Amine-templated metal squarates

Two layered amine-templated cobalt squarates, [C₆N₂H₁₄]₂[Co₂(C₄O₄)₃(H₂O)₄], I, and [C₃N₂H₅]₂[Co₂(C₄O₄)₃(H₂O)₄], II, have been prepared under hydrothermal conditions. Both I and II contain chains formed by dimers comprising two cobalt atoms bound to the squarate units, the chains being connected through hydrogen bond interactions. An amine-templated cobalt squarate of the formula [C₄N₂H₁₂][Co(C₄O₄)₂(H₂O)₄][H₂O]₂, III, as well as its Ni, Zn and Cd analogues have been prepared by room temperature reactions. III has a layered architecture wherein the cobalt-squarate monomers are linked by the amine molecules. Co and Zn analogues of [Ni(C₄O₄)(H₂O)₂(C₃N₂H₄)] with ligating imidazole units have also been prepared and characterized.     

Non-isothermal thermogravimetric pyrolysis kinetics of waste petroleum refinery sludge by isoconversional approach

Pyrolysis of petroleum refinery sludge has received global acclamation as a clean conversion technique for providing solution of sludge disposal as well as efficient resource utilization. This communication reports the kinetics study of pyrolysis of petroleum refinery sludge. Experiments were carried out by means of thermogravimetric analysis at different heating rates of 5, 10 and 20°C min⁻¹. The pyrolytic reaction is significant in the temperature range of 200–350°C and analysis and evaluation of kinetic parameters is done in the 100–500°C region of non-isothermal TG curves obtained in nitrogen atmosphere. The activation energy is calculated by iso-conversional method, then other kinetic parameters are determined by considering single reaction and two reaction global kinetic model. Two-reaction model is found to fit satisfactorily the experimental results.     

High resolution protein separations using affinity ultrafiltration with small charged ligands

Although the feasibility of affinity ultrafiltration was demonstrated more than 20 years ago, commercial applications have not developed due to the high cost and practical limitations of the large macroligands needed for highly selective separations. The objective of this study was to examine the use of small charged affinity ligands for protein purification by exploiting electrostatic interactions between the charged complex and an electrically-charged membrane. Experiments were performed using bovine serum albumin and ovalbumin with Cibacron Blue as the affinity ligand. Negatively charged versions of a composite regenerated cellulose membrane were generated by covalent attachment of a sulfonic acid functionality. Binding experiments were used to identify appropriate conditions for protein separations. The selectivity for the separation of BSA and ovalbumin was a function of the solution conditions, Cibacron Blue concentration, and membrane charge, with the addition of Cibacron Blue causing a 30-fold increase in selectivity. A diafiltration process was performed at the optimal conditions, giving a BSA product with a purification factor of more than 90-fold and a yield greater than 90%. These results clearly demonstrate the potential of using a small charged affinity ligand for high resolution protein separations.     

Preparation and thermal stability of trioxalatocobaltates of bivalent metals KM2+ [Co(C2O4)3]·xH2O

Trioxalatocobaltates of bivalent metals KM²⁺[Co(C₂O₄)₃]·x H₂O, with M²⁺ = Ba, Sr, Ca and Pb, have been prepared, characterized and their thermal behaviour studied. The compounds decompose to yield potassium carbonate, bivalent metal carbonate or oxide and cobalt oxide as final products. The formation of the final products of decomposition is influenced by the surrounding atmosphere. Bivalent metal cobaltites of the types KM²⁺CoO₃ and M²⁺CoO_3—x are not identified among the final products of decomposition. The study brings out the importance of the decomposition mode of the precursor in producing the desired end products.     

Novel simulated moving-bed adsorber for the fractionation of gas mixtures

The separation of propylene-propane mixture is an energy intensive operation commercially practiced using cryogenic distillation. The separation by pressure swing adsorption has been studied as an alternative. A fixed-bed pressure swing adsorption yields the heavy component as a pure product. The product recovery and the productivity are not high. In a moving-bed process, because of the counter-current solid-gas contact, the separation achieved is similar to that of the fractionation by distillation. Although the moving-bed operation offers the upper limit for the performance of a cyclic adsorptive process, due to mechanical complexities in the handling of solids the 'simulated' moving-bed is preferred. By moving the inlet and outlet ports of streams located along the length of the bed, a moving-bed process can be realized in a fixed bed. We describe here a 'moving-port' system which permits injection or withdrawal of the fluid along the axial direction in a fixed bed. A fixed bed embedded with the moving-port systems emulates a simulated moving-bed adsorber. The proposed adsorber can fractionate a binary gas mixture into two product streams with high purities. It is similar to the Sorbex process of UOP but does not have the eluent as an additional separating agent. A parametric study indicates that high purity products and a higher productivity by an order of magnitude can be achieved with simulated moving-beds compared to the fixed beds.     

An electrochemical investigation on (MoO<Subscript>3</Subscript>+PVP+PVA) nanobelts for lithium batteries

Molybdenum trioxide (MoO₃) xerogel films modified with poly(vinyl alcohol)+poly(vinyl pyrrolidone) (PVP+PVA) polyblends were obtained by ion-exchange method with sol-gel technique. Investigations were conducted using X-ray “diffractometry”, Fourier transform infrared spectroscopy, and cyclic voltammetry. The results show that the H atoms in polyblend are H-bonded with the O atoms in the Mo=O bonds of MoO₃ xerogel, which effectively shield the electrostatic interaction between MoO₃ interlayer and Li⁺ ions when MoO₃ xerogel is modified by the intercalation of (PVP+PVA). The reversibility of the insertion/extraction of Li⁺ ions is greatly improved by the modification with polyblend of MoO₃ nanocomposite films. MoO₃ and (PVP+PVA) _x MoO₃ (x = 0, 0.5) nanobelts were obtained by a simple hydrothermal process from MoO₃ sol. The electrochemical cells with configuration Li/(LiPF₆+EC+DMC)/MoO₃ modified by (PVP+PVA) were fabricated and their discharge profiles studied.     

A mild deprotection strategy for allyl-protecting groups and its implications in sequence specific dendrimer synthesis

A mild deprotection strategy for allyl ethers under basic conditions in the presence of a palladium catalyst is described. Under these conditions, aryl allyl ethers can be cleaved selectively in the presence of alkyl allyl ethers. These conditions are also effective in the deprotection of allyloxycarbonyl groups. The utility of the current methodology in sequence specific dendrimer synthesis is demonstrated.     

Synthesis of some benzimidazole- and benzothiazole-derived ligand systems and their precursory diacids

Procedures are described for the preparation of various bidentate and linear tetradentate benzimidazoles and benzothiazoles incorporating units such as pyridyl and thioether, and for the preparation of certain thioether dicarboxylic acids precursory to them. Condensations of ortho-functinal anilines with carboxylic acids were carried out in polyphosphoric acid or refluxing HCl solution. Syntheses are reported for: [HO₂C(CH₂)2S(CH₂)₂]₂X (X = O, S), 1,9-bis(benzimidazol-2-yl)-2,5,8-trithianonane, 1,11-bis(N-methylbenzimidazol-2-yl)-3,6,9-trithiaundecane, 1,11-bis(2-benzimidazol-2-yl)-6-oxo-3,9-dithiaundecane, 2-(2-pyridyl)benzothiazole, 2,6-bis(benzothiazol-2-yl)pyridine, 2-(2-pyridyl)-N-methylbenzimidazole, 2-(2-pyridylmethyl)benzimidazole and 2-(N-methyl-2-piperidyl)benzimidazole. The compounds were characterized, where appropriate, by their mass, uv and ¹H-nmr spectra.     

Indium-mediated allylation/propargylation of α-diazoketones: a facile synthesis of 1-bromo-2-alkyl- or 2-arylpent-4-en-2-ols

α-Diazoketones undergo smooth allylation with successive bromide insertion with allylindium bromide generated in situ from allyl bromide and indium metal to produce 1-bromo-2-alkyl- or 2-arylpent-4-en-2-ols in high yields. Addition of propargylindium bromide produces 1-bromo-2-alkyl-or 2-arylpent-4-yn-2-ols under similar conditions.