Comparative study on the synthesis, photoluminescence and application in InGaN-based light-emitting diodes of TAG:Ce phosphors

Cerium-doped terbium aluminum garnet phosphors, Tb₃Al₅O₁₂:Ce³⁺ (TAG:Ce³⁺), were prepared with different methods: co-precipitation (CP), half dry-half wet (HDHW), sol-combustion (SC) and Pechini method plus conventional solid state reaction (SS) method. Comparative study on the phase-formation, particle size, morphologies and luminescent characteristics of the phosphors synthesized with different methods was carried out by means of XRD, FE-SEM and photoluminescence (PL) analysis and SC method was confirmed by the comparison of the results to be an easy and an effective process for preparing efficient and nano-sized Tb₃Al₅O₁₂:Ce³⁺ phosphors. Various factors influencing particle size, morphology and PL of the phosphors, such as precursor preparation, reaction temperature and heating time, were also investigated. Light-emitting diodes (LEDs) were fabricated with each phosphor and a ∼460 nm emitting InGaN chip. The LEDs from SS, HDHW and CP exhibit strong white emission while those from SC and Pechini emit yellow, revealing that the emission characteristics of LEDs are influenced not only by the morphology and the particle size of the phosphors, but also by the preparing process of the phosphors.     

Surface Characterization of Sepiolite by Inverse Gas Chromatography

Inverse gas chromatography (IGC) was applied to characterize the surface of sepiolite. The adsorption thermodynamic parameters (the standard enthalpy (ΔH ⁰), entropy (ΔS ⁰) and free energy of adsorption (ΔG ⁰)), the dispersive component of the surface energy (γ _S ^d ), and the acid/base character of sepiolite surface were estimated by using the retention time of different non-polar and polar probes at infinite dilution region. The specific free energy of adsorption (ΔG ^sp ), the specific enthalpy of adsorption (ΔH ^sp ), and the specific entropy of adsorption (ΔS ^sp ) of polar probes on sepiolite were determined. ΔH ^sp were correlated with the donor and modified acceptor numbers of the probes to quantify the acidic K _A and the basic K _D parameters of the sepiolite surface. The values obtained for the parameters K _A and K _D indicated an acidic character for sepiolite surface.     

Locally enhanced relative humidity for scanning probe nanolithography

The formation of a water meniscus between a sharp tip and a solid surface is one of the prevailing requirements for scanning probe microscope (SPM)-based lithographies, such as dip-pen nanolithography (DPN) and conductive tip induced oxidation. The water meniscus functions as a medium for the oxidation of or mass transfer to the solid surface. Here we report a simple, efficient, and effective approach to enhance the local relative humidity and thus increase the size of the water meniscus by bringing a water-containing capillary tube to the proximity of the tip-surface contact area. The enhancement in local relative humidity is confirmed via an increase in the measured tip-surface adhesion forces and the widths of DPN generated parallel lines. Compared to the global control of relative humidity for the whole lithography system, the short distance between the "water reservoir" and the tip-surface contact area enables rapid increase in the local vapor pressure of water, less perturbation, and minimal erosion to the state-of-the-art electronics. As a result, most scanning probe lithography experiments at high relative humidity can now be performed in a reasonable time frame.     

Photocatalytic degradation of methylene blue on Fe3+-doped TiO2 nanoparticles under visible light irradiation

Fe³⁺-doped TiO₂ composite nanoparticles with different doping amounts were successfully synthesized using sol-gel method and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and ultravioletvisible spectroscopy (UV-Vis) diffuse reflectance spectra (DRS). The photocatalytic degradation of methylene blue was used as a model reaction to evaluate the photocatalytic activity of Fe³⁺/TiO₂ nanoparticles under visible light irradiation. The influence of doping amount of Fe³⁺ (ω: 0.00%–3.00%) on photocatalytic activities of TiO₂ was investigated. Results show that the size of Fe³⁺/TiO₂ particles decreases with the increase of the amount of Fe³⁺ and their absorption spectra are broaden and absorption intensities are also increased. Doping Fe³⁺ can control the conversion of TiO₂ from anatase to rutile. The doping amount of Fe³⁺ remarkably affects the activity of the catalyst, and the optimum efficiency occurs at about the doping amount of 0.3%. The appropriate doping of Fe³⁺ can markedly increase the catalytic activity of TiO₂ under visible light irradiation. __________ Translated from Journal of Northwest Normal University (Natural Science), 2006, 42(6): 55–56 [译自: 西北师范大学学报(自然科学版)]     

真珠钙驱铅实验研究

研究了真珠钙驱铅效果，给亚急性中毒的大鼠服用后，可增加铅从尿中排量，降低骨中蓄积量，对防治铅中毒有一定作用。     

两组份互穿网络聚合物的合成研究

以蓖麻油聚氨酯和聚醚聚氨酯的不同重量比与光敏剂、催化剂、稀释剂、促进剂所组成的多相体系为反应物,分别在紫外光照射和加热的条件下合成网络Ⅰ和网络Ⅱ的互穿网络聚合物(IPN)。改变网络Ⅱ聚醚聚氨酯中各组份的摩尔比制得系列样品。红外光谱,应力-应变曲线和动态力学性能测定发现,样品的力学性能与两组份重量比和网络Ⅱ中不同组成都存在着一定关系。这些结果,为该体系IPN的合成和应用提供了一定依据。     

Ion Association of Cadmium Acetate from Conductivity Measurements

Conductivity of cadmium acetate over the concentration range of 10^?4 to 10^?3M was measured at 25°C. The approximate dissociation constant of CdAc₂ in dilute aqueous solution was estimated from the relation, α=[Λ?36.5+39√C(1+2α)]/[57.9?93√C(1+2α)]. The limiting value of log₁₀K for the association constant of CdAc⁺ ion was evaluated to be 1.75 at 25°C.     

Novel dye-attached macroporous films for cadmium, zinc and lead sorption: Alkali Blue 6B-attached macroporous poly(2-hydroxyethyl methacrylate)

Alkali Blue 6B-attached poly(2-hydroxyethyl methacrylate) (poly(HEMA)) microporous films were investigated as chelate forming sorbents for heavy metal removal. Poly(HEMA) microporous films were prepared by UV-initiated photo-polymerization of HEMA in the presence of an initiator (azobisisobutyronitrile (AIBN)). Alkali Blue 6B was attached covalently. These films with a swelling ratio of 58%, and carrying 14.8 mmol Alkali Blue 6B m(-2) which were then used in the removal of Cd(II), Zn(II) and Pb(II) from aqueous media. Adsorption rates were very high, equilibrium was achieved in about 30 min. The maximum adsorption of heavy metal ions onto the Alkali Blue 6B-attached films were 41.4 mmol m(-2) for Cd(II), 52.4 mmol m(-2) for Zn(II), and 64.5 mmol m(-2) for Pb(II). When the heavy metal ions competed during the adsorption from a mixture the adsorption values for Cd(II), Zn(II) and Pb(II) were quite close. Heavy metal ions were desorbed by using 0.1 M HNO(3). A significant amount of the adsorbed heavy metal ions (up to 95%) could be desorbed in 30 min. Repeated adsorption/desorption cycles showed the feasibility of these novel dye-attached microporous films for heavy metal removal.     

Observations on clear solution silicalite-1 growth by nanoslabs

Several research groups have reported the presence of nanometer-sized particles (nanoslabs) in clear solutions, which precipitate the crystalline MFI (ZSM-5) structure. Debate about the growth mechanism for Al-free ZSM-5 (silicalite-1) has revolved around growth by small silicate units (monomers, dimers, etc.) from solution vs growth by nanoslab addition. A model developed for precipitation of uniform sized colloids by addition of sub-colloidal precursor units has been adapted for this zeolite synthesis system. Parameter values were adjusted for the simulation results to match experimental observations from work reported previously, at least to the extent possible. The model involved the simultaneous solution of up to 6000 ordinary differential equations, and required computation times of up to 24 h. The results shed light on the crystal growth mechanism, but pose questions for further investigations of the nucleation mechanism.     

芥子气模拟剂2-氯乙基乙基硫醚的光催化降解

利用连续流动微反、原位红外和GC/MS等手段考察了芥子气模拟剂2-氯乙基乙基硫醚（2-CEES）在P25 TiO2上的光催化降解反应,证实CO2和H2O是这个反应的最终产物.详细的跟踪分析表明,除了CO2和H2O外,在反应的气相混合物中可检测到C2H4、CH3CHO、CH4、CO、HCl和H2S；少量小分子的羧酸、醚和砜；微量C2H5SC2H5、C2H5S2C2H5、C2H5SC2H4Cl和CH2ClCH2Cl等中间产物;在反应后的催化剂表面可检测到C2H5S2C2H5、C2H5SC2H4OH、C4H9S2C2H5和C2H5S2C2H4OH、等物.根据这些结果提出了2-CEES光催化降解的反应机理,推断2-CEES的光催化降解涉及脱氯、C－S键断裂、有机硫化物光聚合和裂解等复杂过程最终转化为CO2和H2O.认为各种硫物种在表面的积聚引起了催化剂的缓慢失活.