Comprehensive inter‐laboratory calibration of reference materials for δ18O versus VSMOW using various on‐line high‐temperature conversion techniques

Internationally distributed organic and inorganic oxygen isotopic reference materials have been calibrated by six laboratories carrying out more than 5300 measurements using a variety of high‐temperature conversion techniques (HTC) a in an evaluation sponsored by the International Union of Pure and Applied Chemistry (IUPAC). To aid in the calibration of these reference materials, which span more than 125‰, an artificially enriched reference water (δ¹⁸O of +78.91‰) and two barium sulfates (one depleted and one enriched in ¹⁸O) were prepared and calibrated relative to VSMOW2 b and SLAP reference waters. These materials were used to calibrate the other isotopic reference materials in this study, which yielded:

Synthesis and anticholinesterase activity of some new fluorogenic analogues of organophosphorus nerve agents

Eighteen new fluorogenic analogues of organophosphorus nerve agents were synthesised and characterised. They included analogues of tabun, sarin, cyclosarin, soman, VX, and Russian VX, with the 7-oxy-4-methylcoumarin or 7-oxy-4-(trifluoromethyl)coumarin leaving group. These analogues inhibited acetylcholinesterase (AChE) effectively in vitro and therefore have potential as tools for the identification of novel organophosphatases in biological systems. Analogues of VX and Russian VX with the 7-amino-4-methylcoumarin group, although poor AChE inhibitors, may have utility for screening enzyme libraries for phosphoramidases capable of cleaving P-N bonds.     

Synthesis, NMR characterisation and X-ray structures of mixed chalcogenido PNP ligands containing tellurium: crystal structures of SeiPr2PNP(H)iPr2 and [NaN(EPiPr2)2]infinity (E = Se, Te)

Reaction of HN(PiPr2)2 with one equivalent of selenium in hexane at room temperature yields the monoselenide as the P-H tautomer Se=PiPr2-N=P(H)iPr2 (2b). Deprotonation of 2b with n butyllithium in the presence of TMEDA at -78 degrees C followed by addition of tellurium produces the air-sensitive, mixed chalcogenido complex [(TMEDA)Li(SePiPr2)(TePiPr2)N] (8Li) in >97% purity after recrystallisation. Similarly, deprotonation of Te=PiPr2-N=P(H)iPr2 (2c), followed by addition of sulfur, gives the sulfur analogue [(TMEDA)Li(SPiPr2)(TePiPr2)N] (7Li) in >99% purity. The symmetrical complexes [(TMEDA)Li(SePiPr2)2N] (4Li) and [(TMEDA)Li(TePiPr2)2N] (5Li) are produced by similar methods. Compounds 2b, 4Li, 5Li, 7Li and 8Li were characterised in solution by multinuclear (1H, 31P, 77Se and 125Te) NMR spectroscopy and their solid-state structures were determined by X-ray crystallography. The X-ray crystal structures of the polymeric chains [NaN(EPiPr2)2]infinity (4Na, E = Se and 5Na, E = Te) are also reported.     

Electrochemical origin of voltage-controlled molecular conductance switching

We have studied electron transport in bipyridyl-dinitro oligophenylene-ethynelene dithiol (BPDN) molecules both in an inert environment and in aqueous electrolyte under potential control, using scanning tunneling microscopy. Current-voltage (IV) data obtained in an inert environment were similar to previously reported results showing conductance switching near 1.6 V. Similar measurements taken in electrolyte under potential control showed a linear dependence of the bias for switching on the electrochemical potential. Extrapolation of the potentials to zero switching bias coincided with the potentials of redox processes on these molecules. Thus switching is caused by a change in the oxidation state of the molecules.     

Conductive-matrix-mediated alkaline Fe(III/VI) charge transfer: three-electron storage, reversible super-iron thin film cathodes

An extended conductive matrix facilitates a 100-fold enhancement in charge storage for reversible Fe(III/VI) super-iron thin films. These films were deposited, by electrochemical reduction of Na2FeO4, with an intrinsic high capacity 3 e- cathodic storage of 485 mAh g(-1). Whereas 3 nm Fe(III/VI) films exhibited a high degree of reversibility (throughout 100 charge/discharge cycles), thicker films had been increasingly passive toward the Fe(VI) charge transfer. Films were alternatively deposited on either smooth or on extended conductive matrixes composed of high-surface-area Pt, Ti, and Au and probed galvanostatically and via cyclic voltammetry. A 100 nm Fe(VI) cathode, on the extended conductive matrixes, sustained 100-200 reversible three-electrode charge/discharge cycles, and a 19 nm thin film cathode sustained 500 such cycles. With a metal hydride anode, full cell storage was probed, and a 250 nm super-iron film cathode film sustained 40 charge/discharge cycles, and a 25 nm film was reversible throughout 300 cycles. Fe(VI) salts exhibit higher cathodic capacity and environmental advantages, and the films are of relevance toward the next generation charge storage chemistry for reversible cathodes.     

Solvent-free synthesis of metal complexes

Avoiding the use of solvents in synthesis can reduce environmental contamination and even be more convenient than using solvent-based synthesis. In this tutorial review we focus on recent research into the use of mechanochemistry (grinding) to synthesise metal complexes in the absence of solvent. We include synthesis of mononuclear complexes, coordination clusters, spacious coordination cages, and 1-, 2- and 3-dimensional coordination polymers (metal organic frameworks) which can even exhibit microporosity. Remarkably, in many cases, mechanochemical synthesis is actually faster and more convenient than the original solvent-based methods. Examples of solvent-free methods other than grinding are also briefly discussed, and the positive outlook for this growing topic is emphasised.     

Organic-acid effect on the structures of a series of lead(II) complexes

An investigation into the dependence of coordination polymer architectures on organic-acid ligands is reported on the basis of the reaction of Pb(NO3)2 and eight structurally related organic-acid ligands in the presence or absence of N-donor chelating ligands. Eight novel lead(II)-organic architectures, [Pb(adip)(dpdp)]2 1, [Pb(glu)(dpdp)] 2, [Pb(suc)(dpdp)] 3, [Pb(fum)(dpdp)] . H2O 4, [Pb2(oba)(dpdp)2] . 2(dpdp).2(NO3).2H2O 5, [Pb2(1,4-bdc)2(dpdp)2] . H2O 6, [Pb(dpdc)(dpdp)] 7, and [Pb(1,3-bdc)(dpdp)] . H2O 8, where dpdp = dipyrido[3,2-a:2',3'-c]-phenazine, H2adip = adipic acid, H2glu = glutaric acid, H2suc = succinic acid, H2fum = fumaric acid, H2oba = 4,4'-oxybis(benzoic acid), 1,4-H2bdc = benzene-1,4-dicarboxylic acid, H2dpdc = 2,2'-diphenyldicarboxylic acid, and 1,3-H2bdc = benzene-1,3-dicarboxylic acid, were successfully synthesized under hydrothermal conditions through varying the organic-acid linkers and structurally characterized by X-ray crystallography. Compounds 1-8 crystallize in the presence of organic-acid linkers as well as secondary N-donor chelating ligands. Diverse structures were observed for these complexes. 1 and 5 have dinuclear structures, which are further stacked via strong pi-pi interactions to form 2D layers. 2-3 and 6-8 feature chain structures, which are connected by strong pi-pi interactions to result in 2D and 3D supramolecular architectures. Compound 4 contains 2D layers, which are further extended to a 3D structure by pi-pi interactions. A systematic structural comparison of these 8 complexes indicates that the organic-acid structures have essential roles in the framework formation of the Pb(II) complexes.     

Liquid chromatography/tandem mass spectrometry analysis of chloramphenicol in cooked crab meat

A liquid chromatography/tandem mass spectrometry (LC/MS/MS) method is described for the extraction, cleanup, determination, and confirmation of chloramphenicol (CAP) in cooked crab meat. The method involves pulverization of cooked crab meat with dry ice; extraction of the CAP into ethyl acetate (EtOAc); evaporation (by N2) of the EtOAc; addition of methanol, aqueous NaCl, and heptane; extraction of the lipids into the heptane, followed by extraction of the aqueous phase with EtOAc; evaporation (by N2) of the EtOAc; dissolution into methanol-water; filtration; and separation/detection/confirmation using LC/MS/MS. Crab meat was fortified at 0.25, 0.50, and 1.0 ng/g (ppb) chloramphenicol. Average absolute recoveries were 67, 84, and 86%, respectively, with relative standard deviation values all less than 1%. Four daughter ions (m/z 152, 176, 194, and 257) were monitored off the m/z 321 precursor ion. Determination was based on a standard curve using the peak areas of the m/z 152 daughter ion (the base peak) for standard solutions equivalent to 0.10, 0.20, 0.50, and 1.0 ppb in tissue (made with control crab extract). A set of 6 matrix controls (unfortified crab meat) was also analyzed, in which no chloramphenicol was detected. For identification purposes, the ion ratios (of each daughter ion versus the base daughter ion) of the fortified crab versus those of the chloramphenicol standards agreed within 10% (relative) at fortified chloramphenicol concentrations of 0.25-1.0 ppb.     

Intramolecular Fluorocyclizations of Unsaturated Carboxylic Acids with a Stable Hypervalent Fluoroiodane Reagent

A new class of fluorinated lactones was prepared by the intramolecular fluorocyclizations of unsaturated carboxylic acids by using the stable fluoroiodane reagent in combination with AgBF₄. This unique reaction incorporates a cyclization, an aryl migration, and a fluorination all in one step. The fluoroiodane reagent, prepared easily from fluoride, can also be used without a metal catalyst to give moderate yields within just 1 hour, thus demonstrating that it is a suitable reagent for developing new ¹⁸F‐labelled radiotracers for PET imaging.     

Combined Experimental and Computational Investigations of Rhodium‐Catalysed CH Functionalisation of Pyrazoles with Alkenes

Detailed experimental and computational studies have been carried out on the oxidative coupling of the alkenes C₂H₃Y (Y=CO₂Me ( a ), Ph ( b ), C(O)Me ( c )) with 3‐aryl‐5‐R‐pyrazoles (R=Me ( 1 a ), Ph ( 1 b ), CF₃ ( 1 c )) using a [Rh(MeCN)₃Cp*][PF₆]₂/Cu(OAc)₂ ? H₂O catalyst system. In the reaction of methyl acrylate with 1 a , up to five products ( 2 aa – 6 aa ) were formed, including the trans monovinyl product, either complexed within a novel Cu^I dimer ( 2 aa ) or as the free species ( 3 aa ), and a divinyl species ( 6 aa ); both 3 aa and 6 aa underwent cyclisation by an aza‐Michael reaction to give fused heterocycles 4 aa and 5 aa , respectively. With styrene, only trans mono‐ and divinylation products were observed, whereas with methyl vinyl ketone, a stronger Michael acceptor, only cyclised oxidative coupling products were formed. Density functional theory calculations were performed to characterise the different migratory insertion and β‐H transfer steps implicated in the reactions of 1 a with methyl acrylate and styrene. The calculations showed a clear kinetic preference for 2,1‐insertion and the formation of trans vinyl products, consistent with the experimental results.