Stabilization of High‐Valence Ruthenium with Silicotungstate Ligands: Preparation,Structural Characterization,and Redox Studies of Ruthenium(III)‐Substituted α‐Keggin‐Type Silicotungstates with Pyridine Ligands, [SiW11O39RuIII(Py)]5−

Ruthenium(III)‐substituted α‐Keggin‐type silicotungstates with pyridine‐based ligands, [SiW₁₁O₃₉Ru^III(Py)]^5?, (Py: pyridine ( 1 ), 4‐pyridine‐carboxylic acid ( 2 ), 4,4′‐bipyridine ( 3 ), 4‐pyridine‐acetamide ( 4 ), and 4‐pyridine‐methanol ( 5 )) were prepared by reacting [SiW₁₁O₃₉Ru^III(H₂O)]^5? with the pyridine derivatives in water at 80 °C and then isolated as their hydrated cesium salts. These compounds were characterized using cyclic voltammetry (CV), UV/Vis, IR, and ¹H NMR spectroscopy, elemental analysis, titration, and X‐ray absorption near‐edge structure (XANES) analysis (Ru K‐edge and L₃‐edge). Single‐crystal X‐ray analysis of compounds 2 , 3 , and 4 revealed that Ru^III was incorporated in the α‐Keggin framework and was coordinated by pyridine derivatives through a Ru? N bond. In the solid state, compounds 2 and 3 formed a dimer through π? π interaction of the pyridine moieties, whereas they existed as monomers in solution. CV indicated that the incorporated Ru^III–Py was reversibly oxidized into the Ru^IV–Py derivative and reduced into the Ru^II–Py derivative.     

Hydrothermal Synthesis of Mo-Based Oxide Catalysts and Selective Oxidation of Alkanes

Mo-V-M(=Al, Ga, Bi, Sb and Te)–O mixed oxide catalysts were synthesized hydrothermally for the first time, characterized structurally, and tested for ethane and propane oxidation after activation by various ways. These catalysts were black solids of rod-shaped (fiber like) crystals, which had a layer structure in the direction of fiber axis and a high dimensional arrangement of metal octahedra in the cross-section plane. These fresh crystalline materials became active for catalytic oxidation of alkanes after heat-treatment at 600 °C and subsequent grinding in order to increase exposed plane of the cross-section. The resulting catalysts were very active for an oxidative dehydrogenation of ethane with 80% of the ethylene selectivity in the reaction temperature range of 300 to 400 °C and also showed about 50% selectivity to acrylic acid in the propane oxidation. Multi-functional character which derived from the high dimensional structure of the catalysts and mechanism of the selective alkane oxidation were discussed.     

Conversion of antennapedia homeodomain to zinc finger-like domain: Zn(II)-induced change in protein conformation and DNA binding

From the standpoint of protein dynamics and metalloprotein design, it is interesting to create an artificial protein which induces structural change and regulates its function by metal-ion binding. We engineered a novel protein, "Antennafinger (Ant-F)", whose structure and function can be controlled with Zn(II), by introducing the consensus sequence of a Cys(2)His(2)-type zinc finger protein into a non-metalloprotein scaffold, an Antennapedia homeodomain mutant (Ant-wt), selected using a motif-searching system. The circular dichroism studies demonstrate that Ant-F has secondary structures similar to Ant-wt and also changes its conformation due to Zn(II)-binding. The optical absorption spectra of the Co(II) complexes of Ant-F and its derivative proteins suggest that the geometry of the metal center of holo-Ant-F is tetrahedral and that the mutated Cys(2)His(2) residues are involved in the complex formation. In addition, the gel mobility shift assay reveals that the DNA binding activity of Ant-F can be regulated through Zn(II)-induced structural alteration. These results provide valuable information about the dynamic properties of proteins and a novel concept for metalloprotein design.     

Contribution of individual zinc ligands to metal binding and peptide folding of zinc finger peptides

Little is known about the contribution of individual zinc-ligating amino acid residues for coupling between zinc binding and protein folding in zinc finger domains. To understand such roles of each zinc ligand, four zinc finger mutant peptides corresponding to the second zinc finger domain of Sp1 were synthesized. In the mutant peptides, glycine was substituted for one of four zinc ligands. Their metal binding and folding properties were spectroscopically characterized and compared to those of the native zinc finger peptide. In particular, the electronic charge-transfer and d-d bands of the Co(II)-substituted peptide complexes were used to examine the metal coordination number and geometry. Fluorescence emission studies revealed that the mutant peptides are capable of binding zinc despite removing one ligand. Circular dichroism results clearly showed the induction of an alpha-helix by zinc binding. In addition, the structures of certain mutant zinc finger peptides were simulated by molecular dynamics calculation. The information indicates that His23 and the hydrophobic core formed between the alpha-helix and the beta-sheet play an essential role in alpha-helix induction. This report demonstrates that each ligand does not contribute equally to alpha-helix formation and coordination geometry in the zinc finger peptide.     

Transition metal salts-catalyzed aza-Michael reactions of enones with carbamates

Several transition metal salts were found to catalyze aza-Michael reactions of enones with carbamates efficiently. The catalytic activity was strongly dependent on the nature of the metal salts. While conventional Lewis acids such as BF(3).OEt(2), AlCl(3), or TiCl(4) showed lower activity, group 7-11 transition metal salts in higher oxidation states such as ReCl(5), Fe(ClO(4))(3).9H(2)O, RuCl(3).nH(2)O, OsCl(3).3H(2)O, RhCl(3).nH(2)O, PtCl(4).5H(2)O, or AuCl(3).H(2)O exhibited higher catalytic activity. [reaction: see text]     

Linear NiII-MnIII2-NiII tetramers: an oligomeric component of the MnIII2NiII single-chain magnets

Heterometallic linear tetramers [Mn(5-R-saltmen)Ni(pao)(bpy)(2)](2)(ClO(4))(4) (5-R-saltmen(2-) = N,N'-1,1,2,2-tetramethylethylene bis(5-R-salicylideneiminate); pao(-) = pyridine-2-aldoximate; bpy = 2,2'-bipyridine, R = H, 1; Cl, 2; Br, 3; MeO, 4) have been synthesized and structurally characterized. These compounds exhibit a [Ni(II)-NO-Mn(III)-(O)(2)-Mn(III)-ON-Ni(II)] skeleton where -ON- is an oximate bridge between Mn(III) and Ni(II) ions and -(O)(2)- is a bi-phenolate bridge between Mn(III) ions. These tetramers can be seen as oligomeric units of the heterometallic Mn(III)(2)-Ni(II) chain observed in a family of single-chain magnets (Clérac, R.; Miyasaka, H.; Yamashita, M.; Coulon, C. J. Am. Chem. Soc. 2002, 124, 12837. Miyasaka, H.; Clérac, R.; Mizushima, K.; Sugiura, K.; Yamashita, M.; Wernsdorfer, W.; Coulon, C. Inorg. Chem. 2003, 42, 8203.). Magnetic measurements on these tetramers confirm the nature of the magnetic interactions reported for the Mn(III)(2)-Ni(II) chains: a strong antiferromagnetic Mn(III)/Ni(II) coupling via the oximate bridge (J(Ni-Mn) ranges from -23.7 to -26.1 K) and a weak ferromagnetic Mn(III)/Mn(III) coupling through the bi-phenolate bridge (J(Mn-Mn) ranges from +0.4 to +0.9 K). These magnetic interactions lead to tetramers with an S = 2 ground state.     

Formation of azatitanacyclopentanes from ene-imines and a Ti(O-i-Pr)4/2i-PrMgX reagent and their synthetic reactions

ω-Vinylimines reacted with a Ti(O-i-Pr)₄/2i-PrMgX reagent to generate the corresponding azatitanacyclopentanes in quantitative yield, which in turn reacted with H₂O, I₂ and O₂ to give 2-methyl-, 2-iodomethyl-, 2-hydroxymethyl-1-aminocyclic compounds, respectively. The azatitanacyclopentanes thus generated reacted with formaldehyde to afford the corresponding 2,3-annulated pyrrolidines in good yield.     

Structure and magnetic properties of the two-dimensional ferrimagnet (NEt4)[[Mn(salen)]2Fe(CN)6]: investigation of magnetic anisotropy on a single crystal

The title compound, (NEt(4))[[Mn(salen)](2)Fe(CN)(6)] (1), was synthesized via a 1:1 reaction of [Mn(salen)(H(2)O)]ClO(4) with (NEt(4))(3)[Fe(CN)(6)] in a methanol/ethanol medium (NEt(4)(+) = tetraethylammonium cation, salen(2)(-) = N,N'-ethylenebis(salicylidene)iminate). The two-dimensional layered structure of 1 was revealed by X-ray crystallographic analysis: 1 crystallizes in monoclinic space group P2(1)/c with cell dimensions of a = 12.3660(8) A, b = 15.311(1) A, c = 12.918(1) A, beta = 110.971(4) degrees, Z = 2 and is isostructural to the previously synthesized compound, (NEt(4))[[Mn(5-Clsalen)](2)Fe(CN)(6)] (5-Clsalen(2-) = N,N'-ethylenebis(5-chlorosalicylidene)iminate; Miyasaka, H.; Matsumoto, N.; Re, N.; Gallo, E.; Floriani, C. Inorg. Chem. 1997, 36, 670). The Mn ion is surrounded by an equatorial salen quadridentate ligand and two axial nitrogen atoms from the [Fe(CN)(6)](3-) unit, the four Fe[bond]CN groups of which coordinate to the Mn ions of [Mn(salen)](+) units, forming a two-dimensional network having [[bond]Mn[bond]NC[bond]Fe[bond]CN[bond]](4) cyclic repeating units. The network is spread over the bc-plane of the unit cell, and the layers are stacked along the a-axis. The countercation NEt(4)(+) is located between the layers. Compound 1 is a ferrimagnet with T(c) = 7.7 K and exhibits hysteresis with a remnant magnetization of 13.44 cm(3).mol(-1) (M/N mu(B) = 2.4) at zero field and a coercivity of 1000 Oe when the powder sample was measured at 1.9 K. Magnetic measurements of a direction-arranged single crystal were also carried out. The orientation of the crystallographic axes of a selected single crystal was determined by X-ray analysis, and magnetization was measured when an external field was applied in the a*, b, and c directions. The magnetization in the a* direction increased more easily than those in the b and c directions below the critical temperature. No hysteresis was observed only for the measurement in the a* direction, indicating the presence of strong structural anisotropy with potential anisotropy on Mn(III) ions.