Studies on ion-pair and triple-ion formation of some tetraalkylammonium salts in binary solvent mixtures of benzene and tetrahydrofuran at 298.15 K

Conductivities of some tetraalkylammonium halides, viz. tetrabutylammonium bromide (Bu₄NBr), tetrapentylammonium bromide (Pen₄NBr), tetrahexylammonium bromide (Hex₄NBr) and tetraheptylammonium bromide (Hep₄NBr) were measured at 298.15 K in THF + C₆H₆ mixtures with 10, 20, 30 and 40 mass% of C₆H₆. A minimum in the conductance values was observed as concentration increases, which dependent both on the salt and the solvent. The observed molar conductivities were explained by the formation of ion-pairs (M⁺ + X⁻ ↔ MX, K_P) and triple-ions (2 M⁺ + X⁻ ↔ M₂X⁺; M⁺ + 2X⁻ ↔ MX₂⁻, K_T). A linear relationship between the triple-ion formation constants [log(K_T/K_P)] and the salt concentrations at the minimum conductivity (log C_min) was given for all salts in C₆H₆ + THF mixtures. The formation of triple-ions might be attributed to the ion sizes in solutions in which coulombic interactions and covalent bonding forces act as the main forces between the ions (R₄N⁺ X⁻).     

Uncompensated magnetization in the layered molecular antiferromagnet {N(n-C5H11)4[MnFe(ox)3]}∞

Studies on the magnetic properties of the molecular antiferromagnetic material {N(n-C₅H₁₁)₄[Mn^IIFe^III(ox)₃]}_∞, carried out by various physical techniques (AC/DC magnetic susceptibility, magnetization, heat capacity measurements and Mössbauer spectroscopy) at low temperatures, have been presented. Different experimental observations complement each other and provide a clue for the observation of an uncompensated magnetization below the Néel temperature and short-range correlations persisting high above T_N. It is understood that the honeycomb layered structure of the compound contains non-equivalent magnetic sub-lattices, (Mn^II–ox–Fe^III_A–...) and (Mn^II–ox–Fe^III_B–...), where different responses of the Fe^III_A and Fe^III_B spin sites towards an external magnetic field might be responsible for the observation of the uncompensated magnetization in this compound at T < T_N. The present magnetic system is an S = 5/2 2-D Heisenberg antiferromagnet system with the intralayer exchange parameter J/k_B = −3.29 K. A very weak interlayer exchange interaction was anticipated from the spin wave modeling of the magnetic heat capacity for T < 0.5T_N. The positive sign of the coupling between the layers has been concluded from the Mössbauer spectrum in the applied magnetic field. Frustration in the magnetic interactions gives rise to the uncompensated magnetic moment in this compound at low temperatures.     

Influence of isomerization on nonlinear optical properties of molecules

The influence of rotational and geometrical isomerism on the nonlinear optical (NLO) properties, specifically the first-order hyperpolarizability beta, of chromophores of current interest has been investigated with density functional theory (DFT). In the first of this two-part study, the rotational isomerism of a linear chromophore was explored. Calculation of the torsion potentials about two of the rotatable and conformation-changing single bonds in a chromophore demonstrated the near equality of the molecular energies at 0 degrees and 180 degrees rotational angles. To explore the consequences of this near conformational energy degeneracy to NLO behavior, the eight low energy rotational isomers of FTC [Robinson, B. H.; et al. Chem. Phys. 1999, 245, 35] were investigated. This study provides the first-reported DFT-based calculation of the statistical mechanical average of beta over the conformational space of a molecule having substantial nonlinear optical behavior. The influence of the solvent reaction field on rotameric populations and on the beta tensor is reported. In the second part, two molecules having two donors and two acceptors bonded respectively in ortho and meta positions on a central benzene ring are shown to have substantially different beta tensors. These two so-called molecular Xs have different highest occupied molecular orbital to lowest unoccupied molecular orbital (HOMO-LUMO) distributions, and consistent with expectations, it is found that the larger beta(zzz) is associated with a large spatial asymmetry between the HOMOs and LUMOs. Large hyperpolarizability correlates with the HOMO concentrated on the donor groups and the LUMO on the acceptor groups.     

Atomic force microscopy measurement of heterogeneity in bacterial surface hydrophobicity

The structure and physicochemical properties of microbial surfaces at the molecular level determine their adhesion to surfaces and interfaces. Here, we report the use of atomic force microscopy (AFM) to explore the morphology of soft, living cells in aqueous buffer, to map bacterial surface heterogeneities, and to directly correlate the results in the AFM force-distance curves to the macroscopic properties of the microbial surfaces. The surfaces of two bacterial species, Acinetobacter venetianus RAG-1 and Rhodococcus erythropolis 20S-E1-c, showing different macroscopic surface hydrophobicity were probed with chemically functionalized AFM tips, terminating in hydrophobic and hydrophilic groups. All force measurements were obtained in contact mode and made on a location of the bacterium selected from the alternating current mode image. AFM imaging revealed morphological details of the microbial-surface ultrastructures with about 20 nm resolution. The heterogeneous surface morphology was directly correlated with differences in adhesion forces as revealed by retraction force curves and also with the presence of external structures, either pili or capsules, as confirmed by transmission electron microscopy. The AFM force curves for both bacterial species showed differences in the interactions of extracellular structures with hydrophilic and hydrophobic tips. A. venetianus RAG-1 showed an irregular pattern with multiple adhesion peaks suggesting the presence of biopolymers with different lengths on its surface. R. erythropolis 20S-E1-c exhibited long-range attraction forces and single rupture events suggesting a more hydrophobic and smoother surface. The adhesion force measurements indicated a patchy surface distribution of interaction forces for both bacterial species, with the highest forces grouped at one pole of the cell for R. erythropolis 20S-E1-c and a random distribution of adhesion forces in the case of A. venetianus RAG-1. The magnitude of the adhesion forces was proportional to the three-phase contact angle between hexadecane and water on the bacterial surfaces.     

Langmuir-Blodgett films of 9-phenyl anthracene molecules incorporated into different matrices

This communication reports the surface pressure (pi) versus area per molecule (A) isotherm characteristics of the mixed films of 9-phenyl anthracene (PA) in stearic acid (SA) and polymethyl methacrylate (PMMA) matrices, at the air-water interface. The mixed Langmuir films at the air-water interface have been observed to be easily transferred onto solid substrates to form uniform Langmuir-Blodgett films. By changing various parameters, namely molefraction, surface pressure of lifting and number of layers, the mixed Langmuir-Blodgett (LB) films of various types have been fabricated successfully and their spectroscopic characteristics have been reported. From the isotherm characteristics and the area per molecule versus molefraction plot, it is evident that the PA molecules are successfully incorporated into mixed Langmuir-Blodgett films. UV-vis absorption spectroscopic study of the mixed LB films at various molefractions of PA in two different matrices reveal that formation of I-type aggregate in PMMA matrix whereas both I- and H-type aggregates are playing their dominant role in SA matrix. Moreover, fluorescence spectroscopic study reveals reabsorption effect. Molecular movement persists in the freshly prepared LB films, as is evident from the time dependent changes in both UV-vis absorption and fluorescence spectra of the mixed LB films in both matrices. From our observation it is evident that about 200 h is required to get the LB films in a stable condition. Dimers and higher order n-mers are formed at a higher surface pressure of 30 mNm(-1).     

Transient streaming potential in a finite length microchannel

Pressure-driven flow of an electrolyte solution in a microchannel with charged solid surfaces induces a streaming potential across the microchannel. Such a flow also causes rejection of ions by the microchannel, leading to different concentrations in the feed and permeate reservoirs connecting the capillary, which forms the basis of membrane based separation of electrolytes. Modeling approaches traditionally employed to assess the streaming potential development and ion rejection by capillaries often present a confusing picture of the governing electrochemical transport processes. In this paper, a transient numerical simulation of electrochemical transport process leading to the development of a streaming potential across a finite length circular cylindrical microchannel connecting two infinite reservoirs is presented. The solution based on finite element analysis shows the transient development of ionic concentrations, electric fields, and the streaming potential over the length of the microchannel. The transient analysis presented here resolves several contradictions between the two types of modeling approaches employed in assessing streaming potential development and ion rejection. The simulation results show that the streaming potential across the channel is predominantly set up at the timescale of the developing convective transport, while the equilibrium ion concentrations are developed over a considerably longer duration.     

A two pass heuristic algorithm for scheduling ‘blocked out’ units in continuous process industry

This paper addresses the problem of scheduling cascaded ‘blocked out’ continuous processing units separated by finite capacity storage tanks. The raw materials for the product lines arrive simultaneously on the input side of the first unit. But every unit can process only one product line at a time, thus giving rise to the possibility of spillage of raw material due to limited storage capacity. The need to process multiple product lines and the added constraint of multiple intermediate upliftment dates aggravate the problem. This problem is quite common in petrochemical industry. The paper provides a MINLP (Mixed Integer Non-Linear Programming) formulation of the problem. However, for any realistic scheduling horizon, the size of the problem is too large to be solved by standard packages. We have proposed a depth first branch and bound algorithm, guided by heuristics, to help planners in tackling the problem. The suggested algorithm could output near optimal solutions for scheduling horizons of 30 time periods when applied to real life situations involving 3 units and 3 product lines. Preliminary version of the paper appeared in the proceedings of MISTA, 2005.     

Period adding bifurcation in a logistic map with memory

We introduce a single step memory dependence in the fully chaotic logistic map. This makes it a two dimensional system in general. However, we show that by using composite functions to define two one dimensional maps, it is possible to obtain some analytic results for the bifurcation structure. Numerical results support the calculated bifurcation scheme and, in addition, yield a further insight which allows the calculation of the convergence ratio for a new period adding scenario.