Preparation of 4(3H)-quinazolinones from aryldiazonium salt,nitriles and 2-aminobenzoate via a cascade annulation

One-pot synthesis of 3-aryl-4(3H)-quinazolinones has been realized through a cascade annulation. Reaction of aryldiazonium salt with a nitrile provides in situ generation of a reactive nitrilium ion, which is attacked by the amino group of 2-aminobenzoate followed by cyclization to deliver the desired product. This strategy offers a convenient and easy access to a wide range of functionalized quinazolinone.     

Performance of a 80 W copper vapor laser with “alignment free” unstable CAT-EYE resonator and other configurations using intra-cavity apertures

Performance of a kinetically enhanced copper vapor laser (KE-CVL) with various stable/unstable “alignment free” CAT-EYE resonator configurations are presented here in this paper. The laser used in the experiment was a 45 mm bore (∼2 l discharge volume) kinetically enhanced copper vapor laser developed in our laboratory and capable of generating maximum power of ∼80 W (at ∼9.8 kHz). The efficiency of the laser was ∼1.4% and beam divergence of ∼3.5 mrad in a plane-plane standard multimode cavity. For the first time performance of unstable CAT-EYE resonator is demonstrated with a CVL/KE-CVL. On using unstable CAT-EYE resonator the divergence of the laser beam reduced to ∼0.22 mrad (∼20-fold reduction as compared to conventional plane-plane cavity), ∼40 W output power and with excellent misalignment tolerance. The laser output power was found to be within ∼5% drift/decline with misalignment angle of about 4 mrad between the mirrors. This is a significant improvement in comparison to standard conventional unstable resonator (M ∼ 50) CVL where ∼0.5 mrad divergence is achieved with power drift/decline of about 45% at ∼4 mrad misalignment angle.Off-axis unstable CAT-EYE unstable resonator was also demonstrated for the first time with further reduction in beam divergence to ∼0.13 mrad and with output power of ∼28 W. The misalignment tolerance was found to be highest in case of off-axis unstable CAT-EYE resonator with decline/drift in laser power of only ∼10% for misalignment angle as high as ∼8 mrad. Performance with intra-cavity apertures in plane-plane type CAT-EYE resonator for transverse mode control is also presented for the first time in CVLs. It is observed that the laser beam divergence reduces significantly to 1.25 mrad (a factor of 2) on using an aperture of ∼3.5 mm at the CAT-EYE reflector as compared to its normal (R = F = d) configuration without aperture. In case of stable CAT-EYE resonator the average beam divergence reduces from 8 mrad to 4 mrad (factor of 2) on using intra-cavity aperture of about 3 mm. It was also observed that high misalignment tolerance was retained on using intra-cavity apertures in almost all the CAT-EYE resonators. Use of intra-cavity mesh was also demonstrated for the first time with stable CAT-EYE resonator for improving the beam focus-ability. Average beam divergence was reduced by a factor of 2.5 (from 8 mrad to 3 mrad) on using intra-cavity mesh. These new configurations in CAT-EYE resonators in KE-CVLs are found to be effective in improving and controlling the laser beam divergence significantly with additional characteristic of high misalignment tolerance.     

Improved pulse schemes for separated local field spectroscopy for static and spinning samples

An improved pulse sequence for SLF experiments based on the magic sandwich (MS) scheme for homo-nuclear dipolar decoupling is proposed. The sequence incorporates a double MS, both on I and S spins and has been named as EXE-MS2. The proposed scheme which has a scaling factor of 1 is observed to be free from low intensity artifacts and provides better line-widths particularly for S spins labeled at multiple sites. The pulse sequence which has been applied on static oriented samples incorporates the EXE scheme where direct polarization of the S spin in the B(0) field is utilized in the place of polarization inversion and is observed to perform well without any loss of sensitivity while ensuring considerable reduction in rf power input into the sample. The EXE scheme has also been tested for solid samples under MAS.     

An Yb(OTf)3‐catalyzed,convergent synthesis of new pyranyl‐ and chromenyl‐substituted quinolines through an eco‐friendly approach

A one‐pot, multicomponent, convergent microwave synthesis of some new pyranyl‐ and chromenyl‐substituted quinolines has been reported. Twenty compounds were prepared by the reaction of 2‐methoxy‐3‐formyl quinoline ( 1a‐d ), malononitrile ( 2 ), and kojic acid ( 4a‐d )/1,3‐cyclohexadione or dimedone ( 6a ‐ h )/α‐ or β‐naphthol ( 8a ‐ d , 8e ‐ h ). The structures were confirmed by infrared (IR), ¹H nuclear magnetic resonance (NMR), ¹³C NMR, mass, and single‐crystal X‐ray analyses. On comparison with the use of conventional Lewis acid catalysts and various metal triflates under microwave conditions, the latter contributed to good yields, in specific use of the recyclable Yb(OTf)₃ catalyst attributed to high yields of the desired product. The protocol reported herein is solvent free, cost effective, and eco‐friendly.     

A self-assembled tetrapeptide that acts as a “turn-on” fluorescent sensor for Hg2+ ion

The tetrapeptide (Bz-$\mathrm{\Delta }$Phe(p-NPh₂)-l-DOPA(protected)-l-Phe-l-Phe-OMe was designed to incorporate seven phenyl rings so that it’s conformation, self-assembly and application in Hg²⁺ ions sensing could be studied. Peptide molecules adopted an overlapping β-turn of type III/III conformation in crystals. The peptide showed a highly selective turn-on response towards mercuric ion over other metal ions with a 10-fold enhancement in fluorescence intensity. This intensity change coupled with the selectivity of the peptide towards mercury allowed us to demonstrate simple colorimetric dip sensing of Hg²⁺ ions. The technique provides a highly selective and effective way to detect Hg²⁺ ions. The peptide also self-assembled into nanospheres with diameter ranges from 100 to 500?nm. Mercuric ion coordination enabled these peptide nanospheres to aggregate into well-defined nanoparticles. The enhanced fluorescence upon Hg²⁺ addition demonstrates that peptide scaffolds can be exploited in the development of different selective sensors.     

Crystal and molecular structure of 7-hydroxyflavone monohydrate, C14H10O3·H2O

The X-ray crystal structure of 7-hydroxyflavone monohydrate, C₁₄H₁₀O₃ · H₂O, is determined. The compound crystallizes in the monoclinic space group, P2₁/n with a = 3.801(3), b = 19.665(4), c = 16. 039(6), = 93.69(3)°, and = 0.68 mm^–1 for Z = 4. The phenyl ring of the flavone moiety is rotated 18.6(1)° out of the penzopyran plane, which is a typical value for flavones. In the crystal lattice, there are wide channels which are lined mainly by C–H groups. The water molecules enclosed in these channels are severely disordered.     

Synergy between Brønsted acid sites and Lewis acid sites

Synergy between Br?nsted acid sites and Lewis acid sites in mesoporous Al-Zr-TUD-1 was demonstrated to exist in Br?nsted acid catalysed reactions, but not in Lewis acid catalysed reactions.     

Anchoring of histidine-tagged proteins to molecular printboards: self-assembly, thermodynamic modeling, and patterning

In this paper the multivalent binding of hexahistidine (His6)-tagged proteins to beta-cyclodextrin (beta-CD) self-assembled monolayers (SAMs) by using the nickel(II) complex of a hetero-divalent orthogonal adamantyl nitrilotriacetate linker (4) is described. Nonspecific interactions were suppressed by using monovalent adamantyl-hexa(ethylene glycol) derivative 3. With the mono-His6-tagged maltose binding protein (His6-MBP), thermodynamic modeling based on surface plasmon resonance (SPR) titration data showed that the MBP molecules in solution were linked, on average, to Ni.4 in 1:1 stoichiometry. On the surface, however, the majority of His(6)-MBP was complexed to surface-immobilized beta-CDs through three Ni.4 complexes. This difference is explained by the high effective beta-CD concentration at the surface and is a new example of supramolecular interfacial expression. In a similar adsorption scheme, SPR proved that the alpha-proteasome could be attached to beta-CD SAMs in a specific manner. Patterning through microcontact printing of (His6)4-DsRed-fluorescent timer (DsRed-FT), which is a tetrameric, visible autofluorescent protein, was carried out in the presence of Ni.4 Fluorescence measurements showed that the (His6)4-DsRed-FT is bound strongly through Ni.4 to the molecular printboard.     

Control of porosity geometry in amino acid derived nanoporous materials

Substitution of the pillaring ligand in the homochiral open-framework [Ni(2)(L-asp)(2)(bipy)] by extended bipy-type ligands leads to a family of layer-structured, homochiral metal-organic frameworks. The 1D channel topology can be modified by the nature of the organic linker, with shape, cross-section and the chemical functionality tuneable. In addition, the volume of these channels can be increased by up to 36 % compared to the parent [Ni(2)(L-asp)(2)(bipy)]. The linker 1,4-dipyridylbenzene (3rbp) gives access to a new layered homochiral framework [Ni(2)(L-asp)(2)(3rbp)] with channels of a different shape. In specific cases, non-porous analogues with the linker also present as a guest can be activated to give porous materials after sublimation. Their CO(2) uptake shows an increase of up to 30 % with respect to the parent [Ni(2)(L-asp)(2)(bipy)] framework.