Preparation and characterization of biodegradable poly(ε-caprolactone)-based gel polymer electrolyte films

Biodegradable polymer electrolyte films based on poly(ε-caprolactone) (PCL) in conjunction with lithium tetrafluoroborate (LiBF₄) salt and 1-ethyl-3-methylimidazolium tetrafluoroborate (EMIMBF₄) ionic liquid were prepared by solution cast technique. The structural, morphological, thermal, and electrical properties of these films were examined using X-ray diffraction (XRD), optical microscopy (OM), differential scanning calorimetry (DSC), and impedance spectroscopy. The XRD and OM results reveal that the pure PCL possesses a semi-crystalline nature and its degree of crystallinity decreases with the addition of LiBF₄ salt and EMIMBF₄ ionic liquid. DSC analysis indicates that the melting temperature and enthalpy are apparently lower for the 40 wt% EMIMBF₄ gel polymer electrolyte as compared with the others. The ambient temperature electrical conductivity increases with increasing EMIMBF₄ concentration and reaches a high value of ～2.83?×?10^?4 S cm^?1 for the 85 PCL:15 LiBF₄ + 40 wt% EMIMBF₄ gel polymer electrolyte. The dielectric constant and ionic conductivity follow the same trend with increasing EMIMBF₄ concentration. The dominant conducting species in the 40 wt% EMIMBF₄ gel polymer electrolyte determined by Wagner’s polarization technique are ions. The ionic conductivity of this polymer electrolyte (～2.83?×?10^?4 S cm^?1) should be high enough for practical applications.     

Effect of Ni content on the diffusion-controlled growth of the product phases in the Cu(Ni)–Sn system

A strong influence of Ni content on the diffusion-controlled growth of the (Cu,Ni)₃Sn and (Cu,Ni)₆Sn₅ phases by coupling different Cu(Ni) alloys with Sn in the solid state is reported. The continuous increase in the thickness ratio of (Cu,Ni)₆Sn₅ to (Cu,Ni)₃Sn with the Ni content is explained by combined kinetic and thermodynamic arguments as follows: (i) The integrated interdiffusion coefficient does not change for the (Cu,Ni)₃Sn phase up to 2.5 at.% Ni and decreases drastically for 5 at.% Ni. On the other hand, there is a continuous increase in the integrated interdiffusion coefficient for (Cu,Ni)₆Sn₅ as a function of increasing Ni content. (ii) With the increase in Ni content, driving forces for the diffusion of components increase for both components in both phases but at different rates. However, the magnitude of these changes alone is not large enough to explain the high difference in the observed growth rate of the product phases because of Ni addition. (iv) Kirkendall marker experiments indicate that the Cu₆Sn₅ phase grows by diffusion of both Cu and Sn in the binary case. However, when Ni is added, the growth is by diffusion of Sn only. (v) Also, the observed grain refinement in the Cu₆Sn₅ phase with the addition of Ni suggests that the grain boundary diffusion of Sn may have an important role in the observed changes in the growth rate.     

3,3′-Benzene-1,4-diylbis[1-(substituted)phenylprop-2-en-1-one] derivatives: A new class of materials for third-order nonlinear optical applications

We have investigated the third-order nonlinear optical parameters of Bischalcones embedded in DMF solution and in solid PMMA matrix, by Z-scan technique using nanosecond laser pulse trains at 532 nm. Z-scan results reveal that the Bischalcones exhibits negative nonlinear refractive index as high as 10⁻¹¹ esu. The molecular two-photon absorption cross-section of Bischalcones were of the order 10⁻⁴⁶ cm⁴ s/photon, which is nearly two orders of magnitude larger than that of Rhodamine 6G which is 10⁻⁴⁸ - 10⁻⁵⁰ cm⁴ s/photon. We found that, the two-photon absorption (TPA) is the dominating nonlinear process leading to nonlinear absorption in both the cases in solution and as well as in solid medium. Based on TPA process, the Bischalcones exhibit good optical power limiting of nanosecond laser pulses at the input wavelength. The nonlinear optical parameters found to increase on enhancing the strength of the electron donor groups indicating the dependence and importance of electron donor/acceptor units on third-order nonlinear optical susceptibility χ⁽³⁾.     

DFT study on the effect of relative positions of methyl-, nitro- and N→oxide groups on the molecular structure,thermal/kinetic stability,crystal density,heat of decomposition and performance characteristics of triazolones

Methyl-, nitro- and N→oxide substituted triazolones are of interest in the contest of high-energy density compounds and have been found to have true local energy minima at the B3LYP/aug-cc-pVDZ level. The optimised structures, harmonic frequencies and thermodynamic values for all the model molecules have been obtained in their ground state. The velocity of detonation (D) and detonation pressure (P) have been evaluated by the Kamlet–Jacob equations using the crystal density and the heat of explosion. The estimated performance properties are higher (D = 9.92–10.27 km/s, P = 48.10–52.52 GPa) compared with 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (D = 9.20 km/s, P = 42.0 Gpa). The higher densities are possibly due to the intramolecular hydrogen bonds and the layered structures in the crystal lattice. We speculate that the calculated heat of explosion and the density are for the gas phase compounds and in the reality they should be for the solid phase which would diminish the magnitude of the calculated values. The –N→O and –NO₂ group leads to the desirable consequences of higher heat of explosion and diminished sensitivities. The substituting of N–H hydrogen atom(s) of triazolones for a –CH₃ group decreases melting point, heat of formation and density; however, the methyl group increases the thermal stability.     

Toward an ideal integrating nephelometer

The Integrating Sphere Integrating Nephelometer is a novel and unique reciprocal nephelometer that uses an integrating sphere with attached truncation-reduction tubes to contain the sample volume and to integrate the scattered light. Its main advantage compared with current integrating nephelometers is a sevenfold reduction in truncation angle, which reduces errors in measured scattering from large particles. Additional features include improved sampling efficiency for large particles and a well-defined operating wavelength.     

Spectroscopic Investigation of Tungsten Ions in Lead Scandium Phosphate Glass System

Lead scandium phosphate glasses (PbO-Sc₂O₃-P₂O₅) containing different concentrations of tungsten oxide (WO₃) ranging from 0 to 5 mol% were prepared. A number of studies, viz. differential thermal analysis (DTA), infrared spectra, optical absorption, and electron spin resonance (ESR) spectra, have been carried out. The results of DTA indicated the highest glass forming ability for the glass containing 5 mol% of WO₃. The results of spectroscopic studies have been analyzed in light of different oxidation states of tungsten ions.     

Chemical synthesis and magnetic properties of HCP and FCC nickel nanoparticles

In this study, we successfully synthesized single-phase hexagonal closed packed (HCP) and face-centered cubic (FCC) nickel nanoparticles via reduction of nickel nitrate hexahydrate and nickel acetate tetrahydrate, respectively, in polyethylene glycol-200. Structural information of the as-synthesized nickel nanoparticles are studied by X-ray diffraction (XRD) as a function of the molar concentration of the nickel precursor. XRD results reveal that low concentrations of nickel precursor (0.005?M and below) favor the HCP, while high concentrations favor the mixture of HCP and FCC crystal structures. Particle size of HCP structure is found in the range of ～15?nm via transmission electron microscope analysis. Vibratory sample magnetometer is employed to study its magnetic behavior and the results reveal that FCC crystalline phase shows ferromagnetic nature with high saturation magnetization (M _s?～?39.6?emu?gm^?1) as compared to metastable HCP crystalline structure (M _s?～?2?emu?gm^?1). The surfactants bonding on the surface of nickel nanoparticles are studied.     

Synthesis of multiwall carbon nanotubes by chemical vapor deposition of ferrocene alone

Multiwall carbon nanotubes (MWNTs) filled with Fe nanoparticles (NPs) have been synthesized by thermal chemical vapor deposition of ferrocene alone as the precursor. The MWNTs were grown at different temperatures: 980 and 800 ^°C. Characterization of as-prepared MWNTs was done by scanning and transmission electron microscopy, and X-ray diffraction. The transmission electron microscopy study revealed that Fe NPs encapsulated in MWNTs grown at 980 and 800 ^°C are spherical and rod shaped, respectively. Room-temperature vibrating sample magnetometer studies were done on the two samples up to a field of 1 T. The magnetization versus magnetic field loop reveals that the saturation magnetization for the two samples varies considerably, almost by a factor of 4.6. This indicates that Fe is present in different amounts in the MWNTs grown at the two different temperatures.     

Thermal conductance of nanofluids: is the controversy over?

Over the last decade nanofluids (colloidal suspensions of solid nanoparticles) sparked excitement as well as controversy. In particular, a number of researches reported dramatic increases of thermal conductivity with small nanoparticle loading, while others showed moderate increases consistent with the effective medium theories on well-dispersed conductive spheres. Accordingly, the mechanism of thermal conductivity enhancement is a hotly debated topic. We present a critical analysis of the experimental data in terms of the potential mechanisms and show that, by accounting for linear particle aggregation, the well established effective medium theories for composite materials are capable of explaining the vast majority of the reported data without resorting to novel mechanisms such as Brownian motion induced nanoconvection, liquid layering at the interface, or near-field radiation. However, particle aggregation required to significantly enhance thermal conductivity, also increases fluid viscosity rendering the benefit of nanofluids to flow based cooling applications questionable.     

Simultaneous velocity and temperature measurements in gaseous flow fields using the VENOM technique

We present an initial demonstration of simultaneous velocity and temperature mapping in gaseous flow fields using a new nitric oxide planar laser-induced fluorescence-based method. The vibrationally excited NO monitoring (VENOM) technique is an extension of two-component velocimetry using vibrationally excited NO generated from the photodissociation of seeded NO(2) [Appl. Opt. 48, 4414 (2009)], where the two sequential fluorescence images are obtained probing two different rotational states to provide both velocity and temperature maps. Comparisons to computational fluid dynamics simulations show that the initial VENOM measurements provide good velocity and temperature maps in the relatively high-density regions of the flow, where the rms uncertainties are approximately 5% for velocity and 9% for temperature.