基于石墨烯/石墨烯卷轴复合薄膜高灵敏度柔性压力传感器

一维导电材料例如纳米线,大量应用于柔性压力传感器中. 但是一维材料和基底之间接触时相互作用力较弱,使得传感器灵敏度、响应时间、和循环寿命等性能指标有待进一步提高. 针对这些问题,设计了石墨烯/石墨烯卷轴多分子层复合薄膜作为传感器导电层. 石墨烯卷轴具有一维结构,而石墨烯的二维结构可以牢固地固定卷轴,以确保高导电性复合薄膜与基底之间的粘附性,同时整体结构的导电通道得到了增加. 由于一维和二维结构的协同效应,实现了应变灵敏度系数3.5 kPa^-1、 响应时间小于50 ms、能够稳定工作1000次以上的压阻传感器.     

Spin-exchange relaxation of naturally abundant Rb in a K-Rb-~(21)Ne self-compensated atomic comagnetometer

The total effective spin-exchange relaxation of naturally abundant Rb in a K–Rb–21Ne comagnetometer is analyzed,and the results show that the coexistence of 87Rb and 85Rb isotopes in the same volume can lead to a large extra spinexchange broadening compared to pure 87Rb.This broadening mainly comes from the contribution of the equivalent reduction in the Rb spin-exchange rate.On this basis,an approximate relaxation model is proposed and experimentally demonstrated to be more accurate than that from a previous work.This study also provides a method for determining the properties of alkali-metal vapor cells.     

光锥与TDI-CCD耦合监控中测试目标的一种实现方法

为了给光锥与时间延迟积分电荷耦合器件耦合监控装置提供有效的被测运动条纹,分析了传统推扫成像实验装置的不足之处,设计了电子显示目标滚屏运动装置.采用光学相机对印刷条纹静止成像,并用TDI-CCD数字相机对监视器屏幕上的运动条纹动态成像.实验结果表明,该方案解决了高分辨率的鉴别率图样无法在监视器或投影仪上精确显示的困难.与传统的实验室模拟装置相比,该方案提高了鉴别率条纹的运动稳定性,减小了条纹运动速率与TDI-CCD扫描行频间的失配误差,不仅能够对耦合过程实施监控,而且还能用于耦合系统的像质评价.     

Selective photocatalytic aerobic oxidation of methane into carbon monoxide over Ag/AgCl@SiO2

Design of active catalysts for chemical utilization of methane under mild conditions is of great importance, but remains a challenging task. Here, we prepared a Ag/AgCl with SiO₂ coating (Ag/AgCl@SiO₂) photocatalyst for methane oxidation to carbon monoxide. High carbon monoxide production (2.3 μmol h⁻¹) and high selectivity (73%) were achieved. SiO₂ plays a key role in the superior performance by increasing the lifetime of the photogenerated charge carriers. Based on a set of semi in situ infrared spectroscopy, electron paramagnetic resonance, and electronic property characterization studies, it is revealed that CH₄ is effectively and selectively oxidized to CO by the in situ formation of singlet ¹O₂via the key intermediate of COOH*. Further study showed that the Ag/AgCl@SiO₂ catalyst could also drive valuable conversion using real sunlight under ambient conditions. As far we know, this is the first work on the application of SiO₂ modified Ag/AgCl in the methane oxidation reaction.

The Ag/AgCl@SiO₂ catalyst exhibits excellent photocatalytic activity in selective aerobic oxidation of methane to carbon monoxide with high selectivity, and extended real light simulation feasibility shows potential in practical application.     

超支化聚(酰胺-酯)的端基光致变色改性研究

采用丁二酸酐、三羟甲基氨基甲烷为主要原料,先在冰水浴条件下合成AB3型单体,然后进行熔融缩聚制得超支化聚(酰胺-酯)(HBP),最后用4-(4′-二甲氨基苯基偶氮)苯甲酸对HBP的末端羟基进行功能化改性,得到了一种具有光致变色和酸碱变色性的HBP;用紫外光谱对改性超支化聚(酰胺-酯)的变色性进行了研究。结果表明：随紫外光照时间延长紫外吸收强度增加;随pH值增大紫外吸收波长向短波方向移动。     

分子筛合成中六亚甲基亚胺与环己胺二元胺的模板作用

 以固体硅胶为硅源考察了六亚甲基亚胺(HMI)和环己胺(CHA)二元胺模板剂对分子筛合成产物的影响. XRD测试结果表明,当晶化温度为160 ℃,晶化时间为84 h, SiO2/Al2O3摩尔比为30, Na2O∶H2O∶(HMI+CHA)∶SiO2摩尔比为0.11∶45∶0.35∶1时,即使HMI仅占二元胺模板剂的25%(摩尔分数),所得分子筛仍为MCM-22; 其它条件相同时,以单纯CHA为模板剂得到的是ZSM-35分子筛. 用13C MAS NMR研究了HMI和CHA的状态,结果表明在单一HMI合成体系中,HMI既起MCM-22结构导向作用,又经质子化后起稳定骨架的作用; 而在HMI和CHA二元胺体系中,HMI主要起结构导向作用,CHA则填充在MCM-22层间十元环中稳定骨架.     

YSZ电解质薄膜的制备方法

固体氧化物燃料电池(solid oxide fuel cells, SOFC)和固体氧化物电解池(solid oxide electrolytic cells, SOEC)制备的关键技术之一是在保证致密性的前提下将Y2O3稳定ZrO2(yttria-stabled zirconia, YSZ)电解质薄膜化.本文将YSZ电解质薄膜制备方法归类为陶瓷粉末法、化学法和物理法,综述了近年来这些方法的研究进展.通过对每种方法技术特点的说明和实例举证,探讨了这些方法的优、缺点和适用场合.最后,通过分析和比较,对YSZ薄膜化方法未来的发展进行了展望.     

AR-Ag(Ⅰ)体系的共振散射光谱法测定痕量银

在pH=4.4的NaAc-HAc缓冲介质和2.0×10-3mol/L十二烷基苯磺酸钠(SDBS)溶液中,Ag(Ⅰ)与茜素红(AR)可形成较稳定的离子缔合物微粒,其在324、360和500nm处分别产生3个较强的共振散射峰.在最佳实验条件下,浓度在0.022～2.160μg/mL之间的Ag(Ⅰ)与共振散射强度△I324nm呈较好的线性关系,检测限为0.139 ng/mL.据此,建立了一种测定痕量银的共振散射新方法,并将该方法用于废胶片中痕量银的测定.     

混合胺体系中 MCM-49/ZSM-35 复合分子筛的晶化过程

 采用 X 射线衍射、N2 吸附-脱附、扫描电镜和傅里叶变换红外光谱等技术, 研究了 MCM-49/ZSM-35 复合分子筛在 Na2O-SiO2-Al2O3-CHA (环己胺)-HMI (六亚甲基亚胺)-H2O 合成体系中, 先在低温 80 ?C 老化 4 h, 再经 160 ?C 晶化不同时间的演变过程. 结果表明, 在该混合胺体系中, 首先生成 MCM-49 分子筛, 随着晶化时间的延长, 形成 ZSM-35 含量逐渐增加的 MCM-49/ZSM-35 复合分子筛, 最后生成纯 ZSM-35 分子筛; ZSM-35 的生成是以 MCM-49 分子筛的消耗为代价的.     

The application of digital image recognition to the analysis of two-dimensional fingerprints

High-performance liquid chromatography (HPLC) fingerprint has been commonly used in the quality control and assessment of herbal medicines, and two-dimensional (2D) fingerprint obtained by means of HPLC-diode array detector (HPLC/DAD) can provide higher reliability. In this paper, an approach to the analysis of the 2D HPLC/DAD fingerprints, which was based on digital image recognition techniques, was developed for the first time. First, wavelet transform was employed to eliminate noise signal in the 2D fingerprint, and then the 2D fingerprint was converted into grayscale image. Second, several features of the image were calculated, and hierarchical clustering. This approach was applied to the qualitative analysis of the different samples of coptis chinensis, and the clustering result of samples was all highly consistent with the real situation. Based on the densities in grayscale image, three components in standard samples were quantitative analyzed, and the obtained correlation coefficients between concentration and grayscale density were more than 0.999. Our study indicated that the analysis of the 2D HPLC/DAD fingerprint was successful based on the idea and techniques of digital image recognition techniques, and this proposed approach provided a new pathway for the analysis of two-dimensional spectrums.