High-speed recovery of germanium in a convection-aided mode using functional porous hollow-fiber membranes

A porous hollow-fiber membrane capable of recovery of germanium from a liquid stream was prepared by radiation-induced graft polymerization of an epoxy-group-containing vinyl monomer, glycidyl methacrylate, and subsequent functionalization with 2,2'-iminodiethanol, di-2-propanolamine, N-methylglucamine, and 3-amino-1,2-propanediol. The functional group density was as high as 1.4 mol per kg of the resultant hollow fiber. The polymer chains containing functional groups surrounding the pores enabled a high-speed recovery of germanium during permeation of a germanium oxide (GeO2) solution through the pores of the hollow fiber. Because of a negligible diffusional mass-transfer resistance, germanium concentration changes with the effluent volume, i.e., breakthrough curves, overlapped irrespective of the residence time of the solution, which ranged from 0.37 to 3.7 s across the hollow fiber. After repeated use of adsorption and elution, the adsorption capacity did not deteriorate.     

syn-selective direct catalytic asymmetric Mannich-type reactions of hydroxyketones using Y{N(SiMe3)2}3/linked-BINOL complexes

[reaction, structure: see text] Chiral Y{N(SiMe3)2}3/linked-BINOL catalyst generated Y-enolate in situ from various hydroxyketones (R2 = aryl, heteroaryl). Beta-amino-alpha-hydroxy ketones (R1 = aryl, heteroaryl, alkenyl) were obtained syn-selectively (up to 96/4) in high ee (up to 98%) and good yield (up to 98% yield).     

Synthesis of conjugated oligomers having aromatic and enediyne units alternately in the backbone that show intense fluorescence emission

[structure: see text] Synthesis and fluorescence properties of pi-conjugated compounds having alternately an aromatic ring such as benzene, pyridine, and thiophene and an enediyne unit in the backbone are described.     

Generation of 360-nm ultraviolet light in first-order periodically poled bulk MgO:LiNbO3

Ultraviolet second-harmonic generation in first-order periodically poled MgO:LiNbO3 is presented. Using a high-voltage multipulse application method, we fabricated a first-order nonlinear grating with a period of 1.8 microm and depth of approximately 150 microm over 10-mm interaction length in a 1-mm-thick MgO:LiNbO3 substrate. In a single-pass configuration, continuous-wave 30-mW UV light at 362.5 nm was generated for a fundamental power of 522 mW, corresponding to a normalized conversion efficiency of 11%/W.     

Wave packet dynamics in a quasi-one-dimensional metal-halogen complex studied by ultrafast time-resolved spectroscopy

An ultrafast optical response is studied in a quasi-one-dimensional halogen-bridged mixed-valence metal complex [Pt(en)(2)] [Pt(en)2I2] (ClO4)(4) with ultrafast time resolution. Wave packet motions both in the ground and self-trapped exciton (STE) states are observed as oscillatory modulations in the time-resolved reflectivity. The wave packet motion on the STE potential surface begins after about 50 fs with respect to the photoexcitation. This delay is attributed to the lattice relaxation from the free exciton state to the STE state.     

Dispersion resulting from phase and amplitude errors in arrayed-waveguide grating multiplexers-demultiplexers

We report dispersion resulting from phase and amplitude errors in arrayed-waveguide grating (AWG) multiplexers-demultiplexers. We measure the phase- and amplitude-error distributions of two different types of AWG and discuss their effects on the dispersion. The results show that the origin of the dispersion in the AWG is the low-order Fourier components of the symmetric phase and the antisymmetric amplitude errors. We also discuss the dependence of the dispersion on the passband shape in the presence of the same fabrication errors.     

Degradation of aliphatic-aromatic copolyesters by bacteria that can degrade aliphatic polyesters

The degradation activities of bacteria that can degrade aliphatic polyesters on various aliphatic-aromatic copolyesters (PBSTIL, PBST, and Ecoflex™) were investigated. Among the bacteria examined, strain TB-71 showed the best degradation activity. An HPLC analysis of the degradation products revealed that PBST55 and Ecoflex™ are degraded into monomers by strain TB-71. In the case of PBSTIL, an unknown peak was detected by the HPLC analysis and was considered to be derived from water-soluble oligomers containing isophthalic acid segments. This finding seemed to be attributed to the chemical structure of the aromatic segments of the copolymers.