Qβ measurements of 158, 159Pm , 159, 161Sm , 160-165Eu , 163Gd and 166Tb using a total absorption BGO detector

Q _β values of the neutron-rich isotopes of ^160-165Eu and ¹⁶³Gd were measured for the first time using a total absorption bismuth germanate (BGO) detector, and previously obtained data on ^{158, 159}Pm , ^{159, 161}Sm and ¹⁶⁶Tb were re-analyzed. These radioactive sources were prepared by an on-line mass separator (Tokai-ISOL) following the ²³⁸U (p,f reaction. The deduced Q _β values are the following: 6085(80)keV for ¹⁵⁸Pm , 3805(65)keV for ¹⁵⁹Sm , 5460(140)keV for ¹⁵⁹Pm , 4705(60)keV for ¹⁶⁰Eu , 5065(130)keV for ¹⁶¹Sm , 3705(60)keV for ¹⁶¹Eu , 5575(60)keV for ¹⁶²Eu , 4690(70)keV for ¹⁶³Eu , 3170(70)keV for ¹⁶³Gd , 6430(70)keV for ¹⁶⁴Eu , 5800(120)keV for ¹⁶⁵Eu , and 4695(70)keV for ¹⁶⁶Tb . Moreover, the deduced mass excesses and two-neutron separation energies ( S _2n values) were compared with those of the atomic mass evaluations and theoretical predictions.     

Theβ + decay of the new isotope86Mo and the first observation of86m Nb

Theβ ⁺ decay of⁸⁶Mo has been firstly investigated by means ofβγ spectroscopy. The⁸⁶Mo nuclei were produced by fusion-evaporation reactions of⁵⁴ Fe (³⁵Cl, 1 p2n) and⁵⁸Ni (³²S,2p 2n) at beam energies of 103 and 120 MeV, respectively. Threeγ rays of 47.3, 49.8 and 187.0 keV were unambiguously identified to follow theβ ⁺ decay of⁸⁶Mo by results ofXγ andβγ coincidence and cross-bombardment. A half life and a maximumβ ⁺-ray energy of⁸⁶Mo were determined to be 19.6±1.1 s and 3.9±0.4 MeV, respectively. A decay scheme of⁸⁶Mo is proposed in this article. Furthermore, a decay of⁸⁶Nb has been studied using the same combinations of projectiles and targets, and a newβ-decaying isomer^86m Nb was observed with a half life of 56.3±8.3 s.     

Mechanism of the Aerobic Homocoupling of Phenylboronic Acid on Au20−: A DFT Study

The mechanism of the gold nanocluster‐catalyzed aerobic homocoupling of arylboronic acids has been elucidated by means of DFT calculations with Au₂₀^? as a model cluster for the Au:[poly(N‐vinylpyrrolidin‐2‐one)] catalyst. We found that oxygen affects the adsorption of phenylboronic acid and, by lowering the energy barrier, a water molecule enhances dissociation of the C?B bond, which is probably the rate‐determining step. The key role of oxygen is in activating the surface of the gold cluster by generating Lewis acidic sites for adsorption and activation of the phenylboronic acid, leading to the formation of biphenyl through a superoxo‐like species. Moreover, the oxygen adsorbed on the Au nanocluster can act as an oxidant for phenylboronic acid, giving phenol as a byproduct. As shown by NBO analysis, the basic aqueous reaction medium facilitates the reductive elimination process by weakening the Au?C bond, thereby enhancing the formation of biphenyl. The coupling of phenyl and reductive elimination of biphenyl occur at the top or facet site with low‐energy‐barrier through spillover of phenyl group on Au NC. The present findings are useful for the interpretation or design of other coupling reactions with Au NC.     

Gold/Palladium Alloy for Carbon–Halogen Bond Activation: An Unprecedented Halide Dependence

New catalytic activity of gold/palladium alloy nanoclusters (NCs) for carbon–halogen bond activation is demonstrated. In the case of an aryl chloride, the inclusion of gold in a bimetallic catalyst is indispensable to achieve the coupling reactions. Gold has the unique effect of stabilizing palladium, such that Pd²⁺ leached from clusters by means of spillover of chloride during oxidative addition. The thus‐formed spillover intermediate further reacts heterogeneously in both Ullmann and Suzuki‐type coupling reactions through a new type of mechanism. In the case of an aryl bromide, Ullmann coupling occurs through the spillover of bromide, similar to that of aryl chloride. However, a significant fraction of palladium also leached, which diminished the Ullmann coupling activity of the aryl bromide and, as a result, the order of reactivity was ArCl>ArBr. With regard to the activation of the C?Br bond towards a Suzuki‐type reaction, the inclusion of a higher gold content in gold/palladium clusters stabilized palladium to prevent the leaching of Pd²⁺ from the clusters by means of spillover of bromide. The spillover intermediate reacts heterogeneously with PhB(OH)₂, palladium‐rich gold/palladium, or pure palladium clusters; the oxidative addition of ArBr favors the extraction of palladium from the clusters, yielding Pd²⁺ intermediates. The extracted intermediates react homogenously (Pd^2+/Pd⁰ catalysis) with PhB(OH)₂, which results in the higher selectivity of the cross‐coupling product. An initial step to observe such unprecedented halide dependency, together with the dynamic behavior of palladium on the surface of gold is the oxidative addition of Ar?X. A detailed insight into the first oxidative addition process was also examined by quantum chemical calculations.     

Asymmetric Total Synthesis of ent‐Pyripyropene A

An asymmetric total synthesis of ent‐pyripyropene A was achieved by a convergent synthetic route. We used our originally developed Ti^III‐catalyzed radical cyclization to construct an AB‐ring portion that consisted of a trans‐decalin skeleton with five contiguous stereogenic centers. The coupling between the AB‐ring and the DE‐ring portions, and a subsequent C‐ring cyclization, led to the total synthesis of ent‐pyripyropene A. An evaluation of the insecticidal activity of ent‐pyripyropene A against two aphid species revealed that ent‐pyripyropene A was 35–175 times less active than naturally occurring pyripyropene A. This result indicated that the biological target of pyripyropene A recognizes the absolute configuration of pyripyropene A.     

Directing/Protecting‐Group‐Free Synthesis of Tetraaryl‐Substituted Pyrazoles through Four Direct Arylations on an Unsubstituted Pyrazole Scaffold

A directing/protecting‐group‐free synthesis of 1,3,4,5‐tetraaryl‐substituted pyrazoles was achieved through four transition metal‐catalyzed direct arylations. Various pyrazoles with four different aryl rings were obtained using readily available reagents from an unsubstituted pyrazole. Two aryl‐substituted pyrazoles showed intense violet fluorescence, high quantum yields (Φ_f=0.68, 0.64), and large Stokes shifts (19000, 15200 cm^?1).     

Quantum yields and quantitative spectra of firefly bioluminescence with various bivalent metal ions

We measured quantitative spectra of firefly (Photinus pyralis) bioluminescence in the presence of Zn²⁺ and other bivalent metal ions to investigate the effects of these metal ions on luciferin‐luciferase reaction. We studied the dependence of the quantum yield and spectrum on quantity and kind of bivalent metal ions. Adding various amounts of Mg²⁺, Mn²⁺ and Ca²⁺ produced virtually no change in the quantum yields or the spectra of bioluminescence. In contrast, increasing amounts of ions such as Zn²⁺ and Cd²⁺ decreased quantum yields and changed the bioluminescence color from yellow‐green to red. Quantitative analysis showed that the sensitivities of the quantum yield and color to various metal ions were in the order of Hg²⁺>Zn²⁺, Cd²⁺>Ni²⁺, Co²⁺, Fe²⁺≫Mg²⁺, Mn²⁺, Ca²⁺. We propose that the changes in quantum yield and spectrum caused by the metal ions are due to their effect on luciferase that surrounds oxyluciferin during its radioactive decay. We also found that having more metal ions accelerated bioluminescence reactions. The sensitivity of the reaction rate had no correlation with those of the quantum yield and spectrum.     

Enantioenriched synthesis of cyclopropenes with a quaternary stereocenter, versatile building blocks

Ir(salen) complexes were found to catalyze enantioselective cyclopropenation efficiently. Cyclopropenation can be carried out using either a donor/acceptor- or an acceptor/acceptor-substituted diazo compound such as α-aryl-α-diazoacetates, α-phenyl-α-diazophosphonate, 2,2,2-trifluoro-1-phenyl-1-diazoethane, and α-cyano-α-diazoacetamide as carbenoid precursors. The reactions provide highly enantioenriched cyclopropenes (84-98% ee) with a functionalized quaternary carbon as versatile building blocks.     

Synthesis and characterization of nanocrystalline MgAl2O4 spinel by polymerized complex method

Ultrafine MgAl₂O₄ powder has been synthesized by a polymerized complex method. Heating of a precursor solution containing citric acid (CA), ethylene glycol (EG) and Mg and Al salts with a molar ratio of Mg/Al/CA/EG=1/2/8/32 at 180°C produced a transparent polymeric gel, which have been characterized by FT-IR spectroscopy and TG/DTA. The organic fraction was removed by controlled thermal treatments (350–1200°C) whereby the bimetallic oxide was formed. XRD analysis showed the presence of MgAl₂O₄ at 600°C. TEM observation showed that the spherical nanosized powders with good uniformity was obtained. Furthermore, these powders showed excellent sinterability, relative density up to 99.8% was achieved when sintered at 1550°C for 3 h in air without any sintering additive.