Growth and characterization of sodium pentaborate [Na(H4B5O10)] single crystals

The bulk single crystals of sodium pentaborate [Na(H4B5O10)] were grown by slow evaporation solution growth technique using deionized water as solvent. The grown crystal was confirmed by single crystal X-ray diffraction studies. The structural perfection of the grown crystals has been analyzed by high resolution X-ray diffraction (HRXRD) studies by recording rocking curve. The photoluminescence (PL), UV-vis spectral studies were performed and the optical bandgap of the material was calculated. The presence of the functional groups was identified by FT-IR measurement. The factor group analysis was done on Na(H4B5O10) to reveal the vibrational optical modes. The thermal and mechanical properties of the grown crystal were studied by TG-DTA and Vickers microhardness tester, respectively. The dielectric behavior of Na(H4B5O10) was investigated with different frequencies and temperatures.     

Advancing MXene Electrocatalysts for Energy Conversion Reactions: Surface,Stoichiometry, and Stability

MXenes, due to their tailorable chemistry and favourable physical properties, have great promise in electrocatalytic energy conversion reactions. To exploit fully their enormous potential, further advances specific to electrocatalysis revolving around their performance, stability, compositional discovery and synthesis are required. The most recent advances in these aspects are discussed in detail: surface functional and stoichiometric modifications which can improve performance, Pourbaix stability related to their electrocatalytic operating conditions, density functional theory and advances in machine learning for their discovery, and prospects in large scale synthesis and solution processing techniques to produce membrane electrode assemblies and integrated electrodes. This Review provides a perspective that is complemented by new density functional theory calculations which show how these recent advances in MXene material design are paving the way for effective electrocatalysts required for the transition to integrated renewable energy systems.     

Anchoring of histidine-tagged proteins to molecular printboards: self-assembly, thermodynamic modeling, and patterning

In this paper the multivalent binding of hexahistidine (His6)-tagged proteins to beta-cyclodextrin (beta-CD) self-assembled monolayers (SAMs) by using the nickel(II) complex of a hetero-divalent orthogonal adamantyl nitrilotriacetate linker (4) is described. Nonspecific interactions were suppressed by using monovalent adamantyl-hexa(ethylene glycol) derivative 3. With the mono-His6-tagged maltose binding protein (His6-MBP), thermodynamic modeling based on surface plasmon resonance (SPR) titration data showed that the MBP molecules in solution were linked, on average, to Ni.4 in 1:1 stoichiometry. On the surface, however, the majority of His(6)-MBP was complexed to surface-immobilized beta-CDs through three Ni.4 complexes. This difference is explained by the high effective beta-CD concentration at the surface and is a new example of supramolecular interfacial expression. In a similar adsorption scheme, SPR proved that the alpha-proteasome could be attached to beta-CD SAMs in a specific manner. Patterning through microcontact printing of (His6)4-DsRed-fluorescent timer (DsRed-FT), which is a tetrameric, visible autofluorescent protein, was carried out in the presence of Ni.4 Fluorescence measurements showed that the (His6)4-DsRed-FT is bound strongly through Ni.4 to the molecular printboard.     

Insecticidal activity of a novel fatty acid amide derivative from Streptomyces species against Helicoverpa armigera

Helicoverpa armigera, an important pest causes serious damage to grain legumes. The main objective of this study was to isolate and identify the metabolite against H. armigera from a previously characterised Streptomyces sp. CAI-155. The culture filtrate of CAI-155 was extracted using Diaion HP-20 and the active fractions were fractionated on Silica and C18 column chromatography. The C18 active fraction was further fractionated on Silica gel 60 F₂₅₄ thin layer chromatography (TLC). The most active fraction (Rf 0.64) purified from TLC led to the identification of a novel metabolite N-(1-(2,2-dimethyl-5-undecyl-1,3-dioxolan-4-yl)-2-hydroxyethyl)stearamide by spectral studies. The purified metabolite showed 70–78% mortality in 2nd instar H. armigera by diet impregnation assay, detached leaf assay and greenhouse assay. The LD₅₀ and LD₉₀ values of the purified metabolite were 627 and 2276 ppm, respectively. Hence, this novel metabolite can be exploited for pest management in future.     

Oxygen-release/storage properties of Ce0.5M0.5O2 (M = Zr, Hf) oxides: interplay of crystal chemistry and electronic structure

Fluorite-type Ce0.5Zr0.5O2 and Ce0.5Hf0.5O2 have been synthesized by a solution combustion route, and their oxygen release and reduction have been investigated up to 850 degrees C. On reduction, the zirconium system forms two pyrochlore phases, Ce2Zr2O7 (pyrochlore-I) and Ce2Zr2O6.2 (pyrochlore-II), while the hafnium system forms only a disordered fluorite phase with the composition Ce0.5Hf0.5O1.77, under the same experimental conditions. The crystal structures of the reduction products have been characterized by powder X-ray diffraction and Rietveld refinement, and their electronic structures have been investigated by photoelectron spectroscopy and electrical conductivity measurements. Pyrochlore-I (a = 10.6727(4) A) is a semiconductor, while pyrochlore-II (a = 10.6463(8) A) is a good conductor (with a nearly temperature independent resistivity of approximately 2.5 ohm.cm in the 400-1000 K range). X-ray photoelectron spectroscopy (XPS) shows an admixture of Ce(5d,6s) with Zr(4d) and O(2p) and a significant density of states near EF in the highly reduced pyrochlore-II phase. The changes have been rationalized in terms of a qualitative energy band scheme that brings out the special role of zirconium vis-à-vis hafnium in the reduction/oxygen release properties of Ce0.5Zr0.5O2 and Ce0.5Hf0.5O2.     

Directed formation of micro- and nanoscale patterns of functional light-harvesting LH2 complexes

The precision placement of the desired protein components on a suitable substrate is an essential prelude to any hybrid "biochip" device, but a second and equally important condition must also be met: the retention of full biological activity. Here we demonstrate the selective binding of an optically active membrane protein, the light-harvesting LH2 complex from Rhodobacter sphaeroides, to patterned self-assembled monolayers at the micron scale and the fabrication of nanometer-scale patterns of these molecules using near-field photolithographic methods. In contrast to plasma proteins, which are reversibly adsorbed on many surfaces, the LH2 complex is readily patterned simply by spatial control of surface polarity. Near-field photolithography has yielded rows of light-harvesting complexes only 98 nm wide. Retention of the native optical properties of patterned LH2 molecules was demonstrated using in situ fluorescence emission spectroscopy.     

Ferroelectric liquid crystalline polysiloxanes containing a naphthalene moiety

The synthesis and thermal properties of side-chain liquid-crystalline polysiloxanes containing a naphthalene moiety are described. The hydrosilylation of the monomers (ω-alkenenaphthoic acid derivatives) with poly(hydrogenmethylsiloxane) resulted in the desired ferroelectric polymers. Two series of polymers were prepared using two slightly different core unit structures. Preliminary results of optical polarising microscopy and differential scanning calorimetric investigations are reported. The polymers show smectic A and chiral smectic C phases.     

8‐(2‐Bromo‐3‐methoxy‐3‐methylbutyl)‐7‐methoxycoumarin

The title compound, C₁₆H₁₉BrO₄, is a derivative of osthol, isolated from the seeds of Imperatoria Osthruthium. The structure was solved in space group P, with two mol­ecules in the asymmetric unit, and was refined to a final R factor of 0.064. The two mol­ecules in the asymmetric unit differ in the orientation of their brominated substituent group. The benzo­pyran ring displays aromatic character. The packing of the mol­ecules in the lattice is mainly due to C—H⋯O hydrogen bonds.     

Application of combined Monte Carlo and molecular dynamics method to simulation of dipalmitoyl phosphatidylcholine lipid bilayer

We describe a new equilibration procedure for the atomic level simulation of a hydrated lipid bilayer. The procedure consists of alternating molecular dynamics trajectory calculations in a constant surface tension and temperature ensemble with configurational bias Monte Carlo moves to different regions of the configuration space of the bilayer, in a constant volume and temperature ensemble. The procedure is described in detail and is applied to a bilayer of 100 molecules of dipalmitoyl phosphatidylcholine (DPPC) and 3205 water molecules. We find that the hybrid simulation procedure enhances the equilibration of the bilayer as measured by the convergence of the area per molecule and the segmental order parameters, as compared with a simulation using only molecular dynamics (MD). Progress toward equilibration is almost three times as fast in CPU time, compared with a purely MD simulation. Equilibration is complete, as judged by the lack of energy drift in three separate 200-ps runs of continuous MD started from different initial states. Results of the simulation are presented and compared with experimental data and with other recent simulations of DPPC. ©1999 John Wiley & Sons, Inc. J Comput Chem 20: 1153–1164, 1999