The influence of chitosan on in vitro properties of Eudragit RS microspheres

Eudragit RS microspheres containing chitosan hydrochloride were prepared by the solvent evaporation method using acetone/liquid paraffin solvent system and their properties were compared with Eudragit RS microspheres without chitosan, prepared in our previous study. Different stirring rates were applied (400-1200 rpm) and drug content, Higuchi dissolution rate constant, surface and structure characteristics of the microspheres were determined for each size fraction. An increase in average particle size with a reduction of stirring rate appeared in limited interval in both series. The average particle size of microspheres without chitosan, prepared at the same stirring rate, was smaller. Pipemidic acid content increased with increasing fraction particle size, but not with increasing stirring rate as it was observed for microspheres without chitosan. We presume that high pipemidic acid content in larger microspheres is a consequence of cumulation of undissolved pipemidic acid particles in larger droplets during microspheres preparation procedure. Pipemidic acid release was faster from microspheres with chitosan and no correlation between Higuchi dissolution rate constant and stirring rate or fraction particle size was found, though it existed in the system without chitosan. Structure and surface characteristics of microspheres observed by scanning electron microscope (SEM) were not changed significantly by incorporation of chitosan. But in contrast with microspheres without chitosan, the surface of chitosan microspheres was more porous after three hours of dissolution. It is supposed that the influence of particle size fraction and stirring rate on release characteristics is expressed to a great extent through porosity and indirectly through total effective surface area, but the incorporation of highly soluble component i.e. chitosan salt hides these effects on drug release. In conclusion, changes in biopharmaceutical properties due to varying stirring rate and fraction particle size exhibited the same direction as those reported for the microspheres without chitosan, although they are less expressed because of increased experimental variability, likely caused by chitosan.     

Diffuse reflectance spectroscopy—Important developments

Effect of front surface reflectance is incorporated into standard Kubelka-Munk theory of diffuse reflection. A method of obtaining the absorption coefficient independent of scattering coefficient is presented.     

Adsorption configuration and local ordering of silicotungstate anions on Ag(100) electrode surfaces

X-ray reflectivity, cyclic voltammetry, and scanning tunneling microscopy (STM) are used to examine the structure of alpha-SiW12O4(4-) or silicotungstic acid (STA) adsorbed on Ag(100) in acid solution. The voltammetry shows that STA passivates the Ag surface relative to electron transfer to a solution redox species. STM images reveal the formation of a series of lattice structures, one of which can be associated with a commensurate ( radical13x radical13)R33.69 degrees structural model. X-ray reflectivity measurements show uniquely that STA orients with its four-fold axis perpendicular to the Ag(100) surface and that the center of the STA molecule is 4.90 A above the top layer of the Ag substrate. Analysis of bond lengths leads to a footprint of STA on Ag(100), in which the four terminal O atoms are located near the hollow sites and have a Ag-O bond length of 2.06 A. This bond length is consistent with a strong covalent interaction between STA and the Ag surface.     

Ferrocene Compounds. XXXI. Structure of 3-Ferrocenylpropanoic Acid

The title compound was prepared by modified procedure and characterized by means of IR, [¹H] and [¹³C] NMR spectroscopy. The structure was also determined by a single-crystal X-ray diffraction (XRD). 3-Ferrocenylpropanoic acid crystallizes as orange prisms in the triclinic space group P with a = 7.645(1) Å, b = 7.953(1) Å, c = 9.961(1) Å, = 81.67(1), = 68.43(1), = 83.76(1), V = 556.3(1) ų, Z = 2, R = 0.0435. In the ferrocene skeleton, Fe-C distances are in the range 2.033(2)–2.052(2) Å and C C distances in the range 1.412(5)–1.431(3) Å. The angle defined by ring centers and Fe atom is 177.7(1). The cyclopentadienyl rings are twisted from the eclipsed conformation by 8.3(2) (average value). In the structure was observed strong intermolecular hydrogen bond of 2.670(3) Å forming cyclic dimers of the R₂ ² (8) type.     

Decationization and dealumination of clinoptilolite tuff and ammonium exchange on acid-modified tuff

The paper presents results of investigation of exchange of the clinoptilolite tuff cations with hydrogen ions from HCl solution of concentration 0.1 mmol cm(-3) and ammonium ions solutions of concentrations 0.0071 to 2.6 mmol cm(-3). Molal concentrations, x (mmol g(-1)) of cations exchanged in acid solution and in ammonium ions solutions were compared with molal concentrations of cations obtained by determination of the cation-exchange capacity of clinoptilolite tuff. The obtained results show that at ammonium ion concentrations lower than 0.1 mmol cm(-3), with regard to exchange capacity for particular ions, best exchanged are Na+ ions, followed by Mg2+ and Ca2+ ions, while exchange of K+ ions is the poorest (Na+ > Mg2+ > Ca2+ > K+). At ammonium concentrations from 0.2 to 1 mmol cm(-3) the order is Na+ > Ca2+ > Mg2+ > K+. At concentrations higher than 1 mmol cm(-3) the order is Na+ > Ca2+ > K+ > Mg2+. The results are a consequence of the uptake of hydrogen ions by zeolite samples in ammonium ions solutions at concentrations lower than 1 mmol cm(-3) and indicate the importance of Mg2+ (besides Na+ ions) for the exchange between clinoptilolite cations and H+ ions, in contrast to K+ ions, whose participation in the reaction with H+ ions is the lowest. During decationization of the clinoptilolite in acid solution, best exchanged are Na+, Mg2+, and Ca2+ ions, while exchange of K+ ions is the poorest. Due to poor exchange of K+ and H+ ions and good exchange of Na+, Mg2+, and Ca2+ ions, it is to be assumed that preservation of stability of the clinoptilolite structure is caused by K+ ions present in the channel C. Clinoptilolite is dissolved in the clinoptilolite A and B channels where Na+, Mg2+, and Ca2+ ions are present. On the acid-modified clinoptilolite samples, exchange of ammonium ions is poorer than on natural zeolite. The longer the contact time of the zeolite and acid solution, the worse ammonium ions exchange. It can be assumed that H+ ions exchanged with zeolite cations are consumed for solution of aluminum in the clinoptilolite structure; therefore the concentration of H+ ions as exchangeable cations decreases. In the ammonium ion solution at a concentration of 0.0065 mmol cm(-3), from the acid-modified zeolite samples, Al3+ ions are exchanged best, followed by Na+, Mg2+, Ca2+, and K+ ions. Further to the results, it is to be assumed that exchangeable Al3+ ions available from clinoptilolite dissolution are best exchanged with H+ ions in acid solution.     

Distribution of fallout radionuclides through soil surface layer

The distribution of¹³⁷Cs through soil layers has been investigated by field sampling. The investigation deals with¹³⁷Cs concentration found after the Chernobyl accident. The relationship between important soil characteristics, total precipitation and cesium distribution are analyzed. Cesium is strongly sorbed in the top soil layer and its migration downward is limited. Measurements performed over a 3-year period revealed that approximately 20–38 per cent of total¹³⁷Cs is located in the upper soil layer.     

Metal—metal bonding in dinuclear complexes of platinum(I). The crystal and molecular structure of carbonyl(chloro)-bis-μ-[bis(diphenylphosphino)methane]diplatinum hexafluorophosphate

The structure of [Pt₂Cl(CO) (μ-Ph₂PCH₂PPh₂)₂] [PF₆] was determined by $\text{X}$-ray methods and refined to $\text{R}$ = 0.082, using diffractometric intensities of 5646 independent reflections. The crystals are monoclinic, space group $\text{P}$2₁/$\text{n}$, $\text{a}$ = 12.919(3), $\text{b}$ = 15.576(6), $\text{c}$ = 25.151(5)Å, β = 94.82(3)°, $\text{Z}$ = 4. They are built of octahedral hexafluorophosphate anions and dinuclear platinum(I) cations. The latter contain PtCl and PtCO fragments linked to one another by a PtPt σ-bond and by two bridging bis(diphenylphosphino)methane ligands. The platinum atoms are in square planar environments and the dihedral angle between the two coordination planes is 40.1°. Selected bond lengths are: PtPt 2.620(1), PtCl 2.384(5), PtC 1.89(3) and PtP 2.291(5) – 2.308(5)Å.     

Potentiometric response of a commercial (Ag2S+PbS)-membrane selective electrode to Hg(II) in aqueous solution

Summary The preparation and performance of an Hg(II)-ISE are described. The analytical behaviour of this electrode, made by chemical treatment of a commercial silver sulphide type Pb(II)-ISE, is discussed in terms of potentialvs. concentration curves, potentialvs. pH curves, and selectivity. The response to fixed c_Hg(II) as the pH is increased in the alkaline region corresponds to decrease in the free Hg²⁺concentration down to pHg 17. The estimated limit of detection of total Hg(II) concentration is 10^–5 M.

---

Potentiometrisches Verhalten einer handelsüblichen (Ag₂S+PbS)-Membran-Elektrode gegenüber Hg(tt) in wäßriger Lösung

Zusammenfassung Herstellung und Wirkungsweise einer gegen Hg(II) ionenselektiven Elektrode wurde beschrieben. Das analytische Verhalten dieser Elektrode, die sich durch chemische Behandlung einer handelsüblichen Silbersulfidelektrode, die für Pb(II)-Ionen selektiv ist, herstellen läßt, wurde an Hand von Potential-Konzentrationskurven, Potential-pH-Kurven und ihrer Selektivität diskutiert. Das Verhalten gegenüber fixemc _Hg(ii)bei Anstieg des pH ins alkalische Gebiet korrespondiert mit der Abnahme der Konzentration an freien Hg²⁺-ionen bis herab zu pHg 17. Die Nachweisgrenze liegt schätzungsweise bei einer totalen Hg(II)-Konzentration von 10^–5 M.

---

---

Presented at the Fifth European Conference on Analytical Chemistry (EUROANALYSIS-V), Cracow, Poland, 26–31 August, 1984.     

On general relations in relativistic kinematics and some of their applications

Two vector fields are considered, a timelike one,u , and an arbitrary one, . The relative expansion and rotation are defined with respect to these fields, their mutual relations are studied, and some general formulas obtained. Applications are made, first to vector fields which are mutually nonrotating in a plane-symmetric metric, then to the electromagnetic field of an arbitrary magnetohydrodynamic fluid.     

Electrochemical generation of manganese(III) and behaviour of the generated oxidant in acetic acid in the presence of perchlorate ions

Summary Research was carried out to determine conditions for the anodic generation of manganese(III) with high current efficiency in solutions of sodium perchlorate in acetic acid, and to examine the behaviour of the oxidant thus generated. The effects of water and acetic anhydride on current efficiency in the generation of the oxidant was also examined. The formal redox potential of the Mn(III)/ Mn(II) system is decreased with increasing concentrations of sodium acetate in the solution. The effect of sodium perchlorate and perchloric acid concentrations is the reverse. Procedures for coulometric titrations of a number of substances with the generated oxidant were developed, end point being detected using biamperometric and potentiometric methods. Perchloric acid accelerates the oxidation of certain substances with manganese(III) in acetic acid and increases the sensitivity of end-point detection using the potentiometric method.

---

Elektrochemische Erzeugung von Mangan(III) und das Verhalten dieses Oxydationsmittels in Essigsäure bei Gegenwart von Perchlorat

Zusammenfassung Die Bedingungen der anodischen Erzeugung von Mangan(III) mit hoher Stromausbeute in Essigsäure, nach Zugabe von Natriumperchlorat wurden untersucht; das elektrochemische Verhalten des so dargestellten Oxydationsmittels wurde ebenfalls untersucht. Der Einfluß von Wasser und Essigsäureanhydrid auf die prozentuelle Stromausbeute des erwähnten Oxydationsmittels wurde verfolgt. Das Formalredoxpotential des Systems Mn(III)/ Mn(II) sinkt bei Erhöhung der Konzentration an Natriumacetat in der Lösung. Perchlorsäure wie auch Natriumperchlorat üben eine entgegengesetzte Wirkung aus und führen zur Steigerung des Formalredoxpotentials bei Erhöhung ihrer Konzentration. Verfahren zur coulometrischen Titration verschiedener Substanzen mittels biamperometrischer oder potentiometrischer Erfassung des Titrationsendpunktes wurden ausgearbeitet. In Gegenwart von Perchlorsäure wächst die Geschwindigkeit der Oxydation einiger Substanzen in Essigsäure in Gegenwart von Mn(III) und auch die Empfindlichkeit der Endpunktbestimmung verbessert sich.

---

---

Presented at the 9th International Symposium on Microchemical Techniques, Amsterdam, August 28–September 2, 1983.