Bioconversion of cellulose into ethanol by nonisothermal simultaneous saccharification and fermentation

The kinetic characteristics of cellulase and beta-glucosidase during hydrolysis were determined. The kinetic parameters were found to reproduce experimental data satisfactorily and could be used in a simultaneous saccharification and fermentation (SSF) system by coupling with a fermentation model. The effects of temperature on yeast growth and ethanol production were investigated in batch cultures. In the range of 35-45 degrees C, using a mathematical model and a computer simulation package, the kinetic parameters at each temperature were estimated. The appropriate forms of the model equation for the SSF considering the effects of temperature were developed, and the temperature profile for maximizing the ethanol production was also obtained. Briefly, the optimum temperature profile began at a low temperature of 35 degrees C, which allows the propagation of cells. Up to 10 h, the operating temperature increased rapidly to 39 degrees C, and then decreased slowly to 36 degrees C. In this nonisothermal SSF system with the above temperature profile, a maximum ethanol production of 14.87 g/L was obtained.     

Solvent extraction and bulk liquid membrane transport of Co(II) and Ni(II) ammine cations by proton-ionizable crown ethers

Separation efficiencies and selectivities in solvent extraction of Co(II) and Ni(H) ammine cations from aqueous solutions into chloroform and toluene and in transport through bulk toluene membranes by proton-ionizable crown ethers have been determined. Six proton-ionizable crown ethers with differing lipophilicities, polyether cavity sizes and ionizable groups (carboxylic and sulfonic acid functions) were examined. Higher selectivity and efficiency for Co(II) ammine cation extraction was observed for the more lipophilic, proton-ionizable crown ethers. Highly lipophilic crown carboxylic acids provided effective and selective transport of Co(II) ammine cations through bulk toluene membranes.Presented in part at the 6th International Symposium on High Purity Materials in Science and Technology: Preparation, Characterization and Application of Well-Defined Materials, Dresden, GDR, May 1985, Poster D91, Poster Abstracts, pp. 144, 145.All extraction and transport experiments were conducted at this location.     

Construction of a 2,6-difunctionalized 2-methyl-2H-1-benzopyran library by using a solid-phase synthesis protocol

[reaction: see text] A library containing 1200 analogues of 2,6-difunctionalized 2-methyl-2H-1-benzopyran was constructed by using a solid-phase synthesis protocol. Polymer-bound 6-amido-, 6-sulfonamido-, and 6-uredo-functionalized 2-hydroxymethyl-2-methylbenzopyrans 10 were prepared as part of a first-generation diversification step by employing reactions of respective acid halides, sulfonyl chlorides, and isocyanates with the amine precursor 7. Transformations of the resin-bound intermediates 10 by reactions with alkyl and acid halides were then used to produce a diverse series of 2,6-difunctionalized 2-methyl-2H-1-benzopyran analogues 12 and 14.     

In situ disorder-order transformation in synthetic gallosilicate zeolites with the NAT topology

Here, we report that synthetic gallosilicate molecular sieves with the NAT topology and Si/Ga ratios close to but slightly higher than 1.50 undergo an in situ transformation under their crystallization conditions. The materials have been studied ex situ by using powder X-ray diffraction, elemental and thermal analyses, and multinuclear MAS NMR. The transformation is characterized by a change in the distribution of Si and Ga of the NAT framework, from a quite (but not completely) disordered phase to a very highly (but not completely) ordered one, accompanied by a change from tetragonal to orthorhombic symmetry. During most of the solution-mediated transformation, no noticeable signs of fresh precipitation, phase segregation, or changes in the chemical composition are detected. Intermediate materials show variations in the degree of Si-Ga ordering and orthorhombic distortion and are not physical mixtures of the disordered and ordered phases. Ab initio calculations strongly suggest a preferential siting of Si in the tetrahedral sites involved in a smaller number of 4-rings in the NAT topology (i.e., the low multiplicity site). The cost of violations of Loewenstein's rule has also been calculated. For this topology and chemical composition the preferential siting and Loewenstein's rule drive together the system to the ordered configuration. A Monte Carlo sampling procedure affords a reasonable model for the initial, mainly disordered state, which fits well within the experimental disorder-order series.     

The effect of the bridge group on the thermal stability of nitro-substituted aromatic polyamides

The effect of introducing a bridge group into the diamine moiety on the thermal stability of aromatic polyamides substituted with nitro group in the diamine ring at the ortho position to the amide group was studied. Our present work showed that the bridge group, whether it was electron withdrawing or releasing, did not have a significant effect on the activity of the nitro group for the intramolecular cyclization reaction to poly(benzoxazole)s.     

Stoichiometric and catalytic deuterium and tritium labeling of "unactivated" organic substrates with cationic Ir(III) complexes

[reaction: see text] Ir(III) complex [Cp(PMe(3))IrMe(CH(2)Cl(2))][BAr(f)] (1) was used to introduce deuterium stoichiometrically into substituted naphthalene/benzene templates and several "drug-like" entities. The exchange process is tolerant of a wide array of functional groups. Labeling of warfarin using subatmospheric pressures of T(2) led to specific activities and total activities rivaling current functional group directed tritium labeling methods. When paired with the appropriate deuterium donor, Cp(PMe(3))Ir(H(3))OTf (4) was found to deuterate a number of organic compounds catalytically.