Assessing the exchange coupling in binuclear lanthanide(iii) complexes and the slow relaxation of the magnetization in the antiferromagnetically coupled Dy2 derivative

We report here the synthesis and the investigation of the magnetic properties of a series of binuclear lanthanide complexes belonging to the metallacrown family. The isostructural complexes have a core structure with the general formula [Ga₄Ln₂(shi^3–)₄(Hshi^2–)₂(H₂shi^–)₂(C₅H₅N)₄(CH₃OH)_x(H₂O)_x]·xC₅H₅N·xCH₃OH·xH₂O (where H₃shi = salicylhydroxamic acid and Ln = Gd^III1; Tb^III2; Dy^III3; Er^III4; Y^III5; Y^III_0.9Dy^III_0.16). Apart from the Er-containing complex, all complexes exhibit an antiferromagnetic exchange coupling leading to a diamagnetic ground state. Magnetic studies, below 2 K, on a single crystal of 3 using a micro-squid array reveal an opening of the magnetic hysteresis cycle at zero field. The dynamic susceptibility studies of 3 and of the diluted DyY 6 complexes reveal the presence of two relaxation processes for 3 that are due to the excited ferromagnetic state and to the uncoupled Dy^III ions. The antiferromagnetic coupling in 3 was shown to be mainly due to an exchange mechanism, which accounts for about 2/3 of the energy gap between the antiferro- and the ferromagnetic states. The overlap integrals between the Natural Spin Orbitals (NSOs) of the mononuclear fragments, which are related to the magnitude of the antiferromagnetic exchange, are one order of magnitude larger for the Dy₂ than for the Er₂ complex.     

Online process control of acidic texturisation baths with ion chromatography

Etching of silicon with mixtures of hydrofluoric acid and nitric acid is a widely used process in silicon solar cell fabrication. One precondition for an optimized usage of the acidic etching baths is the exact knowledge of the chemical bath composition. In this paper, we investigated a fast and online-capable method for the total analysis of all bath constituents by ion chromatography. The chromatographical system consists of a low-volume injection valve, which injects the concentrated samples directly into the KOH-based eluent. After separation and detection of nitrate and fluoride, a post-column derivatization with sodium molybdate is applied to detect the hexafluorosilicic acid, which enriches in the texturisation bath during the etching process. The results of the presented approach are discussed and compared with already published chromatographical and titration methods found in literature.     

Electronic structure and solvation of copper and silver ions: a theoretical picture of a model aqueous redox reaction

Electronic states and solvation of Cu and Ag aqua ions are investigated by comparing the Cu(2+) + e(-)--> Cu(+) and Ag(2+) + e(-)--> Ag(+) redox reactions using density functional-based computational methods. The coordination number of aqueous Cu(2+) is found to fluctuate between 5 and 6 and reduces to 2 for Cu(+), which forms a tightly bound linear dihydrate. Reduction of Ag(2+) changes the coordination number from 5 to 4. The energetics of the oxidation reactions is analyzed by comparing vertical ionization potentials, relaxation energies, and vertical electron affinities. The model is validated by a computation of the free energy of the full redox reaction Ag(2+) + Cu(+) --> Ag(+) + Cu(2+). Investigation of the one-electron states shows that the redox active frontier orbitals are confined to the energy gap between occupied and empty states of the pure solvent and localized on the metal ion hydration complex. The effect of solvent fluctuations on the electronic states is highlighted in a computation of the UV absorption spectrum of Cu(+) and Ag(+).     

Theoretical investigation of paramagnetic NMR shifts in transition metal acetylacetonato complexes: analysis of signs, magnitudes, and the role of the covalency of ligand-metal bonding

Ligand chemical shifts are calculated and analyzed for three paramagnetic transition metal tris-acetylacetonato (acac) complexes, namely high-spin Fe(III) and Cr(III), and low-spin Ru(III), using scalar relativistic density functional theory (DFT). The signs and magnitudes of the paramagnetic NMR ligand chemical shifts are directly related to the extent of covalent acac oxygen-to-metal σ donation involving unoccupied metal valence d(σ) acceptor orbitals. The role of delocalization of metal-centered spin density over the ligand atoms plays a minor secondary role. Of particular interest is the origin of the sign and magnitude of the methyl carbon chemical shift in the acac ligands, and the role played by the DFT delocalization error when calculating such shifts. It is found that the α versus β spin balance of oxygen σ donation to metal valence d acceptor orbitals is responsible for the sign and the magnitude of the ligand methyl carbon chemical shift. A problematic case is the methyl carbon shift of Fe(acac)(3). Most functionals produce shifts in excess of 1400 ppm, whereas the experimental shift is approximately 279 ppm. Range-separated hybrid functionals that are optimally tuned for Fe(acac)(3) based on DFT energetic criteria predict a lower limit of about 2000 ppm for the methyl carbon shift of the high-spin electronic configuration. Since the experimental value is based on a very strongly broadened signal it is possibly unreliable.     

Impact of sugar stereochemistry on natural killer T cell stimulation by bacterial glycolipids

Natural killer T (NKT) cells recognize glycolipids produced by Sphingomonas bacteria, and these glycolipids contain C6-oxidized sugars, either glucuronic acid or galacturonic acid, linked to ceramides. Glycolipids with gluco stereochemistry are the most prevalent. Multiple studies have demonstrated that galactosylceramides are more potent stimulators of NKT cells than their glucose isomers. To determine if this stereoselectivity is retained in the context of the C6-oxidized sugars found in bacterial glycolipids, we prepared two sets of gluco and galacto-glycolipids oxidized at their C6 positions and compared their NKT stimulatory properties. In the context of carboxylic acid groups at C6, gluco stereochemistry gave the more potent responses. We also prepared bacterial glycolipids containing more complex ceramide groups to determine if these chains impact NKT cell responses.     

Diastereo‐ and Enantioselective Synthesis of Organometallic Bis(helicene)s by a Combination of C?H Activation and Dynamic Isomerization

Homochiral and heterochiral cis‐bis‐cycloplatinated‐[6]helicene derivatives 1 b^{1, 2} , as representative examples of platina[6]helicenes that share a common platinum center, have been prepared. A diastereo‐ and enantioselective synthesis, which combines CH activation and dynamic isomerization from heterochiral structure 1 b² into homochiral structure 1 b¹ , is also described. Overall, this isomerization process results in the transfer of chiral information from one helicene moiety to the other one. The chiroptical properties of homochiral (P)‐ and (M)‐ 1 b¹ were greatly modified upon oxidation into their corresponding (P)‐ and (M)‐diiodo‐Pt^IV complexes ( 5 ). The changes were also analyzed by performing theoretical calculations. C? H activation in the synthesis of organometallic helicenes is further demonstrated by the preparation of cis‐bis‐cycloplatinated‐[8]helicene 1 c .     

Templated‐Assembly of CsPbBr3 Perovskite Nanocrystals into 2D Photonic Supercrystals with Amplified Spontaneous Emission

Perovskite nanocrystals (NCs) have revolutionized optoelectronic devices because of their versatile optical properties. However, controlling and extending these functionalities often requires a light‐management strategy involving additional processing steps. Herein, we introduce a simple approach to shape perovskite nanocrystals (NC) into photonic architectures that provide light management by directly shaping the active material. Pre‐patterned polydimethylsiloxane (PDMS) templates are used for the template‐induced self‐assembly of 10 nm CsPbBr₃ perovskite NC colloids into large area (1 cm²) 2D photonic crystals with tunable lattice spacing, ranging from 400 nm up to several microns. The photonic crystal arrangement facilitates efficient light coupling to the nanocrystal layer, thereby increasing the electric field intensity within the perovskite film. As a result, CsPbBr₃ 2D photonic crystals show amplified spontaneous emission (ASE) under lower optical excitation fluences in the near‐IR, in contrast to equivalent flat NC films prepared using the same colloidal ink. This improvement is attributed to the enhanced multi‐photon absorption caused by light trapping in the photonic crystal.     

Highly Luminescent Cesium Lead Halide Perovskite Nanocrystals with Tunable Composition and Thickness by Ultrasonication

We describe the simple, scalable, single‐step, and polar‐solvent‐free synthesis of high‐quality colloidal CsPbX₃ (X=Cl, Br, and I) perovskite nanocrystals (NCs) with tunable halide ion composition and thickness by direct ultrasonication of the corresponding precursor solutions in the presence of organic capping molecules. High angle annular dark field scanning transmission electron microscopy (HAADF‐STEM) revealed the cubic crystal structure and surface termination of the NCs with atomic resolution. The NCs exhibit high photoluminescence quantum yields, narrow emission line widths, and considerable air stability. Furthermore, we investigated the quantum size effects in CsPbBr₃ and CsPbI₃ nanoplatelets by tuning their thickness down to only three to six monolayers. The high quality of the prepared NCs (CsPbBr₃) was confirmed by amplified spontaneous emission with low thresholds. The versatility of this synthesis approach was demonstrated by synthesizing different perovskite NCs.