Enhanced transdermal delivery by using electrostatically interactive chitosan nanocapsules

This paper describes a useful means of noninvasively enhancing transdermal delivery efficiency. For this, chitosan nanocapsules with positive surface charges were fabricated by using the in situ precipitation method. These nanocapsules cannot only have an ability to encapsulate the drug molecule (this study used riboflavin 5′-monophosphate), but also electrotatically interact with the stratum corneum layer. To demonstrate this, fluorescence-labeled polymer nanoparticles with different particle sizes as well as surface charges were topically applied onto the skin and their distribution was directly imaged. This demonstration experiment allowed us to figure out that once the nanocapsules were provided with positive surface charges, they readily deposited into the stratum corneum layer due to the electrostatic interaction. Further quantitative characterization of the penetrating amount of riboflavin 5′-monophosphate by using the Frantz diffusion cell method showed that our chitosan nanocapsule system effectively improved transdermal delivery efficiency.     

Improved Compatibility of Styrene-Maleic Anhydride Copolymer/Polyethylene Blends Through Reactive Mixing

Abstract

To improve the compatibility of styrene-maleic anhydride copolymer/low density polyethylene (SMA/LDPE) blends, LDPE grafted with 2-hydroxyethyl methacrylate-isophorone diisocyanate (LDPE-g-HI) was prepared and blended with SMA of which anhydride was converted to carboxylic acid (SMAAc). The infrared spectra of LDPE-g-HI established the presence of isocyanate group. In the blend morphology, some adhesions between the two phases and much finer dispersions were observed in the SMAAc/LDPE-g-HI blends, indicating that chemical reactions took place during the melt blending. The lower heat capacity change at the glass transition temperature demonstrated that chemical bonds were produced in the SMAAc/LDPE-g-HI blends. From the results of the rheological test, it was found that strong positive deviation from the mixing rule occurred in viscosity for the SMAAc/LDPE-g-HI blends, concerning with good adhesion and finer dispersions. In the measurement of tensile property, the improved mechanical properties for the SMAAc/LDPE-g-HI blends were shown.     

Composite of SiO2 and Hydrogel Having Microphase Separated Structure: Physical Properties Dependence on pH

Abstract

Organic-inorganic composite gel was prepared by using PEG-modified urethane acrylate (PMUA) gel and tetraethoxysilane (TEOS). PMUA gel was prepared by the phase-inversion emulsion polymerization of PMUA emulsion. The gelation of PMUA emulsion using this method enables PMUA gel to swell with H₂O, TEOS, and ethanol. Hydrolysis and condensation reaction rates of the sol-gel process are strongly influenced by the pH controlled by catalysts such as HCl and NH₄OH. Additionally, the morphology on the cross section of composite and the amount of silica ingredient incorporated into the composite gel were dependent on solvent, the molar ratio of H₂O to TEOS, as well as the pH value.

As the silica content increased, due to hydrogen bonds interacting between PMUA gel and SiO₂, particles, the tensile strength of composites considerably increased, whereas the elongation at break decreased. The incorporation of silica ingredient in PMUA gel/silica composites was verified with FTIR/ATR and SEM. The amount of the silica component in the composite was indirectly investigated by using TGA thermal analysis.     

Effect of plasma etching on photoluminescence of SnO(x)/Sn nanoparticles deposited on DOPC lipid membrane

The photoluminescence characteristic of the SnO(x)/Sn nanoparticles deposited on a solid supported liquid-crystalline phospholipid (1,2-dioleoyl-sn-glycero-3-phosphocholine) membrane was probed after plasma etching the nanoparticle monolayer. It was shown that the plasma etching of the nanoparticle surface greatly altered the particle morphology and enhanced the PL effect, especially when the particle size was below 10 nm in spite of strong presence of surrounding carbon. The enhancement mainly stemmed from the growth of a new PL peak due to the additional defect states produced on the nanoparticle surface by the plasma etching. It was also shown that hydrating the SnO(x)/Sn nanoparticles similarly improved the PL response of the nanoparticles as the hydration produced an additional oxygen-rich oxide layer on the particle surface.     

Achiral auxiliary-assisted chiral transfer via microwave-accelerated aza-Claisen rearrangement: a short synthesis of (+)-1-hydroxyquinolizidinone

A short and efficient synthesis of (+)-1-hydroxyquinolizidinone as an advanced core intermediate for the syntheses of (+)-epiquinamide, (+)-homopumiliotoxin, and (+)-lupinine is described. The key feature of our strategy includes a sequential chiral transfer using an achiral phenylsulfide auxiliary via microwave-accelerated aza-Claisen rearrangement of the unexplored N-thiophenoxyacetyl-α-vinyl piperidine substrate and the oxone-induced transannulation.     

Design of polydiacetylene-phospholipid supramolecules for enhanced stability and sensitivity

We present polydiacetylene (PDA) liposome assemblies with various phospholipids that have different headgroup charges and phase transition temperatures (T(m)). 10,12-Pentacosadiynoic acid (PCDA)-epoxy was used as a base PDA monomer and the insertion of highly charged phospholipids resulted in notable changes in the size of liposome and reduction of the aggregation of PDA liposome. Among the various phospholipids, the phospholipid with a moderate T(m) demonstrated enhanced stability and sensitivity, as measured by the size and zeta potential over storage time, thermochoromic response, and transmission electron microscopy images. By combining these results, we were able to detect immunologically an antibody of bovine viral diarrhea virus over a wide dynamic range of 0.001 to 100 μg/mL.     

Lithium isotope separation by chemical exchange with polymer-bound azacrown compounds

The chromatographic separation of lithium isotopes was investigated by chemical exchange with the recently synthesized polymer-bound dibenzo pyridino diamide azacrown (DBPDA) and reduced dibenzo pyridino diamide azacrown (RDBPDA). Column chromatography was employed for the determination of the effect of solvents and ligand conformation on the separation coefficients. The maximum separation coefficients, , for the DBPDA and RDBPDA at 20.0±0.02°C with acetonitrile as eluent, were found to be 0.034±0.002 and 0.035±0.002, respectively. The isotope separation coefficient and adsorption capability of the lithium ion on the DBPDA and RDBPDA were only slightly dependent on ligand structure, but strongly dependent on the solvent. DBPDA and RDBPDA appeared to have almost the same value for the isotope separation coefficient of lithium.     

Synthesis and characterization of monodisperse magnetic composite particles for magnetorheological fluid materials

Monodisperse magnetic composite particles (MCP) were prepared and characterized for a study of magnetic field-responsive fluids. Magnetic composite particles used are iron oxide-coated polymer composite particles, which were synthesized through in situ coating of iron oxide onto pre-existing polymer particles by the reduction of ferrous fluids. For a uniform and bulk coating of iron oxide, the porous structure was introduced into the substrate polymer particles through a two-step seeded polymerization method. Moreover, surface cyano-functionality was born from acrylonitrile unit of substrate polymer and it played an important role in obtaining successful uniform coating. The structure of the composite particle was analyzed by using a thermo gravimetric analysis (TGA) and a X-ray diffraction (XRD) analysis. The magnetization property of the particle was also observed. Then, the rheological properties of monodisperse magnetorheological (MR) suspensions of magnetic composite particles were examined under a magnetic field using a parallel-plate type commercial rheometer. From the rheological measurements, it was found that MR properties of the magnetic composite suspensions are dependent on the iron oxide content and the fluid composition.