Influence of structure and solubility of chain transfer agents on the RAFT control of dispersion polymerisation in scCO2

Reversible addition–fragmentation chain transfer (RAFT) dispersion polymerisation of methyl methacrylate (MMA) is performed in supercritical carbon dioxide (scCO₂) with 2-(dodecylthiocarbonothioylthio)-2-methylpropionic acid (DDMAT) present as chain transfer agent (CTA) and surprisingly shows good control over PMMA molecular weight. Kinetic studies of the polymerisation in scCO₂ also confirm these data. By contrast, only poor control of MMA polymerisation is obtained in toluene solution, as would be expected for this CTA which is better suited for acrylates. In this regard, we select a range of CTAs and use them to determine the parameters that must be considered for good control in dispersion polymerisation in scCO₂. A thorough investigation of the nucleation stage during the dispersion polymerisation reveals an unexpected “in situ two-stage” mechanism that strongly determines how the CTA works. Finally, using a novel computational solvation model, we identify a correlation between polymerisation control and degree of solubility of the CTAs. All of this ultimately gives rise to a simple, elegant and counterintuitive guideline to select the best CTA for RAFT dispersion polymerisation in scCO₂.

RAFT dispersion polymerisation of methyl methacrylate is performed in scCO₂ with 2-(dodecylthiocarbonothioylthio)-2-methylpropionic acid (DDMAT) present as chain transfer agent (CTA) and surprisingly shows good control over PMMA molecular weight.     

Intact size-selected Au(n) clusters on a TiO2(110)-(1 x 1) surface at room temperature

Experiments in which mass-selected gold clusters were deposited on a surface have found that the catalytic properties depend strongly on cluster size. However, these experiments have not established definitively that the clusters maintain their size after deposition. We report here work in which we deposit low kinetic energy, mass-selected Aun+ (n = 1-8) clusters on a rutile TiO2(1 x 1) surface and use ultrahigh vacuum scanning tunneling microscopy (UHV-STM) to determine their size and shape.     

Recyclable polyurea-microencapsulated Pd(0) nanoparticles: an efficient catalyst for hydrogenolysis of epoxides

[reaction: see text] Pd nanoparticles (approximately 2 nm in size) microencapsulated in polyurea is an efficient and recyclable catalyst for reductive ring-opening hydrogenolysis of epoxides, using either HCOOH/Et(3)N or H(2) as a hydrogen donor.     

Elution of organic solutes from different polarity sorbents using subcritical water

The intermolecular interactions between organic solutes and sorbent matrices under subcritical water conditions have been investigated at a pressure of 50 bar and temperatures ranging from 50 to 250°C. Both polar and nonpolar organics (chlorophenols, amines, n-alkanes, and polycyclic aromatic hydrocarbons) and five different sorbent matrices (glass beads, alumina, Florisil, silica-bonded C₁₈, and polymeric XAD-4 resins) were used. From the same matrix, the polar solutes always eluted at lower temperatures, while the moderately polar and nonpolar solutes only eluted at higher temperatures. Similar to matrix effects previously observed using supercritical carbon dioxide, the sorbent type greatly influenced the elution efficiency under subcritical water conditions. Lower temperatures are sufficient to elute a particular solute from glass beads, alumina, and Florisil, but higher temperatures (less polar water) are needed to elute the same solute from silica-bonded C₁₈. The highest temperatures were required to elute aromatic organics from XAD-4. These matrix effects demonstrate that, while low temperature water can break inert or dipole interactions between solutes and glass beads, alumina, and Florisil, higher temperature water is required to interrupt the van der Waals attractions between solutes and silica-bonded C₁₈, and even higher temperatures needed to overcome the π-electron interactions between aromatic solutes and XAD-4.     

ULTRAVIOLET RADIATION - INDUCED MALIGNANT MELANOMA IN Monodelphis domestica

Several lines of evidence support the hypothesis that ultraviolet radiation (UVR) is involved in the etiology of cutaneous melanoma in humans. However, progress in understanding the mechanisms involved in induction of melanotic tumors by UVR has been hindered by lack of a suitable animal model. During the course of multiple exposures (3 times/wk for 70 wk) of the South American opossum, Monodelphis domestica, to UVR, we first observed the appearance of areas of dermal melanocytic hyperplasia (MH) on the exposed skin. Post-UVR exposure to photoreactivating light (320-500 nm) suppressed the occurrence of MH. We also observed at 100 weeks from first exposure that 10 of 46 surviving animals had developed melanotic tumors which arose, presumably, from areas of MH. Tumors on three of the 10 animals have been classified as malignant melanomas based on metastasis to lymph nodes. We conclude from these results that UVR can act as a complete carcinogen for melanoma induction and, based on the photoreactivation of MH induction, that DNA damage is involved in melanoma formation.     

Mechanistic studies of nickel(II) alkyl agostic cations and alkyl ethylene complexes: investigations of chain propagation and isomerization in (alpha-diimine)Ni(II)-catalyzed ethylene polymerization

The synthesis of a series of (alpha-diimine)NiR(2) (R = Et, (n)Pr) complexes via Grignard alkylation of the corresponding (alpha-diimine)NiBr(2) precursors is presented. Protonation of these species by the oxonium acid [H(OEt(2))(2)](+)[BAr'(4)](-) at low temperatures yields cationic Ni(II) beta-agostic alkyl complexes which model relevant intermediates present in nickel-catalyzed olefin polymerization reactions. The highly dynamic nature of these agostic alkyl cations is quantitatively addressed using NMR line broadening techniques. Trapping of these complexes with ethylene provides cationic Ni alkyl ethylene species, which are used to determine rates of ethylene insertion into primary and secondary carbon centers. The Ni agostic alkyl cations are also trapped by CH(3)CN and Me(2)S to yield Ni(R)(L)(+) (L = CH(3)CN, Me(2)S) complexes, and the dynamic behavior of these species in the presence of varied [L] is discussed. The kinetic data obtained from these experiments are used to present an overall picture of the ethylene polymerization mechanism for (alpha-diimine)Ni catalysts, including effects of reaction temperature and ethylene pressure on catalyst activity, polyethylene branching, and polymer architecture. Detailed comparisons of these systems to the previously presented analogous palladium catalysts are made.     

Polymerization of pyromellitic dianhydride with 3,3′-diaminobenzidine in aprotic solvents I. Reaction variables

The solution polymerization of pyromellitic dianhydride with 3,3′-diaminobenzidine to form poly(amide acid amine) was investigated under a variety of reaction conditions. Polymer viscosity and gel formation were highly affected by changes in the order of monomer addition, the type of process (powder or solution), monomer concentration, monomer stoichiometry, and type of solvent. Minor effects were noted with changes in polymerization temperature and the presence of small amounts of water. A limiting intrinsic viscosity of 1.2–1.5 dl/g was observed, regardless of polymerization conditions. The polymerization had a strong tendency to gel at high concentrations and when monomer molar ratios approached 1:1. The conditions which retarded or promoted the formation of macrogel were well-defined, and macrogel but not microgel could be prevented. The polymerization was conducted successfully only in aprotic solvents. No imidazopyrrol-one units were detected in polymer made in polyphosphoric acid at elevated temperatures.     

Simplified electron ejection in Fourier transform ion cyclotron resonance mass spectrometry by suspended trapping

Suspended trapping is used to eject electrons in negative-ion Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometric experiments. In contrast to electron ejection by resonant excitation of the trapping motion, suspended trapping involves allowing the electrons to escape along the z-axis (perpendicular to the trap plates) while the trapping potential is briefly removed. The duration of this event is sufficiently short (～10 μs) so that ion losses are negligible; the overall effect is that of a ‘high-pass mass filter’. Suspended trapping is simpler to implement and more generally applicable to various cell geometries than resonant electron ejection. The effectiveness of the suspended trapping technique is not compromised by the anharmonicity of the potential well in ‘elongated’ ICR traps, but depends simply on the time it takes the electrons to escape the cell. Finally, a small, positive offset potential (～+0.25 V) applied to the trap plates during the suspended trapping event increases the efficiency of the ejection.     

A novel synthesis of substituted 4H-pyrazolo[3,4-d]pyrimidin-4-ones

A novel synthesis of 4H-pyrazolo-[3,4-d]pyrimidin-4-ones is described. This approach utilizes an in situ generated iminochloride as a key precursor for amidine formation, with subsequent base-catalyzed ring closure. This method represents a mild and efficient entry into this ring system which is amenable to diversification of the core template.