A novel electrosynthetic system for anodic substitution reactions by using parallel laminar flow in a microflow reactor

We have developed a novel electrosynthetic system for anodic substitution reactions by using parallel laminar flow in a microflow reactor. This system enables nucleophilic reactions to overcome the restraint, such as the oxidation potential of nucleophiles and the stability of cationic intermediates, by the combined use of ionic liquids as reaction media and the parallel laminar flow in the microflow reactor. By using this novel electrosynthetic system, the anodic substitution reaction of carbamates, especially of cyclic carbamates, with allyltrimethylsilane were carried out to provide the corresponding products in moderate to good conversion yields in a single flow-through operation at ambient temperature (without the need for low-temperature conditions).     

Living cationic ring‐opening polymerization of five‐membered cyclic dithiocarbonate controlled by neighboring group participation of carbamate group

A five‐membered cyclic dithiocarbonate having phenylcarbamate moiety 1 underwent cationic ring‐opening polymerization by using methyl trifluoromethanesulfonate as an initiator in nitrobenzene at 60 °C. Both of the corresponding first‐order kinetic plot and conversion‐molecular weight plot showed linearity to suggest the living fashion of the polymerization, which was then supported by two‐stage polymerization experiment. The living fashion as well as the regioselective formation of the repeating unit suggested significant contribution of the neighboring group participation of the carbamate group to form a stabilized cationic propagating end, of which structure was confirmed by performing an equimolar reaction of 1 and methyl trifluoromethanesulfonate with analyzing the resulting species by NMR spectroscopy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4459–4464, 2007     

Structural study of NO adsorbed on the reconstructed Pt(110)-(1 x 2) surface with X-ray photoelectron diffraction and near-edge X-ray absorption fine structure spectroscopy

The adsorption structure of NO on the reconstructed Pt(110)-(1 x 2) surface was studied with X-ray photoelectron spectroscopy (XPS), X-ray photoelectron diffraction (XPD), low-energy scanned-angle photoelectron diffraction (LESA-PD), and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. The experiments were performed at 180 K, where no surface lifting from (1 x 2) to (1 x 1) takes place after NO adsorption. XPS indicates that the (1 x 2) unit cell of the Pt(110) surface contains 1.5 NO molecules at the saturated coverage. XPD and LESA-PD analyses allow us to propose a structural model for the NO adlayer, where two-thirds of the NO molecules in the (1 x 2) unit cell are adsorbed on the atop site of the close-packed Pt rows (ridges) along the [10] direction with an inclined geometry and one-third of the NO molecules adsorb on the bridge site between the Pt ridges with an upright configuration. This model is supported by the N K-edge NEXAFS experiments and is consistent with the recently reported model based on the density functional theory (Orita, H.; Nakamura, I.; Fujitani, T. J. Phys. Chem. B 2005, 109, 10312).     

Flow Rate Prediction for a Semi-permeable Membrane at Low Reynolds Number in a Circular Pipe

Transport in Porous Media - A concise and accurate prediction method is required for membrane permeability in chemical engineering and biological fields. As a preliminary study on this topic, we...     

A novel cyclodimerization of 3-methyl-3-butenenitrile. An efficient synthesis of 4-cyanoisophorone

Dimerization of 3-methyl-3-butenenitrile (1) by lithium dialkylamide gave selectively 3,5,5-trimethyl-1-amino-4-cyanocyclohexa-1,3-diene (2), which was easily hydrolyzed by aqueous acid to afford 4-cyanoisophorone (3,5,5-trimethyl-4-cyano-cyclohex-2-enone) (3) quantitatively.     

Quantitative imaging of ion transport through single nanopores by high-resolution scanning electrochemical microscopy

Here we report on the unprecedentedly high resolution imaging of ion transport through single nanopores by scanning electrochemical microscopy (SECM). The quantitative SECM image of single nanopores allows for the determination of their structural properties, including their density, shape, and size, which are essential for understanding the permeability of the entire nanoporous membrane. Nanoscale spatial resolution was achieved by scanning a 17 nm radius pipet tip at a distance as low as 1.3 nm from a highly porous nanocrystalline silicon membrane in order to obtain the peak current response controlled by the nanopore-mediated diffusional transport of tetrabutylammonium ions to the nanopipet-supported liquid-liquid interface. A 280 nm × 500 nm image resolved 13 nanopores, which corresponds to a high density of 93 nanopores/μm(2). A finite element simulation of the SECM image was performed to assess quantitatively the spatial resolution limited by the tip diameter in resolving two adjacent pores and to determine the actual size of a nanopore, which was approximated as an elliptical cylinder with a depth of 30 nm and major and minor axes of 53 and 41 nm, respectively. These structural parameters were consistent with those determined by transmission electron microscopy, thereby confirming the reliability of quantitative SECM imaging at the nanoscale level.     

Estimation of the latent track size of CR-39 using atomic force microscope

As a frame work of the study for the latent track size measurement using atomic force microscope, we have measured the minute etch pits and the extremely small amount of bulk etch of CR-39 at the beginning of chemical etching, and obtained its growth curves in nanometer dimensions. The pieces of CR-39 were exposed to 6 MeV/nC and Fe ions with normal incidence angle and were etched in 70°C 7 N NaOH solution for 0.5,1,2,3,5 min. The diameters of latent track were estimated to be 17 nm for Fe ions and 8 nm for C ions, respectively. These values are comparable to the experimental data on the average ‘track core diameters’ that have been obtained by various experimental techniques.     

Extension and characterization of pressure-sensitive molecular film

Pressure-sensitive paint (PSP) has the potential as a diagnostic tool for pressure measurement in high Knudsen number regime because it works as a so-called “molecular sensor”. However, there are few reports concerning application of PSP to micro-devices, because conventional PSPs are too thick owing to polymer binders. In our previous work, we adopted the Langmuir–Blodgett (LB) technique to fabricate the pressure-sensitive molecular film (PSMF) using Pd(II) Mesoporphyrin IX (PdMP), which has pressure sensitivity only in the low pressure range (below 130 Pa). In this study, aiming for pressure measurement under an atmospheric pressure condition, we have constructed four samples of PSMFs composed of Pt(II) Mesoporphyrin IX (PtMP), Pt(II) Mesoporphyrin IX dimethylester (PtMPDME), Pt(II) Protoporphyrin IX (PtPP) and Cu(II) Mesoporphyrin IX dimethylester (CuMPDME) as luminescent molecules. The pressure sensitivity of those PSMFs was measured, and it was clarified that the pressure sensitivity of PSMF-PtMP is the highest among the four samples. Moreover, the temperature dependency of PSMF-PtMP was investigated, and we found that the temperature dependency of PSMF is dominated not by the oxygen diffusion in the layer, but by non-radiative deactivation process of excited luminescent molecules.     

Reaction of carbon dioxide with glycidol: The synthesis of a novel hyperbranched oligomer with a carbonate main chain with a hydroxyl terminal

A novel branched polycarbonate with a hydroxyl group at the chain end was synthesized by the copolymerization of glycidol with carbon dioxide (CO₂). The copolymerization was carried out with 5 mol % of an alkali metal halide or quaternary ammonium salt as a catalyst under atmospheric CO₂. The obtained poly(glycidol‐co‐carbon dioxide) was O‐benzoylated and O‐silylated, and the corresponding polymers were analyzed with IR, size exclusion chromatography, ¹³C NMR, and ²⁹Si NMR. The IR spectroscopy analysis of the O‐benzoylated polymer revealed that the maximum incorporation degree of the carbonate group was 90% (i.e., the CO₂/glycidol composition ratio was 0.9:1.0). The incorporation of CO₂ as a carbonate unit was also confirmed by the treatment of this polymer with n‐butylamine, which caused the aminolysis of the carbonate and led to degraded products. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2506–2511, 2004