13CH4分子v3振动带空气和氮气加宽系数温度依赖性研究

采用中红外波段连续可调谐二极管激光器和自行研制的低温吸收池, 测量了温度为296 K, 252 K, 213 K, 173 K时, 3.38 μm附近¹³CH₄分子的四条跃迁谱线的氮气和空气加宽光谱; 首次通过实验获得空气和氮气对¹³CH₄分子的碰撞加宽系数, 以及谱线加宽系数的温度依赖系数. 实验过程中, 利用Voigt线型对所测量的光谱进行拟合. 实验结果表明, 氮气和空气对¹³CH₄分子的碰撞诱导加宽系数随温度的降低而增大; 相同温度下, 氮气对¹³CH₄分子的碰撞加宽系数普遍大于空气加宽系数. 实验数据为地球和外星体大气遥感探测提供了依据.     

丁酮分子内价轨道1a″的电子动量谱学研究

用高分辨率电子动量谱仪进行丁酮分子的结合能谱和内价轨道1a″电子动量谱的实验工作，以及用Hartree-Fock和密度泛函理论方法对1a″轨道电子动量谱的理论研究. 得到了各价轨道的电离能值以及理论计算的总能、偶极矩和1a″轨道的二维密度图. 并比较了内价轨道1a″的电子动量谱的实验和理论计算结果，实验结果与理论计算符合较好.     

碳纳米管锁模双包层光纤激光器的实验研究

本文采用双包层掺镱光纤作为增益介质,用单壁碳纳米管作为饱和吸收体,获得最高输出功率为336 mW的锁模脉冲激光.用飞秒激光诱导水击穿法直接在单模光纤上制备出D形区,通过在D形光纤上滴涂单壁碳纳米管溶液,成功制备出碳纳米管饱和吸收体,并对其饱和吸收特性进行测试,发现其调制深度为27％.利用该饱和吸收体作为锁模器件,制备出具有环形腔结构的锁模光纤激光器.当抽运功率为4W时,获得了脉宽为93.8 fs,中心波长为1083.8 nm,3 dB谱宽为8.6 nm,重复频率为5.59 MHz,平均功率为336 mW的飞秒脉冲激光输出.     

An effective method for evaluating the image-sticking effect of TFT-LCDs by interpretative modelling of optical measurements

The conventional method of evaluating the image-sticking effect of a LCD module is inspection by sight, because the residual optical difference between two stressing areas is small and viewing angle-dependent, so that it is difficult to obtain a significant optical difference value by instrumental measurement. We propose an effective method for evaluating the image-sticking effect of a TFT-LCD module by directly measuring its time evolution of transmission with the TFT glass turned off after a period of pattern stress. In this way, the liquid crystal system under charge equilibrium in constant-charge mode shows a dramatically amplified optical difference. Further, we interpret the measured results by a modelling that combines the calculation of liquid crystal director orientation and ionic charge distribution. It is supposed that there are four time constants that dominate the overall sticking phenomenon and belong to four transient processes: adsorption of ions, desorption of free ions, desorption of stuck ions, and TFT leakage. The modelling shows good accordance between measured and simulated results when fitting parameters are properly chosen.     

A Silicon Nanowire‐Based Electrochemical Sensor with High Sensitivity and Electrocatalytic Activity

A new kind of silicon nanowire (SiNWs)‐based nanoelectrode assembly, a gold‐nanoparticle‐decorated silicon nanowire array (AuNPs@SiNWsAr), is employed for the construction of high‐performance electrochemical sensors. Significantly, the electrochemical nanosensors are capable of sensitive detection of various electroactive molecules (e.g., dopamine (DA), ascorbic acid (AA), hydrogen peroxide (H₂O₂), and glucose). Further, DA molecules loaded on the surface of AuNPs@SiNWsAr preserve stable high electroactivity overnight without special protection, while free DA molecules may lose their biological activity due to severe oxidization in ambient environment. These findings may offer new opportunities for the design of high‐performance electrochemical nanosensors with high sensitivity and robust stability.     

The effect of differently sized Ag catalysts on the fabrication of a silicon nanowire array using Ag-assisted electroless etching

A simple and low cost method to generate single-crystalline, well-aligned silicon nanowires (SiNWs) of large area, using Ag-assisted electroless etching, is presented and the effect of differently sized Ag catalysts on the fabrication of SiNWs arrays is investigated. The experimental results show that the size of the Ag catalysts can be controlled by adjusting the pre-deposition time in the AgNO₃/HF solution. The optimum pre-deposition time for the fabrication of a SiNWs array is 3 min (about 162.04 ± 38.53 nm Ag catalyst size). Ag catalysts with smaller sizes were formed in a shorter pre-deposition time (0.5 min), which induced the formation of silicon holes. In contrast, a large amount of Ag dendrites were formed on the silicon substrate, after a longer pre-deposition time (4 min). The existence of these Ag dendrites is disadvantageous to the fabrication of SiNWs. Therefore, a proper pre-deposition time for the Ag catalyst is beneficial to the formation of SiNWs.SiNWs were synthesized in the H₂O₂/HF solution system for different periods of time, using Ag-assisted electroless etching (pre-deposition of the Ag catalyst for 3 min). The length of the SiNWs increases linearly with immersion time. From TEM, SAED and HRTEM analysis, the axial orientation of the SiNWs is identified to be along the [001] direction, which is the same as that of the initial Si wafer. The use of HF may induce Si–H_x bonds onto the SiNW array surface. Overall, the Ag-assisted electroless etching technique has advantages, such as low temperature, operation without the need for high energy and the lack of a need for catalysts or dopants.     

Mn12-Ac磁性分子团簇单晶的热重-差热分析与结构转变

通过热重-差热分析(TG-DTA)，考察了Mn12-Ac磁性分子晶体从室温到270℃的热失重过程.结合x射线粉末衍射分析，认为在第一个失重阶段，即25—110℃，Mn12-Ac失去了处于团簇分子间隙的结晶乙酸和结晶水，同时失去了团簇分子中与4个Mn3+配位的4个H2O，Mn12-Ac单晶结构被破坏，但是团簇分子的基本结构依然存在；在第二个失重阶段，即180—230℃，Mn12-Ac转变为γ-Mn2O3，其中混有少量Mn3O4. 关键词： Mn12 分子团簇 热重-差热分析 x射线衍射     

用来激励高频超声换能器的电激励源

讨论了超声换能器的几种激励方法，分析了三种常用激励方法在激励高频超声换能器时的特点及其同局限性，我们雪崩ＭＡＲＸ电路制作的单极窄脉冲能地激励率高达１００ＭＨｚ的换能器并取得了较好的结果。     

Bi2O3-B2O3-BaO玻璃的制备及其近红外发光性能的研究

采用高温熔融法制备了xBi₂O₃-50B₂O₃-(50-x)BaO玻璃, 测定了样品玻璃的近红外光区的发射谱、荧光寿命以及Raman光谱. 在808 nm波长光的激发下, 50Bi₂O₃-50B₂O₃二元玻璃中未观察到近红外发光; 随体系中BaO的加入, 当x为40, 45以及49时, 玻璃样品中观察到了近红外宽带发光现象; BaO含量进一步增加, 当x=10–30时, 近红外发光现象消失; 而当玻璃中Bi浓度很低时, 在0.5Bi₂O₃-50B₂O₃-50BaO及1Bi₂O₃-50B₂O₃-50BaO玻璃中发现了近红外发光现象, 且存在多个发光峰. 对铋离子近红外发光机理进行了初步的探讨.     

四氯苯醌与嘧啶类核酸碱基的光化学氢抽取和电子转移反应

采用纳秒时间分辨的激光闪光光解实验技术,研究了四氯苯醌(TCBQ)分子与两种嘧啶核酸碱基(胸腺嘧啶和尿嘧啶)分子在355nm激发下的光化学反应动力学. 355 nm将TCBQ分子布居到激发三重态³TCBQ^*,高反应活性的³TCBQ^*与碱基分子发生两个平行的反应,氢抽取反应和电子转移反应,分别对应生成瞬态光谱上观测到的两个光反应产物TCBQH·和TCBQ·^-. 这两个反应同时生成的碱基自由基和碱基阳