Observation of negative charge trapping and investigation of its physicochemical origin in newly synthesized poly(tetraphenyl)silole siloxane thin films

A new kind of organic-inorganic hybrid polymer, poly(tetraphenyl)silole siloxane, was invented and synthesized for realization of its unique charge trap properties. The organic portions consisting of (tetraphenyl)silole rings were responsible for negative charge trapping, while the Si-O-Si inorganic linkages provided the intrachain energy barrier for controlling electron transport. The polysilole siloxane dielectric thin films were fabricated by spin-coating and curing of the polymers, followed by characterization with spectroscopic ellipsometry (SE), near edge X-ray absorption fine structure spectroscopy (NEXAFS), and photoemission spectroscopy (PES). The abrupt increase in density and decrease in thickness of the thin film at a curing temperature of 100 °C was attributed to a thermodynamically preferred state in the nanoscopic arrangement of the polymer chains; this was due to cofacial π-π interactions in a skewed manner between peripheral phenyl groups of the (tetraphenyl)silole rings of the adjacent polymer chains. Using the NEXAFS spectrum to assess high electron affinity, the LUMO energy level of the dielectric thin film cured at 150 °C was positioned 1 eV above the Fermi energy level (E(F)). The electron trapping of the dielectric thin films was confirmed from the positive flat band shift (ΔV(FB)) in the capacitance-voltage (C-V) measurements performed within the metal-insulator-semiconductor (MIS) device structure, which strongly verified the polymer design concept. From the simple kinetics model of the electron transport, it was proposed that the flat band shift (ΔV(FB)) or trap density of the negative charges (|ρ|) was logarithmically proportional to the decay constant (β) for the electron-tunneling process. When a phenyl group of a silole ring in a polymer chain was inserted into the two available phenyl groups of another silole ring in another polymer chain, the electron transfer between the groups was enhanced, decreasing the trap density of the negative charges (|ρ|). For the thermodynamically preferred state generating the high refractive index, the distance between the two phenyl groups of the adjacent polymer chains was estimated to be in the range of 0.27-0.36 nm.     

Simultaneous multiresidue determination of 48 pesticides in Yeongsan and Sumjin River water using GC-NPD and confirmation via GC-MS

In a continuation of our earlier work, a multiresidual analytical method using 48 frequently used neutral pesticides in a water matrix was developed and validated in this study. The samples were extracted with dichloromethane and the pesticides were analyzed via GC-NPD followed by confirmation with GC-MS. Good linearity was detected over a concentration range of 0.01-1.0 microg/mL with correlation coefficients (r(2) ) in excess of 0.982. The recoveries were measured between 70.7 and 111.4% for the majority of the targeted pesticides with relative standard deviations (RSDs) of less than 20%. The LODs and LOQs were in ranges of 0.1-2 and 0.33-6.6 microg/L, respectively. A total of 66 water samples were collected from different locations in Yeongsan and the Sumjin River, Republic of Korea, and were analyzed in accordance with the developed method. None of the water samples were determined to contain any of the targeted pesticides. The method has been shown to be simpler, faster, and more cost-effective than the method established by the Environmental Protection Agency (EPA).     

Control of on-off or off-on fluorescent and optical [Cu²⁺] and [Hg²⁺] responses via formal Me/H substitution in fully characterized thienyl "scorpionate"-like BODIPY systems

One 8-phenyl and two 8-mesityl-substituted "scorpionate"-like BODIPY-type species of the formula [3,4,4-tris(5-R-(2-thienyl))-8-(2,4,6-R'-phenyl)-4-bora-3a,4a-diaza-s-indacene (R = H, R' = H, 3a; R, = H, R' = Me, 2a; R, = Me, R' = Me, 2b)] have been synthesized and fully characterized. Importantly, differences in their solution (MeCN) optical Cu(2+) and Hg(2+) probing capacity via SSS-chelation were investigated. Compounds 2a-3a were prepared from the requisite 8-substituted BODIPY complexes. They were characterized first by complete (1)H, (11)B and (13)C NMR spectroscopic assignments (CD(3)Cl or CD(3)C(O)CD(3)); the molecular structures of 2a and 3a were determined by X-ray crystallography. Compounds 2a-3a were studied by UV-vis and fluorescence spectroscopy [Φ(F) = 0.27 ± 0.013 (2a); 0.024 ± 0.0016 (2b); 0.0034 ± 0.00047 (3a)]. Importantly, low [Cu(2+)] with 3a (<3.0 × 10(-5) M) gave rise to an increase of fluorescence intensity (off-on; 6.3-fold), whereas with 2a it decreased (on-off). When [Hg(2+)] (<3.0 × 10(-5) M) was added to 2b, the λ(em,max) value increased (off-on; 3.2-fold), and for 2a, it decreased (on-off). The association constant (K(a)) for Hg(2+)·2a was determined to be 3120 ± 307 M(-1). An approximate stoichiometric 1:1 binding determined by Job plot analysis is in line with successful DFT modeling of SSS-Cu(2+) binding for this system type. (1)H NMR spectroscopy also revealed tentative sets of product complex peaks. These simple differences caused by formal ligand Me-group incorporation are the first for any related fluorophores, to the best of our knowledge.     

Tunable wetting mechanism of polypyrrole surfaces and low-voltage droplet manipulation via redox

This paper presents the experimental results and analyses on a controlled manipulation of liquid droplets upon local reduction and oxidation (redox) of a smart polymer-dodecylbenzenesulfonate doped polypyrrole (PPy(DBS)). The electrochemically tunable wetting property of PPy(DBS) permitted liquid droplet manipulation at very low voltages (-0.9 to 0.6 V). A dichloromethane (DCM) droplet was flattened upon PPy(DBS) reduction. It was found that the surface tension gradient across the droplet contact line induced Marangoni stress, which caused this deformation. Further observation of PPy(DBS)'s color change upon the redox process confirmed that the surface tension gradient was the driving force for the droplet shape change.     

Qualitative and quantitative determination of polyacetylenes in different Bupleurum species by high performance liquid chromatography with diode array detector and mass spectrometry

Polyacetylenes are main toxic ingredients in Bupleurum longiradiatum, a poisonous plant that has ever been misused as substitutes for Chaihu (Bupleuri Radix). For the first time, a high-performance liquid chromatography method coupled with diode array detector and mass spectrometry (HPLC-DAD-MS) was developed for qualitative and quantitative analysis of nine polyacetylenes in Bupleurum species. All references, including two new polyacetylenes, were isolated from B. longiradiatum and purified using a semi-preparation HPLC chromatography. The analysis was performed on a TSKgel ODS-100V C18 column (3 μm, 150 mm x 4.6 mm i.d.) using a gradient system of acetonitrile and water, with diode array detection (254 nm). The method was validated for linearity, precision, accuracy, limit of detection and quantification. A total of 27 Bupleurum samples were examined with this method, which showed a great variety in the distribution and contents of the polyacetylenes. It was found that polyacetylenes (1-8) were the main ingredients in B. longiradiatum, while a few kinds of polyacetylenes (5-8) were also identified in B. smithii, B. smithii var. parvifolium, B. bicaule and B. angustissimum. However, no polyacetylenes (1-9) were detected in the authentic Chaihu samples and the other Bupleurum species. The results indicated that the toxic B. longiradiatum could readily be distinguished from other medicinal Bupleurum species based on the polyacetylene profiles, and the guidelines and quality control of polyacetylenes for Chaihu are useful. The acute toxicity of the ethanol extract of B. longiradiatum and its fractions was also investigated.     

Influence of Preparation Conditions on Structural Stability of Ordered Mesoporous Carbons Synthesized by Evaporation-induced Triconstituent Co-assembly Method

Various ordered mesoporous carbons (OMCs) have been prepared by evaporation-induced triconstituent co-assembly method. Their mesostructural stability under different carbon content, aging time and acidity were conveniently monitored by X-ray diffraction, transmis-sion electron microscopy, and N₂ sorption isotherms techniques. The results show mesostruc-tural stability of OMCs is enhanced as the carbon content increases from 36% to 46%, further increasing carbon content deteriorates the mesostructural stability. Increasing aging time from 0.5 h to 5.0 h make the mesostructural stability go through an optimum (2.0 h) and gradually reduce framework shrinkage of the OMCs. Highly OMCs can only be obtained in the acidity range of 0.2～1.2 mol/L HCl, when the acidity is near the isoelectric point of silica, the resulting OMCs have the best mesostructure stability. Under the optimum condi-tion, the carbon content of 46%, aging time of 2.0 h, and 0.2 mol/L HCl, the resulting OMCs have the best mesostructure stability and the highest BET surface areas of 2281 m²/g.