Reaction of 2,5-diphenyl-1,2,3-diazaarsole with 2-diazopropane

Conclusions The reaction of 2-diazopropane with 2,5-diphenyl-1,2,3-diazaarsole (I) gave 2,4-di-phenyl-6,6-dimethyl-1-arsa-2,3-diazabicyclo[3.1.0]hex-3-ene (III).Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 1, pp. 230–231, January, 1986.The authors thank R. M. Mukhamadeeva and P. N. Sobolev for taking the spectra.     

Chemiluminescence flow system for the determination of ammonium ion

A novel chemiluminescence (CL) system for ammonium ion combined with flow-injection analysis is presented in this paper. It is based on the CL reaction between luminol, immobilized electrostatically on an anion-exchange column, and chlorine electrochemically generated on-line via a platinum electrode from hydrochloric acid in a coulometric cell. Ammonium ion reacts with chlorine and decreases the observed CL intensity. The system responds linearly to ammonium ion concentration in the range 1.0-100 muM, and the detection limit is 0.4 muM. A complete analysis, including sampling and washing, could be performed in 1 min with a relative standard deviation of <6.0%. The system is stable for over 500 determinations and has been applied successfully to the determination of ammonium ion in rainwater samples.     

ESR.-Spektrum von Diphenylpicrylhydrazyl (DPPH)

The ESR. sprectra of DPPH in mixed organic solvents have been measured with a K-band superheterodyne spectrometer and self-locking magnetometer with high precision. Approximately 150 lines have been resolved in the spectra. Both the zero and first order derivative spectra were analyzed by a line shape analysis program for determination of the coupling constants. The smallest coupling constant was found to be 377 ± 5 mG, all other coupling parameter are multiples of this constant. A set of most probable coupling constants is given. The two nitrogen coupling constants are found to be equal within experimental error, and there exist several rotational relations and several possible assignments.     

Theoretical and experimental studies of the electrochemistry of <Emphasis Type="Italic">p</Emphasis>-aminophenol on a golden electrode

The geometric parameters, vibrational frequencies, and thermochemical values of p-quinonimine (p-AQ) and p-aminophenol (p-AP) were computed ab initio (IIF) and by the density functional theory (DFT) method with the 6-31G(d, p) basis set. Cyclic voltammetry with a golden electrode of p-AP solutions in phosphate buffers at pH 7.30 showed that the standard electrode potential of half reaction for p-QI and p-AP was 0.728 V. The standard electrode potentials of half reactions for p-QI and p-AP were calculated using the free energies and solvation energies of p-QI, p-AP, p-benzoquinone (p-BQ), and hydroquinone (p-HQ). The results showed that the standard electrode potential of half reaction for p-QI and p-AP was 0.743 V at the B3LYP/6-31G(d, p) level and 0.755 V at the HF/6-31G(d, p) level. The standard electrode potentials computed at the B3LYP/6-31G(d, p) and HF/6-31G(d, p) levels were close to their experimental values. The article is published in the original.     

Blends of propylene-ran-ethylene and propylene-ran-(1-butene) copolymers: Crystal superstructure and mechanical properties

Blends of isotactic propylene-ran-ethylene (EP) and propylene-ran-(1-butene) (BP) copolymers with various comonomer content (2-3.1 wt.% ethylene, 9.9 wt.% 1-butene), were prepared in Brabender internal mixer at various compositions (25/75, 50/50, 75/25). Static, impact and dynamic mechanical behavior of copolymers and their blends was investigated. The crystalline structure was studied by DSC and SAXS analysis. For all copolymers the lamellar thickness, crystallinity degree and glass transition temperature are lower than those of iPP homopolymer, depending on the comonomer content. It was found that the copolymers exhibit improved impact strength as compared to plain iPP, due to lower crystallinity and higher mobility of chains within amorphous component. Moreover, the elastic modulus as well as the yield behavior of the examined samples resulted to depend primarily on the amount of the crystalline phase and the thickness of the lamellar crystals, respectively. A linear dependence of yield stress on the logarithm of reciprocal lamellar thickness was observed for blends and copolymers, supporting the concept of thermal nucleation of dislocations which control the crystallographic slip processes initiated at the yield point. The blends of BPS with either EPS or EP2 display complete miscibility in the entire range of composition and their mechanical properties are intermediate between those of plain components, changing gradually with the composition.     

Thermal properties of rare earth elements complexes with 1,3,5-benzenetricarboxylic acid

Summary Rare earth elements 1,3,5-benzenetricarboxylates were prepared as solids of the general formula Ln(C₉H₃O₆)·nH₂O, where n=6 for La-Dy and n=4 for Ho-Lu,Y. Their solubilities in water at 293 K are of the order 10^-4-10^-6 mol dm^-3. The IR spectra of the complexes indicate that the carboxylate groups are bridging and bidentate chelates. Hydrated 1,3,5-benzenetricarboxylates lose water molecules during heating in one step (La-Tb), two steps (Y, Ho-Tm) or three steps (Dy, Yb, Lu). The anhydrous complexes are stable up to 573-742 K and decompose to oxides (Ce-Lu) at higher temperatures.     

Chemische synthese von nonadesoxyribonucleotiden mit den abgewandelten basen uracil, 5-bromuracil und 5-methylcytosin nach dem triester-verfahren

In order to investigate the interaction of Eco RII restriction and modification enzymes with synthetic DNA fragments three nonadeoxyribonucleotides containing the modified bases uracil, 5-bromouracil and 5-methylcytosine were synthesized according to the phosphate tri-ester approach using TPS/l-methylimidazole as the condensation agent. The patterns of these modified DNA fragments obtained by Maxam/Gilbert sequence technique are presented.     

Parametric analysis of the inductively coupled plasma

A systematic parametric study of an LTE (local thermodynamic equilibrium) mathematical model of pure inductively coupled argon plasma (ICAP) used for spectrochemical purposes was performed by means of computer simulations. The spatial distributions of temperature, gas velocity, magnetic field and energy losses were investigated under typical plasma operating conditions as function of the ICAP geometrical dimensions and dynamic parameters. These theoretical calculations can be used to predict the properties of the applied plasma in the course of practical work, to choose the optimal conditions by changing the operating parameters and to interpret existing analytical results.     

Optimization of performance and minimization of silicate interference in continuous flow phosphate analysis

Specific reaction conditions for automated continuous flow analysis of phosphate are optimized in regard to minimizing coating and silicate interference, while maintaining high sensitivity. Use of Sb in the reagent increases sensitivity and yields absorbances with little temperature dependence. Coating can be minimized by using a final solution at a pH>0.5. At final pH of 0.78 there is maximum interference from silicate in the sample. We recommend therefore as an optimal reaction condition with minimal silicate interference, the use of Sb, a final solution pH of 1.00, room temperature for the reaction and a [H(+)]/[Mo] ratio of 70. An equation is provided to correct silicate interference in high precision phosphate determination.