 20 ± 3 °C using a light intensity of 68.0 μmol m^?2 s^?1 with continuous shaking. Growth under the nitrogen starvation condition affected the carbohydrate content more compared to the phosphorus starvation, and maximum concentrations were found as 0.660 and 0.621 g/g of dry biomass for L. limnetica and O. obscura, respectively. Under the optimized nitrogen-rich conditions, the specific growth rates for the two strains were found to be 0.187 and 0.215 day^?1, respectively. The two-stage growth studies under nitrogen-rich (stage I) followed by nitrogen starvation (stage II) conditions were performed, and maximum biomass and carbohydrate productivity were found as 0.088 and 0.423 g L^?1 day^?1 for L. limnetica. This is the first ever attempt to evaluate and optimize various parameters affecting the growth of cyanobacterial biomass of L. limnetica and O. obscura as well as their carbohydrate contents.     

One pot,three component 1,3 dipolar cycloaddition: Regio and diastereoselective synthesis of spiropyrrolidinyl indenoquinoxaline derivatives

A competent and highly discriminating one-pot synthesis of highly diversified novel functionalized indenoquinoxalone grafted spiropyrrolidine linked chromene-3-carbonitrile conjugates accumulating three pharmocophoric cores, heterocyclic indenoquinoxalone, pyrrolidines and chromene-3-carbonitrile in a single molecular framework by means of 1,3-dipolar cycloaddition reaction between indenoquinoxalone, proline/benzyl amine and chromene-3-carbonitrile in ethanol under classical and microwave conditions is described. The three component 1,3-dipolar cycloaddition reaction proceeds via in situ generation of azomethine ylides by the decarboxylative condensation of indenoquinoxalone with proline/benzyl amine and their selectivity towards the endo cyclic double bonds of dipolarophile (chromene-3-carbonitrile) leading to the formation of highly functionalised regio- and diastereoselective molecular hybrids. This methodology exemplifies the green chemistry protocol such as mild reaction conditions, high yields, one-pot procedure and operational simplicity.     

Site-selective C–H nitration of N-aryl-7-azaindoles under palladium(II) catalysis

The site-selective C–H nitration reaction of 7-azaindoles with t-butyl nitrite under palladium catalysis is described. This protocol provides an efficient method for the construction of ortho-nitrated N-aryl-7-azaindoles with excellent site-selectivity and functional group compatibility. The formed 7-azaindole derivatives can be readily transformed into 7-azaindoles containing an aniline functional group under palladium-catalyzed hydrogenation conditions.     

An ab initio study of water clusters in gas phase and bulk aqueous media: (H2O)n,n=1–12

Geometries of several clusters of water molecules including single minimum energy structures of n‐mers (n=1–5), several hexamers and two structures of each of heptamer to decamer derived from hexamer cage and hexamer prism were optimized. One structural form of each of 11‐mer and 12‐mer were also studied. The geometry optimization calculations were performed at the RHF/6‐311G* level for all the cases and at the MP2/6‐311++G** level for some selected cases. The optimized cluster geometries were used to calculate total energies of the clusters in gas phase employing the B3LYP density functional method and the 6‐311G* basis set. Frequency analysis was carried out in all the cases to ensure that the optimized geometries corresponded to total energy minima. Zero‐point and thermal free energy corrections were applied for comparison of energies of certain hexamers. The optimized cluster geometries were used to solvate the clusters in bulk water using the polarized continuum model (PCM) of the self‐consistent reaction field (SCRF) theory, the 6‐311G* basis set, and the B3LYP density functional method. For the cases for which MP2/6‐311++G** geometry optimization was performed, solvation calculations in water were also carried out using the B3LYP density functional method, the 6‐311++G** basis set, and the PCM model of SCRF theory, besides the corresponding gas‐phase calculations. It is found that the cage form of water hexamer cluster is most stable in gas phase among the different hexamers, which is in agreement with the earlier theoretical and experimental results. Further, use of a newly defined relative population index (RPI) in terms of successive total energy differences per water molecule for different cluster sizes suggests that stabilities of trimers, hexamers, and nonamers in gas phase and those of hexamers and nonamers in bulk water would be favored while those of pentamer and decamer in both the phases would be relatively disfavored. © 2001 John Wiley & Sons, Inc. Int J Quant Chem 81: 90–104, 2001     

Controlled growth of flower-like,rod-like,and snowflake-like ZnO nanostructures using agarose as biotemplate and its photoluminescence property

Different nanostructures such as flower-like, rod-like, and snowflake-like of ZnO have been synthesized by varying the amount of agarose using sonochemical method. It is found that morphology is governed by amount of agarose as well as ultrasonic treatment. Three amounts of agarose 0.01, 0.1, and 1.00 g are used to investigate its effect on ZnO. X-ray diffraction (XRD) confirmed the formation of single phase with hexagonal structure. Scanning electron microscopy (SEM) showed flower-like, rod-like, and snowflake-like morphology for 1.00, 0.1, and 0.01 g agarose, respectively. UV/Visible absorption study showed blue shift at band-edge absorption in comparison to bulk ZnO. Photoluminescence spectra showed band-edge emission at 399 nm for lowest amount of agarose which quenched on increasing the agarose amount. These findings show a better and more environment friendly procedure for production of ZnO of readily adjustable morphology.     

An ab initio theoretical study of electronic structure and properties of 2'-deoxyguanosine in gas phase and aqueous media

Molecular geometries of two structural forms of 2'-deoxyguanosine (keto-N9R and keto-N7R, R = the sugar moiety) considering both the C2'-endo and C3'-endo conformations of the sugar ring and those of the complexes of these species with two water molecules each were optimized employing the ab initio RHF procedure. A mixed basis set consisting of the 6-311+G* basis set for the nitrogen atom of the amino group and the 4-31G basis set for all the other atoms was used. The RHF calculations were followed by correlation correction of the total energy at the MP2 level. Both the structural forms of 2'-deoxyguanosine were solvated using the polarized continuum model (PCM) of the self-consistent reaction field (SCRF) theory and the corresponding RHF optimized geometries at the RHF and MP2 levels. Geometry optimization was also performed in aqueous media using the Onsager model at the RHF level using the above-mentioned mixed basis set, and subsequently, using the reoptimized geometries, single-point MP2 calculations were performed. It is found that both the keto-N9R and keto-N7R forms of 2'-deoxyguanosine as well as their complexes with two water molecules each would occur, particularly at the water-air interface. Though the normal Watson-Crick-type base pairing would not be possible with the keto-N7R form of 2'-deoxyguanosine(G*), two other (G*-C and G*-T) base pairing schemes may occur with this form of the nucleoside, which may cause mutation. The present calculated geometry of the keto-N9R form of the anti-conformation of 2'-deoxyguanosine including the dihedral angle chi(CN) agree satisfactorily with the available crystallographic results. The present results also agree satisfactorily with those obtained by other authors earlier for the keto-N9R form of 2'-deoxyguanosine using B3LYP and MP2 methods employing the 6-31G* basis set. Using transition state calculations, it is shown that tautomerism of guanine and other similar molecules where the tautomers would coexist would be facilitated by the occurrence of the H(+) and OH(-) fragments of water molecules. Further, this coexistence of the two tautomers appears to make the C8 carbon atom located between the N7 and N9 nitrogen atoms susceptible to attack by the OH(-) group. Thus, an explanation is obtained for the efficient formation of the reaction product 8-hydroxy-2'-deoxyguanosine, which serves as a biomarker for oxidative damage to DNA in biological systems.     

Static and Kinetic Studies on the Adsorption Behavior of Sulfadiazene

To investigate the nature of interactive forces between sulfadiazene molecules and alumina surface the experiments were performed for the adsorption of sulfadiazene (SD) from its aqueous sulution onto the alumina surfaces at 25 ± 0.2°C and the influence of factors such as increasing concentration of SD (4.0–20.0 × 10^–3 mol cm^–3), the time required for adsorption equilibrium, pH (2.0–12.0) and temperature (5–45°C) of the adsorption medium, the presence of ions like Cl^–, SO^2– ₄ and PO^3– ₄ (0.01–0.30 M) and organic solvents (5% v/v) were observed on the course of adsorption of SD. Various adsorption and kinetic parameters such as adsorption coefficient, the rate constants for adsorption and desorption were also evaluated. The results of the above cited studies facilitated to formulate the mechanisms of interaction between SD and alumina surfaces. From application view point the present work may be a potential tool for an effective chromatographic separation of sulfa drugs from industrial effluents.     

Nanocomposite blend gel polymer electrolyte for proton battery application

A proton-conducting nanocomposite gel polymer electrolyte (GPE) system, [35{(25 poly(methylmethacrylate) (PMMA) + 75 poly(vinylidenefluoride-co-hexafluoropropylene) (PVdF-HFP))?+?xSiO₂}?+?65{1 M NH₄SCN in ethylene carbonate (EC) + propylene carbonate (PC)}], where x?=?0, 1, 2, 4, 6, 8, 10, and 12, has been reported. The free standing films of the gel electrolyte are obtained by solution cast technique. Films exhibit an amorphous and porous structure as observed from X-ray diffractometry (XRD) and scanning electron microscopy (SEM) studies. Fourier transform infrared spectrophotometry (FTIR) studies indicate ion–filler–polymer interactions in the nanocomposite blend GPE. The room temperature ionic conductivity of the gel electrolyte has been measured with different silica concentrations. The maximum ionic conductivity at room temperature has been observed as 4.3?×?10^?3?S?cm^?1 with 2 wt.% of SiO₂ dispersion. The temperature dependence of ionic conductivity shows a typical Vogel-Tamman-Fulcher (VTF) behavior. The electrochemical potential window of the nanocomposite GPE film has been observed between ?1.6 V and 1.6 V. The optimized composition of the gel electrolyte has been used to fabricate a proton battery with Zn/ZnSO₄·7H₂O anode and PbO₂/V₂O₅ cathode. The open circuit voltage (OCV) of the battery has been obtained as 1.55 V. The highest energy density of the cell has been obtained as 6.11 Wh?kg^?1 for low current drain. The battery shows rechargeability up to 3 cycles and thereafter, its discharge capacity fades away substantially.